Panasonic

[Focus Transition]

icon_mode-photo_grayicon_mode-movie

icon_mode-ia_grayicon_mode-p_grayicon_mode-a_grayicon_mode-s_grayicon_mode-m_grayicon_mode-creative-motion

Smoothly transitions the focus position from the current position to a position registered in advance.


  1. Set the mode dial to [icon_mode-creative-motion_title1].

image_mode-dial-creative-video

  1. Select [Focus Transition].

character_bullet-largebutton_menu-set character_arrow [icon_movie] character_arrow [icon_video-other] character_arrow [Focus Transition]

gui_focus-transition1_eng

  1. Set the recording settings.


[Start]

Start recording.


[Focus Pull Setting]

Registers the focus position.

bullet02The setting screen for the focus position is displayed when you select either [1], [2], or [3]. Use the same procedure as MF (character_referenceRecord Using MF) to check the focus, then press button_menu-set or button_joy-stick-push_s to register the focus position.


[Focus Transition Speed]

Sets the moving speed of focus.

bullet02Moving speed: [SH] (fast) to [SL] (slow)


[Focus Transition Rec]

Starts Focus Transition when recording starts.

bullet02Select the position registered with [Focus Pull Setting].


[Focus Transition Wait]

Sets the wait time before the start of Focus Transition.


  1. Close the menu.

character_bullet-largeSelects [Start], and press button_menu-set or button_joy-stick-push_s.

character_bullet-largeThe recording screen is displayed.

bullet02To return to the setting screen, press [DISP.].

gui_focus-transition2_eng

  1. Start recording.

character_bullet-largePress the video rec. button.

bullet02If you have enabled [Focus Transition Rec], Focus Transition will start when you start recording a video.

image_motion-picture2

  1. Start Focus Transition.

character_bullet-largePress character_leftcharacter_right to select [1], [2], or [3], and then press button_menu-set or button_joy-stick-push_s.

bullet02When [Focus Transition Wait] is set, Focus Transition starts after the set time has elapsed.

gui_focus-transition

(A) Current focus position

(B) Registered focus position

  1. End Focus Transition.

character_bullet-largePress [Q].

image_q-menu-fn-button

  1. Stop recording.

character_bullet-largePress the video rec. button once again.


bullet02Maintain the same distance to the subject after setting the focus position.

bullet02The moving speed of focus varies depending on the lens being used.

bullet02While using [Focus Transition], it is not possible to focus on anything other than the registered focus position.

bullet02Any of the operations below will clear the focus position settings.

– Operating the camera on/off switch

– Zoom operation

– Switching the focus mode

– Switching the recording mode

– Replacing the lens

bullet02When the following functions are being used, [Focus Transition] is not available:

– [Variable Frame Rate]

– [Live Cropping]

bullet02[Focus Transition] cannot be used when using an interchangeable lens that does not support the focus mode [AFC].