Using Optional Accessories
Shutter Remote Control (Optional)
AC Adaptor (Optional)/DC Coupler (Optional)
For information on the external flash (Using an External Flash (Optional))
For information on the external microphone (External Microphones (Optional))
For information on the XLR Microphone Adaptor (XLR Microphone Adaptor (Optional))
Some optional accessories may not be available in some countries.
Battery Grip (Optional)
When mounted on the camera, the Battery Grip (DMW-BGGH5: optional) improves ease of operation and grip when the camera is held vertically.
Also, inserting a battery (DMW-BLK22) into the Battery Grip provides a stable supply of power even for long periods of recording.
Selecting Battery Usage Priority
Selects which battery to use first when the batteries are installed in both the camera and the Battery Grip.
Getting started:
Turn the camera off, and remove the cover for the battery grip connector.
-
Attach the Battery Grip to the camera.
-
Turn on the camera.
-
Set the battery use priority.
[] [] [Battery Use Priority]
[BODY]
The battery in the camera is used first.
[BG]
The battery in the Battery Grip is used first.
When the battery in the Battery Grip is used, [] is displayed on the monitor. You can register functions of your choice to the [Fn] button on the Battery Grip. (Fn Buttons) The [WB] button, [ISO] button, [] button and joystick each work the same as the buttons and joystick on the camera body. The [AF/AE LOCK] button on the Battery Grip works the same as the [AF ON] button on the camera body. You can also use DMW-BLF19 (optional), but since it has a smaller battery capacity than DMW-BLK22, it is recommended to use DMW-BLK22. Refer to the operating instructions for the Battery Grip for details. |
Shutter Remote Control (Optional)
You can connect the Shutter Remote Control (DMW-RS2: optional) to use the camera as follows:
Fully pressing the shutter button without camera shake
Securing the shutter button during bulb recording and burst recording
Start/end the video recording
Using the functions registered in the video rec. button of the Shutter Remote Control
Registering Functions to the Video Rec. Button
You can register a favorite function to the video rec. button on a Shutter Remote Control.
The functions that can be registered are the same as the functions that can be registered to the Fn buttons for recording. (Setting Items ([Fn Button Set]/[Setting in REC mode]))
[Video Record] is registered in the default setting.
[] [] Select [Video Rec. Button (Remote)]
Register functions using the same operations as [Fn Button Set]. (Fn Buttons)
Always use a genuine Panasonic Shutter Remote Control (DMW-RS2: optional). Refer to the operating instructions for the Shutter Remote Control for details. |
Tripod Grip (Optional)
Attach a Tripod Grip (DMW-SHGR1: optional) to use it as a grip for recording while walking, a tripod, or a Shutter Remote Control.
Connect the grip cable to the [REMOTE] socket on the camera.
Always use a genuine Panasonic Tripod Grip (DMW-SHGR1: optional). The [Video Rec. Button (Remote)] menu does not work with the Tripod Grip. Do not carry just by holding the hand strap when the camera is attached. For details, refer to the operating instructions for the Tripod Grip. |
AC Adaptor (Optional)/DC Coupler (Optional)
With an AC Adaptor (DMW-AC10: optional) and DC Coupler (DMW-DCC17: optional), you can perform recording and playback without worrying about the remaining battery charge.
Be sure to purchase both an AC Adaptor and a DC Coupler as a set. They cannot be used independently of one another. When the DC Coupler is being mounted, the DC Coupler cover opens, so the structure ceases to be dust and splash resistant. Do not allow sand, dust and water droplets to adhere to or enter the camera. After use, confirm that no foreign objects are adhering to the DC Coupler cover, then firmly close the cover. For details, refer to the operating instructions for the AC Adaptor and DC Coupler. |