Record Using MF
MF (Manual Focus) refers to manual focusing.
Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF.
-
Set the focus mode lever to [MF].
-
Select the focus point.
Tilt the joystick to select the focus point.
To return the point to be brought into focus to the center, press [DISP.].
-
Confirm your selection.
Press
.
This switches to the MF Assist screen, and shows an enlarged display.
-
Adjust the focus.
The operations used to focus differ depending on the lens.
When using an interchangeable lens with a focus ring
Rotate to (A) side:
Focuses on nearby subject
Rotate to (B) side:
Focuses on distant subjects
When using the interchangeable lens having a focus lever
Move to (C) side:
Focuses on nearby subject
Move to (D) side:
Focuses on distant subjects
The focusing speed varies depending on how far you move the focus lever.
When using an interchangeable lens with no focus ring
Press : Focuses on nearby subject
Press : Focuses on distant subjects
Pressing and holding
/
will increase the focus speed.
Focus can also be adjusted by dragging the slide bar.
This will display the in-focus portion highlighted with color. (Focus Peaking)
A recording distance guideline is displayed. (MF Guide)
(E) MF Assist (enlarged screen)
(F) Focus Peaking
(G) MF Guide
-
Close the MF Assist screen.
Press the shutter button halfway.
This operation can also be performed by pressing
.
-
Start recording.
Press the shutter button fully.
Operations on the MF Assist Screen
-
When using an interchangeable lens with no focus ring, you can perform these operations after pressing
to display the screen that lets you set the area to be enlarged.
When the picture is displayed in windowed mode, you can enlarge the picture by approx. 3
to 6
; when the picture is displayed in full screen, you can enlarge the picture by approx. 3
to 20
.
|
[
[
[
[
[
[
[
[ |