Storing on a Recorder
By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos.
Getting started:
Turn on the camera and recorder.
Insert a card into card slot 1.
-
Connect the camera and recorder with the USB connection cable. (USB port)
-
Press to select [PC(Storage)] and then press or .
-
Operate the recorder to store the images.
If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the recorder without the [USB Mode] selection screen being displayed. ([USB]) Take care not to turn off the camera while storage is in progress. Images such as 4K videos may not be supported depending on your recorder. Turn off the camera and disconnect the USB connection cable before removing the card from the camera. Otherwise, the recorded data may be damaged. For the storage and playback procedures, refer to the operating instructions for the recorder. |