[Wi-Fi Setup] Menu
This configures the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
-
Displaying the [Wi-Fi Setup] menu.
[] [] [Wi-Fi] [Wi-Fi Setup]
[Priority of Remote Device]
This sets either the camera or the smartphone as the priority control device to be used during remote recording. (Operation Method During Remote Recording)
[Wi-Fi Password]
You can use a password to connect for enhanced security. (Using Password Authentication to Connect)
[PC Connection]
You can set the workgroup.
To send images to a PC, you need to connect to the same workgroup as the destination PC.
(The default setting is “WORKGROUP”.)
To change the workgroup name, press or and enter the new workgroup name.
How to enter characters (Entering Characters)
To return to the default settings, press [DISP.].
[Device Name]
You can change the name (SSID) of the camera.
To change the SSID name, press [DISP.] and enter the new SSID name.
How to enter characters (Entering Characters)
A maximum of 32 characters can be entered.
[Wi-Fi Function Lock]
To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password.
[Setup]: Enter any 4-digit numbers as the password.
How to enter characters (Entering Characters)
[Cancel]: Cancel the password.
Once a password is set, you are required to enter it each time you use the Wi-Fi function.
If you forget your password, you can use [Reset] in the [Setup] ([Setting]) menu to reset the network settings and thereby reset the password.
[Network Address]
Displays the MAC address and IP address of the camera.