HDMI Output Image Quality (Resolution/Frame Rate)
Settings for Down-Converting
Make settings for the down-conversion of resolution and frame rate for HDMI output in the [] mode.
[] [] [HDMI Rec Output] Select [Down Convert]
[AUTO] |
Outputs by down-converting to match the connected device. |
[4K/30p] ([4K/25p]) |
Outputs by down-converting resolution to 4K and frame rate to either 29.97p or 25.00p. |
[1080p] |
Down-converts resolution to FHD (1080), and outputs as progressive. |
[1080i] |
Down-converts resolution to FHD (1080), and outputs as interlaced. |
[OFF] |
Outputs at the resolution and recording frame rate of the [Rec Quality]. |
The items you can select depend on the [System Frequency] setting. 6K/4K Anamorphic (4:3) video is output with a 4K or FHD resolution. If down-converting, AF may take longer than usual for focusing, and the performance of continuous focus tracking may deteriorate. |
Image Quality When Outputting via HDMI
Output is with the resolution and frame rate according to the combinations of the [Rec Quality] and [Down Convert] settings.
When [Down Convert] is set to [AUTO], the output matches the connected device.
There is no HDMI output when setting combinations result in a [—] in the below tables.
[System Frequency]: [59.94Hz (NTSC)]
-
Output is 1080/59.94p if the connected device is not compatible.
[System Frequency]: [50.00Hz (PAL)]
-
Output is 1080/50.00p if the connected device is not compatible.
[System Frequency]: [24.00Hz (CINEMA)]