[Standard] / [Vivid] / [Natural] / [L.ClassicNeo] / [Flat] / [Landscape] / [Portrait] / [Monochrome] / [L.Monochrome] / [L.Monochrome D] / [L.Monochrome S] / [Cinelike D2] / [Cinelike V2] / [Like709] / [V-Log L] / [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10]

You can select the finishing settings of images to suit your subjects and expression styles.

([Photo Style])

[]/[]/[]/[]

Type of optical measurement to measure brightness can be changed.

([Metering Mode])

[4:3]/[3:2]/[16:9]/[1:1]

You can select the image aspect ratio.

([Aspect Ratio])

[FINE]/[STD.]/[RAWFINE]/[RAWSTD.]/[RAW]

Set the compression rate used for storing pictures.

([Picture Quality])

[L]/[M]/[S]

Sets the picture’s image size.

([Picture Size])

[ON]/[OFF]

The camera automatically removes noise generated when recording images with a slow shutter speed.

Recording is not possible during noise reduction.

When the following functions are being used, [Long Exposure NR] is not available:

– Video recording/[6K/4K PHOTO]/[Post-Focus]

– [ELEC.] (Excluding [ELEC.+NR])/[Silent Mode]

[ISO Auto Lower Limit Setting]

[200] to [12800]

[ISO Auto Upper Limit Setting]

[AUTO]/[400] to [25600]

Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].

[AUTO]/[1/16000] to [1/1]

Sets the minimum shutter speed when the ISO sensitivity is set to [AUTO].

The shutter speed may become slower than the set value in recording situations where correct exposure cannot be achieved.

[AUTO]/[HIGH]/[STANDARD]/[LOW]/[OFF]

Contrast and exposure are compensated when the brightness difference between the background and subject is great.

Compensation effect may not be achieved depending on the recording conditions.

When the following functions are being used, [i.Dynamic Range] is not available:

– [Like709]/[V-Log L]/[Hybrid Log Gamma] ([Photo Style])

– [Filter Settings]

[ON]/[OFF]

When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected.

Compensation effect may not be achieved depending on the recording conditions.

Noise in the periphery of the picture may stand out with higher ISO sensitivity.

When the following function is being used, [Vignetting Comp.] is not available:

– [Ex. Tele Conv.]

– [PIXEL/PIXEL] ([Image Area of Video])

– [Variable Frame Rate]

[AUTO]/[OFF]

The camera raises the image resolution by correcting the blurriness caused by diffraction when the aperture is closed.

Compensation effect may not be achieved depending on the recording conditions.

Noise may stand out with higher ISO sensitivity.

[Filter Effect]

[ON]/[OFF]/[SET]

[Simultaneous Record w/o Filter]

[ON]/[OFF]

This mode records with additional image effects (filters).

([Filter Settings])

[Set 1]/[Set 2]/[Set 3]/[Set 4]

Select features of AF operation when recording using [AFC] that are appropriate for the subject and scene.

([AF Custom Setting(Photo)])

[ON]/[OFF]

When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus.

The effective range of the AF assist light is different depending on the lens used.

– When the interchangeable lens (H-ES12060) is attached and at wide-angle end.

Approx. 1.0 m (3.3 feet) to 3.5 m (11 feet)

– When the interchangeable lens (H-FS12060) is attached and at wide-angle end.

Approx. 1.0 m (3.3 feet) to 3.0 m (9.8 feet)

Remove the lens hood.

The AF assist light may be greatly blocked, and it may become harder to focus when a lens with large diameter is used.

[ON]/[OFF]

[SET]

[Focus Peaking Sensitivity]

[Display Color]

[Display During AFS]

During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color.

If the [Focus Peaking Sensitivity] is adjusted to the negative direction, portions to be highlighted are reduced, allowing you to achieve a more precise focus.

With [Display Color], you can set the display color of the in-focus portion.

When [Display During AFS] is set to [ON], the Focus Peaking display is also possible when the shutter button is pressed halfway in the [AFS] focus mode.

You can display the Touch Tab ([Touch Settings]) and then touch [] in [] to switch [ON]/[OFF].

When [Rough Monochrome] of [Filter Settings] is being used, [Focus Peaking] is not available.

When [Live View Boost] is being used, [Focus Peaking] is not available.

[FAST]/[NORMAL]

Sets the speed when moving a single AF area.

[]/[]/[]/[]/[]

Sets the flash mode.

([Flash Mode])

[TTL]/[MANUAL]

You can select whether to set the flash output automatically or manually.

([Firing Mode]/[Manual Flash Adjust.])

[3 EV] to [3 EV] ([0 EV])

When [Firing Mode] is set to [TTL], you can adjust the flash output.

([Flash Adjust.])

[1ST]/[2ND]

Sets the flash mode to Second Curtain Synchro.

([Flash Synchro])

[1/128] to [1/1]

When [Firing Mode] is set to [MANUAL], you can set the flash output.

([Firing Mode]/[Manual Flash Adjust.])

[ON]/[OFF]

Automatically adjust the flash output in conjunction with the exposure compensation value.

([Auto Exposure Comp.])

[ON]/[OFF]

Enables recording using a wireless flash.

(Recording Using a Wireless Flash)

[1CH]/[2CH]/[3CH]/[4CH]

Sets the channel to use when recording with a wireless flash.

(Recording Using a Wireless Flash)

[ON]/[OFF]

Uses FP firing for an external flash when recording with a wireless flash.

([Wireless FP])

[HIGH]/[STANDARD]/[LOW]

Set the strength of communication light.

([Communication Light])

[External Flash]

[Firing Mode]/[Flash Adjust.]/[Manual Flash Adjust.]

[A Group]/[B Group]/[C Group]

[Firing Mode]/[Flash Adjust.]/[Manual Flash Adjust.]

Sets details for wireless flash recording.

(Setting Items ([Wireless Setup]))

[Bracketing Type]

[]/[]/[]/[]/[]/[OFF]

[More Settings]

You can take multiple pictures while automatically adjusting a setting.

(Bracket Recording)

[ON]/[OFF]

Disables all operation sounds and light output at once.

([Silent Mode])

[Operation Mode]

[]/[]/[]/[OFF]

[E-Stabilization (Video)]

[ON]/[OFF]

[Boost I.S. (Video)]

[ON]/[OFF]

[Anamorphic (Video)]

[]/[]/[]/[]/[]/[OFF]

[Lens Information]

[Lens1] to [Lens12] ([Lens1])

Configures image stabilizer settings.

(Image Stabilizer)

[H]/[M]/[L]

Sets the burst recording operation.

(Taking Burst Pictures)

[AUTO]/[MECH.]/[EFC]/[ELEC.]/[ELEC.+NR]

Selects the shutter type to use for taking pictures.

([Shutter Type])

[8SEC]/[4SEC]/[2SEC]/[1SEC]/[OFF]

To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has passed since the shutter button was pressed.

When the following functions are being used, [Shutter Delay] is not available:

– Video recording/[6K/4K PHOTO]/[Post-Focus]

[ZOOM]/[TELE CONV.]/[OFF]

You can take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality.

(Extended Tele Conversion)

[Mode]

[Time Lapse Shot]

[Stop Motion Animation]

Time Lapse Shot automatically starts/stops recording at a set recording interval.

Stop Motion Animation enables you to take pictures while moving the subject little by little.

(Recording with Time Lapse Shot, Recording with Stop Motion Animation)

[]/[]/[]/[] etc. (Custom)

[SET]

[Custom Time]

[Display Countdown]

Sets the self-timer duration.

(Recording Using the Self-timer)

[Picture Size / Burst Speed]

[6K 18M]/[4K H 8M]/[4K 8M]

[Rec Method]

[6K/4K Burst]/[6K/4K Burst(S/S)]/[6K/4K Pre-Burst]

[Pre-Burst Recording]

[ON]/[OFF]

Sets 6K/4K photos.

You can save pictures extracted from a burst file taken using high-speed burst.

(6K/4K Photo Recording)

[6K 18M]/[4K 8M]

Taking burst pictures with the same image quality as 6K/4K photos while automatically changing the focus point.

You can select the focus point for the picture to save after recording.

(Post-Focus Recording)

[Start]

[Auto Gain]

[ON]/[OFF]

[Overlay]

[ON]/[OFF]

You can apply an effect equivalent to four exposures on a single image.

[Start]: Starts exposure for multiple exposures.

[Auto Gain]: Automatically adjusts brightness in accordance with image count.

[Overlay]: Allows multiple exposure for recorded RAW images. After selecting [Start], a selection screen for images to stack is displayed.

After selecting [Start], pressing the shutter button fully starts multiple exposure.

Preview is displayed for each recording, and the following operations are available:

– [Next] (You can also perform the same operation by pressing the shutter button halfway.)

– [Retake]

– [Exit]: Records the picture, and finishes multiple exposure recording.

To finish multiple exposure recording before starting the recording, press [Q] on the recording screen.

Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures.

[Overlay] can be set only for RAW images recorded with the camera.

When the following functions are being used, [Multiple Exposure] is not available:

– [Time Lapse Shot]

– [Stop Motion Animation]

– [Filter Settings]

– HDMI output

[ON]/[OFF]

Records the recorded date and time superimposed on the images.

You cannot delete recording dates after superimposing them.

The recorded date and time are not recorded in 6K/4K burst files or RAW images.

When the following functions are being used, [Time Stamp Rec.] is not available:

– [Post-Focus]

– 6K/4K Anamorphic (4:3) video

– [Variable Frame Rate]