Audio Settings
[Sound Rec Level Disp.]
The sound recording level is displayed on the recording screen.
[] [] Select [Sound Rec Level Disp.]
Settings: [ON]/[OFF]
When [Sound Rec Level Limiter] is set to [OFF], [Sound Rec Level Disp.] is fixed to [ON]. |
[Mute Sound Input]
This mutes audio input.
[] [] Select [Mute Sound Input]
Settings: [ON]/[OFF]
[] is displayed on the recording screen. The audio input from the external microphone will also be muted. |
[Sound Rec Gain Level]
This switches the gain of audio input.
[] [] Select [Sound Rec Gain Level]
[STANDARD] |
This is the standard input gain setting. (0 dB) |
[LOW] |
Audio input is reduced for recording in environments with loud noises. (12 dB) |
[Sound Rec Level Adj.]
Manually adjust the sound recording level.
-
Select [Sound Rec Level Adj.].
[] [] [Sound Rec Level Adj.]
-
Press to adjust the sound recording level and then press or .
You can adjust the sound recording level within the range from [MUTE], [18dB] to [12dB] in steps of 1 dB.
Displayed dB values are approximate.
When set to [MUTE], [] is displayed in the recording screen. |
[Sound Rec Level Limiter]
The sound recording level is adjusted automatically to minimize sound distortion (crackling noise).
[] [] Select [Sound Rec Level Limiter]
Settings: [ON]/[OFF]
[Wind Noise Canceller]
This reduces the wind noise coming into the built-in microphone while maintaining sound quality.
[] [] Select [Wind Noise Canceller]
[HIGH] |
This effectively reduces the wind noise by reducing the low-pitched sound when a strong wind is detected. |
[STANDARD] |
This reduces wind noise without loss of sound quality by filtering out only wind noise. |
[OFF] |
— |
You may not see the full effect depending on the recording conditions. This function works only with the built-in microphone. When an external microphone is connected, [Wind Cut] is displayed. (Reduction of Wind Noise) |
[Lens Noise Cut]
You can reduce the zoom sound produced during video recording when you are using interchangeable lens compatible with power zoom.
[] [] Select [Lens Noise Cut]
Settings: [ON]/[OFF]
When this function is used, the sound quality may differ from that during normal operation. |