Video Brightness and Coloring
Recording While Controlling Overexposure (Knee)
This section describes the brightness and coloring settings used during video recording.
In “7. Metering/Exposure/ISO Sensitivity” and “8. White Balance/Image Quality”, the functions described work with both pictures and video. Please also refer to those sections. |
[Luminance Level]
You can set the luminance range to suit the purpose of video recording.
You can set to [16-235] or [16-255], the standard for video, or to [0-255], which covers the entire range of luminance, the same as pictures.
[] [] Select [Luminance Level]
Settings: [0-255]/[16-235]/[16-255]
When set to a 10-bit [Rec Quality], the setting items change to [0-1023], [64-940], and [64-1023]. When [Photo Style] is set to [V-Log L], this is fixed to [0-255] ([0-1023]). When [Photo Style] is set to [Hybrid Log Gamma], this is fixed to [64-940]. |
[Master Pedestal Level]
You can adjust the black level, which serves as the reference for images.
-
Set the mode dial to [].
-
Select [Master Pedestal Level].
[] [] [Master Pedestal Level]
-
Adjust master pedestal.
Rotate , or .
Set in the range between 15 and 15.
[Master Pedestal Level] is not available when using the following function: – [V-Log L] ([Photo Style]) |
Recording While Controlling Overexposure (Knee)
When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure.
-
Set [Photo Style] to [Like709].
[] [] [Photo Style] [Like709]
-
Press [Q].
-
Select a knee setting.
Press to select a setting item.
[AUTO]
Adjusts the compression levels of high-luminance areas automatically.
[MANUAL]
You can set the luminance where compression starts (knee master point) and the intensity of compression (knee master slope).
Press to select an item and then press to adjust.
[POINT]: Master knee point
[SLOPE]: Master knee slope
Rotate to adjust the knee master point, and to adjust the knee master slope.
Values within the following ranges can be set:
– Master knee point: 80.0 to 107.0
– Master knee slope: 0 to 99
[Off]
-
Confirm your selection.
Press or .
[ISO Sensitivity (video)]
Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].
-
Set the mode dial to [].
-
Set [ISO Sensitivity (video)].
[] [] [ISO Sensitivity (video)]
Setting Items ([ISO Sensitivity (video)])
[ISO Auto Lower Limit Setting] |
Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO]. Set in the range between [200] and [6400]. |
[ISO Auto Upper Limit Setting] |
Sets the upper limit for ISO sensitivity when ISO sensitivity is [AUTO]. Set to [AUTO] or in the range between [400] and [12800]. |
When [Filter Settings] is set to [High Dynamic], [ISO Sensitivity (video)] cannot be used. |