Panasonic

Inserting Cards (Optional)

character_bullet-largeFormatting Cards (Initialization)


This camera supports the double card slot function.

When two cards are used, relay recording, backup recording, and allocation recording are available.


image_card-insert-1_qg


image_card-insert-2_qg

(A) Card slot 1

(B) Card slot 2


image_card-insert-3_qg


bullet02Match the orientation of the cards as shown in the figure and then insert them firmly until they click.


bullet02You can set the way to record to card slots 1 and 2:

[icon_setup-menu] character_arrow [icon_setup-cardfile] character_arrow [Double Card Slot Function] (character_reference[Double Card Slot Function])


character_diamondCard Access Indications

The card access light (C) turns on while the card is being accessed.

image_access-lamp


bullet02Do not perform the following operations during access.

The camera may operate incorrectly or the card and recorded images may be damaged.

– Turn off the camera.

– Remove the battery or card or disconnect the power plug.

– Subject the camera to vibration, impacts, or static electricity.


character_diamondRemoving a Card

  1. Open the card door.

  1. Push the card until it clicks and then pull the card out straight.


image_remove-card


bullet02The card may be warm just after the camera has been used.


Formatting Cards (Initialization)

Format the cards with the camera before use in order to ensure optimal card performance.


bullet02When a card is formatted, all of the data stored in the card is erased and cannot be restored.

Save a backup of necessary data before formatting the card.


button_menu-set character_arrow [icon_setup-menu] character_arrow [icon_setup-cardfile] character_arrow Select [Card Format]

Settings: [Card Slot 1]/[Card Slot 2]


bullet02Do not turn off the camera or perform another operation during formatting.

bullet02Take care not to turn off the camera while formatting is in progress.

bullet02If the card has been formatted with a PC or other device, format it again with the camera.

bullet02You can format the card while keeping the camera settings information stored on the card:

[icon_setup-menu] character_arrow [icon_setup-set] character_arrow [Save/Restore Camera Setting] character_arrow [Keep Settings While Format] (character_reference[Save/Restore Camera Setting])