Camera Setting Operations

When changing the camera settings, operate the camera using the following operation parts.

image_basic-operation

(A) Front dial

(B) Rear dial

(D) [MENU/SET] button

(E) Cursor buttons

(F) Joystick

(G) Touch screen

character_diamond Front Dial/Rear Dial

image_front-dial

image_rear-dial

Rotate:

Selects an item or numeric value.

character_diamond Control Dial

image_control-dial

Rotate:

Selects an item or numeric value.

character_diamond Cursor Buttons

Press:

Selects an item or numeric value.

character_diamond [MENU/SET] Button

Press:

Confirms a setting.

Displays the menu during recording and playback.

character_diamond Joystick

The joystick can be operated in 4 directions by tilting it up, down, left and right and by pressing the center part.

image_joystick

(A) Tilt: Selects an item or numeric value, or moves a position.

Place your finger on the center of the joystick before tilting. The joystick may not work as expected when the sides are pressed.

(B) Press: Confirms a setting.

You can register [Operation Lock] to the Fn button to disable the operations of operating parts:

[] [] [Fn Button Set] [Setting in REC mode] [Operation Lock] ( character_reference Fn Buttons)

character_diamond Touch Screen

Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen.

image_touch

(A) Touch

Operation of touching and then lifting your finger from the touch screen.

(B) Drag

Operation of moving a finger while it touches the touch screen.

Operations of widening the distance between two fingers (pinch out) and narrowing the distance between two fingers (pinch in) while they are touching the touch screen.

If you will use a commercially available monitor protection sheet, observe the precautions for the sheet.

(Visibility and operability may be impaired depending on the type of monitor protection sheet.)

Touch operations can be disabled:

[] [] [Touch Settings] ( character_reference [Touch Settings])