[Setup] Menu
[Setup] menu ([Monitor / Display])
[Setup] menu ([Card/File])
: Default settings
[Card Format]
[Card Slot 1]/[Card Slot 2] |
Formats the card (initialization). |
[Double Card Slot Function]
[Recording Method] |
[]/[]/[] |
This sets the way recording to the card slots 1 and 2 is performed. |
[Folder / File Settings]
[Select Folder]/[Create a New Folder]/[File Name Setting] |
Set the folder and file name where to save the images. |
[File Number Reset]
[Card Slot 1]/[Card Slot 2] |
Resets the file number of the next recording to 0001. |
[Copyright Information]
[Artist] |
[ON]/[OFF]/[SET] |
[Copyright Holder] |
[ON]/[OFF]/[SET] |
[Display Copyright Info.] |
|
The registered names of the artist and the copyright holder are recorded in the Exif data of the image. You can register each name from [SET] in [Artist] and [Copyright Holder]. How to enter characters (Entering Characters) Up to 63 characters may be entered. You can confirm registered copyright information in [Display Copyright Info.]. |
[Setup] menu ([Monitor / Display])
: Default settings
[Power Save Mode]
[Sleep Mode] |
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF] |
[Sleep Mode(Wi-Fi)] |
[ON]/[OFF] |
[Auto LVF/Monitor Off] |
[5MIN.]/[2MIN.]/[1MIN.]/[OFF] |
[Power Save LVF Shooting] |
[Time to Sleep] |
[Method of Activation] |
|
This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. ([Power Save Mode]) |
[Monitor Frame Rate]
[30fps]/[60fps] |
Sets the display speed for live view on the monitor when recording pictures. [30fps]: Reduces the power consumption for a longer operating time. [60fps]: Enables smooth display of movements. When the following functions are being used, [Monitor Frame Rate] is not available: – [6K/4K PHOTO] – HDMI output |
[LVF Frame Rate]
[60fps]/[120fps] |
Sets the display speed for live view on the viewfinder when recording pictures. [60fps]: Reduces the power consumption for a longer operating time. [120fps]: Enables smooth display of movements. [LVF120] is displayed on the viewfinder when it is displayed at [120fps]. When the following functions are being used, [LVF Frame Rate] is not available: – [6K/4K PHOTO] – HDMI output |
[Monitor Settings]/[Viewfinder]
[Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] |
This adjusts the brightness, coloring, and red or blue tints of the monitor/viewfinder.
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use. |
[Monitor Backlight]/[LVF Luminance]
[AUTO]/[3] to [3] |
Adjusts monitor/viewfinder luminance. [AUTO]: The brightness is adjusted automatically depending on how bright it is around the camera. Adjusts the monitor luminance when displaying the monitor, and the viewfinder luminance when displaying the viewfinder. When either [AUTO] is set, or the adjusted value is set to positive side, the usage period will shorten. When [Night Mode] is being used, [Monitor Backlight]/[LVF Luminance] are not available. |
[Eye Sensor]
[Sensitivity] |
[HIGH]/[LOW] |
This will set the sensitivity of the eye sensor. |
|
[LVF/Monitor Switch] |
[LVF/MON AUTO] (automatic viewfinder/monitor switching)/[LVF] (viewfinder)/[MON] (monitor) |
This will set the method for switching between the viewfinder and monitor. If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will also switch. |
[Level Gauge Adjust.]
[Adjust.] |
Hold the camera in a horizontal position, and press or . The level gauge will be adjusted. |
[Level Gauge Value Reset] |
Restores the default level gauge setting. |
[Setup] menu ([IN/OUT])
: Default settings
[Beep]
[Beep Volume] |
[] (High)/[] (Low)/[] (Off) |
[AF Beep Volume] |
[] (High)/[] (Low)/[] (Off) |
[AF Beep Tone] |
[] (Pattern 1)/[] (Pattern 2)/[] (Pattern 3) |
[E-Shutter Vol] |
[] (High)/[] (Low)/[] (Off) |
[E-Shutter Tone] |
[] (Pattern 1)/[] (Pattern 2)/[] (Pattern 3) |
Sets the beep sounds, AF beep, and electronic shutter sounds. |
[Headphone Volume]
[0] to [LEVEL15] ([LEVEL3]) |
Adjusts the volume when headphones are connected. (Adjusting the Headphone Volume) This functions in tandem with [Headphone Volume] in the [Video] ([Audio]) menu. |
[Wi-Fi]
[Wi-Fi Function] (15. Wi-Fi/Bluetooth) |
[Wi-Fi Setup] ([Wi-Fi Setup] Menu) |
[Streaming Setup] (16. Streaming Function) |
[Bluetooth]
[Bluetooth] (Connecting to a Smartphone (Bluetooth Connection)) |
[Send Image (Smartphone)] ([Smartphone]) |
[Remote Wakeup] ([Remote Wakeup]) |
[Returning from Sleep Mode] (Shortening the Return Time from [Sleep Mode]) |
[Auto Transfer] ([Auto Transfer]) |
[Location Logging] ([Location Logging]) |
[Auto Clock Set] ([Auto Clock Set]) |
[Wi-Fi network settings] |
[Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points used to connect the camera to Wi-Fi networks will be registered automatically. |
[USB]
[USB Mode] |
[][Select on connection]/[][PC(Storage)]/[][PC(Tether)]/[][PictBridge(PTP)] |
This sets the communication method to be used when the USB connection cable is connected. [][Select on connection]: Select this setting to select the USB communication system when connecting to another device. [][PC(Storage)]: Select this setting to export images to a connected PC. [][PC(Tether)]: Select this setting to control the camera from a PC installed with “LUMIX Tether”. [][PictBridge(PTP)]: Select this setting when connecting to a printer that supports PictBridge. |
|
[USB Power Supply] |
[ON]/[OFF] |
Provides power from the USB connection cable. Even if this item is set to [OFF], power will be supplied when the AC adaptor is connected. |
[Battery Use Priority]
[BODY]/[BG] |
Selects which battery to use first when the batteries are installed in both the camera and the Battery Grip. |
[HDMI Connection]
[Output Resolution(Playback)] |
[AUTO] / [C4K/60p] / [C4K/50p] / [C4K/30p] / [C4K/25p] / [C4K/24p] / [4K/60p] / [4K/50p] / [4K/30p] / [4K/25p] / [4K/24p] / [1080p] / [1080i] / [720p] / [576p] / [480p] |
Sets the HDMI output resolution for playback. [AUTO]: Outputs with a resolution suited to the connected external device. The items you can select depend on the [System Frequency] setting. If no image appears on the external device with [AUTO], switch to a constant setting other than [AUTO] to set a format supported by your external device. (Refer to the operating instructions for the external device.) |
|
[LUT View Assist (HDMI)] |
[ON]/[OFF] |
Images with LUT (Look-Up Table) data applied are output when you play back videos recorded with [Photo Style] set to [V-Log L]. This is linked with [LUT View Assist (HDMI)] in [V-LogL View Assist] under the [Custom] ([Monitor / Display (Video)]) menu. ([V-LogL View Assist]) |
|
[HLG View Assist (HDMI)] |
[AUTO]/[MODE1]/[MODE2]/[OFF] |
At recording or playback of HLG video, this converts their color gamut and brightness for display. This is linked with [HDMI] in [HLG View Assist] under the [Custom] ([Monitor / Display (Video)]) menu. ([HLG View Assist]) |
|
[VIERA Link (CEC)] |
[ON]/[OFF] |
You can use the device remote control to operate the camera when it is connected to a VIERA Link compatible device using an HDMI cable. |
|
[Background Color(Playback)] |
[]/[] |
Sets the color of the bands displayed on the top and bottom or the left and right of images output on an external device or similar display. We recommend setting to [] to prevent burn-in on the screen of the output destination. |
|
[Photo Luminance Level] |
[0-255]/[16-255] |
Sets the level of luminance when outputting pictures to external devices, etc. |
[Power/Network Indicator]
[ON]/[OFF] |
This will light up the status indicator and NETWORK connection lamp. |
[Setup] menu ([Setting])
[Save to Custom Mode]
[C1]/[C2]/[C3]/[C4-1] to [C4-10] |
You can register the currently set information of the camera. |
[Load Custom Mode]
[C1]/[C2]/[C3]/[C4-1] to [C4-10] |
Calls up registered Custom mode settings to the selected recording mode and overwrites the current settings with called up settings. |
[Custom Mode Settings]
[Limit No. of Custom Mode] |
[Edit Title] |
[How to Reload Custom Mode] |
[Select Loading Details] |
Sets the ease of use of Custom mode. |
[Save/Restore Camera Setting]
[Save]/[Load]/[Delete]/[Keep Settings While Format] |
Saves the camera’s settings information to the card. Saved settings information can be loaded to the camera, letting you set the same settings on multiple cameras. |
[Reset]
Returns the camera to its default settings. ([Reset]) |
[Setup] menu ([Others])
[Clock Set]
Sets the date and time. |
[Time Zone]
Sets the time zone.
(A) Current time (B) Time difference from GMT (Greenwich Mean Time) If you are using Daylight Savings [], press . (The time will move forward by 1 hour.) To return to the normal time, press again. |
[System Frequency]
[59.94Hz (NTSC)]/[50.00Hz (PAL)]/[24.00Hz (CINEMA)]
|
This changes the system frequency of videos that are recorded and played back. |
[Pixel Refresh]
This optimizes the image sensor and image processing. The image sensor and image processing are optimized when the camera is purchased. Use this function when bright spots that do not exist in the subject get recorded. Turn the camera off and on after the pixels are corrected. |
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the front of the image sensor is performed. You can use this function when the dust is particularly noticeable. Turn the camera off and on after cleaning. |
[Language]
This set the language displayed on the screen. If you set a different language by mistake, select [] from the menu icons to set the desired language. |
[Firmware Version]
[Firmware Update]/[Software info] |
You can check the firmware versions of the camera and lens. In addition, you can update the firmware, and display information about the camera software. [Firmware Update]: Updates firmware.
[Software info]: Displays information about the camera software. When a supported optional item (XLR Microphone Adaptor, etc.) is attached to the camera, you can also check its firmware version. |
[Online Manual]
[URL display]/[QR Code display] |
Displays the URL or QR code in order to browse the “Owner’s Manual <Complete Guide>”. |
[Approved Regulations]
Displays the certification number for radio regulations. |