Panasonic

[Playback] Menu

character_bullet-largeHow to Select an Image(s) in the [Playback] menu

character_bullet-large[Playback] menu ([Playback Mode])

character_bullet-large[Playback] menu ([Process Image])

character_bullet-large[Playback] menu ([Add/Delete Info.])

character_bullet-large[Playback] menu ([Edit Image])

character_bullet-large[Playback] menu ([Others])


How to Select an Image(s) in the [Playback] menu

Follow the steps below when the image selection screen is displayed.

bullet02Images are displayed separately by card slot.

To switch the card to display, press [button_af-mode_s] and select the card slot.

bullet02You can only select/edit images on one card at a time.


character_diamondWhen [Single] has been selected

  1. Press character_leftcharacter_right to select the image.

gui_title-edit2_eng

  1. Press button_menu-set or button_joy-stick-push_s.

bullet02If [Set/Cancel] is displayed at the right bottom of the screen, the setting is canceled when button_menu-set or button_joy-stick-push_s is pressed again.


character_diamondWhen [Multi] has been selected

  1. Press character_upcharacter_downcharacter_leftcharacter_right to select the image and then press button_menu-set or button_joy-stick-push_s (repeat).

bullet02The setting is canceled when button_menu-set or button_joy-stick-push_s is pressed again.

  1. Press [DISP.] to execute.

gui_title-edit3_eng


When [Protect] is selected

  1. Press character_upcharacter_downcharacter_leftcharacter_right to select the image, and then press button_menu-set or button_joy-stick-push_s to set (repeat).

bullet02The setting is canceled when button_menu-set or button_joy-stick-push_s is pressed again.

gui_favorite3_eng


[Playback] menu ([Playback Mode])

character_default: Default settings


[Playback Mode]

character_default[Normal Play]/[Picture Only]/[Video Only]/[Rating]/[6K/4K PHOTO]/[Post-Focus]

Filters the type of images to play back.

bullet02When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.].


[Slide Show]

[All]/[Picture Only]/[Video Only]/[Rating]/[6K/4K PHOTO]/[Post-Focus]

Selects image types and plays them back at regular intervals in order.

bullet02When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.].

[Start]: Starts slide show playback.

[Duration]: Sets repeat playback.

[Repeat]: Sets repeat playback.


Operations during slide show

character_up: Plays/pauses (You can also perform the same operation by touching [icon_play-picture_s] or [icon_pause-picture_s])

character_left: Move to the previous image

character_right: Move to the next image

character_down: Ends the slide show

button_control-dial_s: Adjusts the volume (You can also perform the same operation by touching [icon_volume-low_s] or [icon_volume-high_s])

bullet02When [Video Only] is set, [Duration] is not available.


[Rotate Disp.]

character_default[ON]/[OFF]

Automatically displays pictures vertically if they were recorded when holding the camera vertically.


[Picture Sort]

[FILE NAME]/character_default[DATE/TIME]

This sets the order in which the camera displays images during playback.

[FILE NAME]: Displays images by folder name/file name.

[DATE/TIME]: Displays images by recording date.

bullet02If you insert another card, it may take some time to read all data, therefore pictures may not be displayed in the set order.


[Magnify from AF Point]

[ON]/character_default[OFF]

Displays the point focused with AF.

Enlarges the AF focus location when enlarging the image.


[LUT View Assist (Monitor)]

[ON]/character_default[OFF]

When playing back video recorded with [Photo Style] set to [V-Log L], this displays the images with LUT data applied on the monitor/viewfinder.


bullet02This functions in tandem with [LUT View Assist (Monitor)] in [V-LogL View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. (character_reference[LUT View Assist (Monitor)])


[HLG View Assist (Monitor)]

[MODE1]/character_default[MODE2]/[OFF]

At recording or playback of HLG video, this converts their color gamut and brightness for display.

bullet02This functions in tandem with [Monitor] in [HLG View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. (character_reference[HLG View Assist])


[Anamorphic Desqueeze Display]


[icon_anamo-desqueeze-20]/[icon_anamo-desqueeze-18]/[icon_anamo-desqueeze-15]/[icon_anamo-desqueeze-133]/[icon_anamo-desqueeze-130]/character_default[OFF]

This displays the de-squeezed images suited to the magnification of the anamorphic lens on this camera. (character_reference[Anamorphic Desqueeze Display])

bullet02This is linked with [Anamorphic Desqueeze Display] under the [Custom] ([Monitor / Display (Video)]) menu.


[Playback] menu ([Process Image])

character_default: Default settings


[RAW Processing]

Processes pictures taken in RAW format on the camera and saves them in JPEG format.

(character_reference[RAW Processing])


[6K/4K PHOTO Bulk Saving]

You can save any 5 second period of pictures from a 6K/4K burst file all at once.

(character_reference[6K/4K PHOTO Bulk Saving])


[6K/4K PHOTO Noise Reduction]

character_default[AUTO]/[OFF]

When saving pictures, reduce the noise that occurs due to high ISO sensitivity.

(character_referenceReducing Noise Caused by High Sensitivity ([6K/4K PHOTO Noise Reduction]))


[Time Lapse Video]

This creates videos from group images recorded with [Time Lapse Shot]. (character_referenceTime Lapse Shot/Stop Motion Animation Videos)

  1. Press character_leftcharacter_right to select a [Time Lapse Shot] group and then press button_menu-set or button_joy-stick-push_s.

  1. Select the options for creating a video to combine the pictures into a video.

bullet02When [System Frequency] is set to [24.00Hz (CINEMA)], [Time Lapse Video] is not available.


[Stop Motion Video]

This creates videos from group images recorded with [Stop Motion Animation]. (character_referenceTime Lapse Shot/Stop Motion Animation Videos)

  1. Press character_leftcharacter_right to select the Stop Motion Animation group and then press button_menu-set or button_joy-stick-push_s.

  1. Select the options for creating a video to combine the pictures into a video.

bullet02When [System Frequency] is set to [24.00Hz (CINEMA)], [Stop Motion Video] is not available.


[Playback] menu ([Add/Delete Info.])

[Protect]

[Single]/[Multi]/[Cancel]

You can set protection for images so that they will not be deleted by mistake.

However, if you format the card, the protected images will also be deleted.

bullet02For information about how to select images (character_referenceHow to Select an Image(s) in the [Playback] menu)

bullet02Be careful because the [Protect] setting may be disabled on a device other than this camera.


[Rating]

[Single]/[Multi]/[Cancel]

If you set any of the five different rating levels for images, you can do the following:

bullet02Deleting all images except for those with ratings.

bullet02Play back or show a slide show of images by the rating level.

bullet02Check the rating level in the file details display in operating systems such as Windows 10, Windows 8.1, and Windows 8. (JPEG images only)

  1. Select an image. (character_referenceHow to Select an Image(s) in the [Playback] menu)

  1. Press character_leftcharacter_right to select a rating level (1 to 5) and then press button_menu-set or button_joy-stick-push_s.

bullet02When [Multi] is selected, repeat Steps 1 and 2.

bullet02To cancel the setting, set the rating level to [OFF].


[Playback] menu ([Edit Image])

character_default: Default settings


[Resize]

[Single]/[Multi]

Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments.

bullet02For information about how to select images (character_referenceHow to Select an Image(s) in the [Playback] menu)

– When [Single] is selected, after choosing the image, press character_upcharacter_down to select the size, then press button_menu-set or button_joy-stick-push_s.

– When [Multi] is selected, before choosing the images, press character_upcharacter_down to select the size, then press button_menu-set or button_joy-stick-push_s.

bullet02You can set up to 100 images at once with [Multi].

bullet02The image quality of the resized image becomes lower.

bullet02[Resize] is not available for images recorded using the following functions:

– Video recording/[6K/4K PHOTO]/[Post-Focus]

– Group images

– [RAW] ([Picture Quality])

– Pictures created from [C4K] video


[Rotate]

Rotate images manually in 90character_degree steps.

[icon_rotate1]: Rotates 90character_degree clockwise.

[icon_rotate2]: Rotates 90character_degree counter-clockwise.


[Video Divide]

Divide a recorded video or 6K/4K burst file into two.

(character_reference[Video Divide])


[Copy]

[Copy Direction]

character_default[icon_copy-direct1]/[icon_copy-direct2]

[Select Copy]/[Copy All in Folder]/[Copy All in Card]

You can copy the images in one of the cards to the other card.

bullet02Copied images will be saved in a new folder.

[Select Copy]: Copies selected images.

  1. Select the folder containing the images to copy.

  1. Select the images. (character_referenceHow to Select an Image(s) in the [Playback] menu)

[Copy All in Folder]: Copies all images in a folder.

  1. Select the folder to copy.

  1. Check the images to be copied and then press button_menu-set or button_joy-stick-push_s to execute copying.

[Copy All in Card]: Copies all images in the card.


Using the Fn button to copy images

If you press the Fn button with [Copy] assigned while playing back one image at a time, the image currently being played back will be copied to the other card.

Select the copy destination folder from the following options. In the case of group images, [Create a New Folder] is selected automatically.

[Same Folder Number as Source]: Copies to a folder with the same name as the folder of the image to be copied.

[Create a New Folder]: Creates a new folder with an incremented folder number and then copies the image to it.

[Select Folder]: Selects a folder to store the image and then copies the image to it.


bullet02You can set up to 100 images at once with [Select Copy].

bullet02The [Protect] setting is not copied.

bullet02Copying may take a while.

bullet02When using the following combinations of cards, videos, 6K/4K photos, and images recorded with [Post-Focus] cannot be copied:

– Copying from an SDXC memory card to an SD memory card or SDHC memory card


[Playback] menu ([Others])

character_default: Default settings


[Delete Confirmation]

["Yes" first]/character_default["No" first]

This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting an image is displayed.

["Yes" first]: [Yes] is highlighted first.

["No" first]: [No] is highlighted first.


[Delete All Images]

[Card Slot 1]/[Card Slot 2]

Deletes all images in a card.

bullet02Images cannot be restored once they have been deleted. Carefully confirm the images before deletion.

bullet02If you select [Delete All Non-rating], all images except those with a rating set are deleted.

bullet02[Delete All Images] can be used when [Playback Mode] is set to [Normal Play].