Panasonic

Importing Images to a PC

character_bullet-largeInstalling Software


After connecting to the PC, you can copy the recorded images by dragging files and folders on this camera to the PC.


bullet02The camera can be connected to a PC running any of the following OSs which can detect mass storage devices.

Supported OS

Windows: Windows 10

Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.2


Getting started:

bullet02Turn on the camera and PC.


  1. Connect the camera and PC with the USB connection cable. (character_referenceUSB port)

  1. Press character_upcharacter_down to select [PC(Storage)] and then press button_menu-set or button_joy-stick-push_s.

character_bullet-largeWindows: A drive (“LUMIX”) is displayed in [This PC].

character_bullet-largeMac: A drive (“LUMIX”) is displayed on the desktop.

  1. Drag the files and folders from the camera to the PC.


bullet02You can use software to perform operations such as organizing and correcting recorded images, processing RAW images, and editing videos. (character_referenceInstalling Software)

bullet02Supported by “Final Cut Pro X”.

For details on “Final Cut Pro X”, please contact Apple Inc.


character_diamondFolder Structure Inside Card

image_folder

(A) The camera’s setup information

(B) Streaming Settings

(C) Images

(D) Folder number

(E) JPG: JPEG format pictures

RW2: RAW format pictures

MP4: MP4 videos, 6K/4K burst files

MOV: MOV videos

(F) File number

(G) Color space

P: sRGB

_: AdobeRGB


bullet02If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the PC without the [USB Mode] selection screen being displayed. (character_reference[USB])

bullet02Take care not to turn off the camera while images are being imported.

bullet02After importing of the images is completed, perform the operation to safely remove the USB connection cable on the PC.

bullet02Turn off the camera and disconnect the USB connection cable before removing the card from the camera. Otherwise, the recorded data may be damaged.


Installing Software

Install the software to perform operations such as organizing and correcting recorded images, processing RAW images, and editing videos.


bullet02To download the software, your PC needs to be able to connect to the internet.

bullet02Supported OSs are current as of May 2021 and are subject to change.


character_diamondSILKYPIX Developer Studio SE

This software processes and edits RAW images.

Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC.


Check the following site and then download and install the software:

http://www.isl.co.jp/SILKYPIX/english/p/


Operating environment

character_bullet-largeSupported OS

Windows: Windows 10, Windows 8.1 (64-bit recommended)

Mac: macOS 10.13 to macOS 10.15, macOS 11


bullet02For more information such as how to use “SILKYPIX Developer Studio”, refer to the Help or the Ichikawa Soft Laboratory’s support site.


character_diamond30-Day Full Trial Version of “LoiLoScope”

This software allows you to easily edit videos.


Check the following site and then download and install the software:

http://loilo.tv/product/20


Operating environment

character_bullet-largeSupported OS

Windows: Windows 10, Windows 8.1, Windows 8


bullet02You can download a trial version that can be used for free for 30 days.

bullet02For more information on how to use “LoiLoScope”, refer to the “LoiLoScope” manual available for download at the site.

bullet02“LoiLoScope” is not available for Mac.