Streaming Settings

icon_mode-photo_gray icon_mode-movie

icon_mode-ia_gray icon_mode-p_gray icon_mode-a_gray icon_mode-s_gray icon_mode-m_gray icon_mode-creative-motion

Configures streaming settings.

button_menu-set [] [ icon_setup-inout ] [Wi-Fi] Select [Streaming Setup]

[Streaming Function]	[ON]: Performs Wi-Fi connection and gets into a state where streaming can start. [OFF]: Ends the Wi-Fi connection for performing streaming.
[Streaming Quality]	Sets the image quality that will be streamed. ([Streaming Quality])
[Streaming Address]	Displays the current streaming destination address. To change the streaming destination, press [DISP.] first then input the streaming destination address. For information on how to enter characters (Entering Characters)
[Save/Load Streaming Address]	[Save]	Saves the current streaming destination address to the card. If saving new data, then select [New File], and if overwriting an existing file, select that existing file. When [New File] is selected, a screen to select the file name to save as is displayed. [OK]: Saves using the file name on the screen. [Change the file name]: Changes the file name and saves the file. Available characters: alphabetic characters (uppercase), numerals, up to 8 characters For information on how to enter characters (Entering Characters)
	[Load]	Copy the streaming destination address in the card to the camera. If you set a password when you saved the streaming destination address on the card, the password entry screen is displayed.
	[Delete]	Deletes the streaming destination address within the card.
	[Keep Settings While Format]	When formatting the card, you can keep the streaming destination address saved in the card and format.
	[Password]	Displays the password input screen when [Save] is selected.
[Wi-Fi Connection Setting]	Sets the wireless access point the camera connects to when streaming. ([Via Network])

Up to 10 streaming destination addresses can be saved onto one card.

Set [Wi-Fi Connection Setting] before setting [Streaming Function] to [ON].

If you forget the password, save the streaming destination address again with a new password.

character_diamond [Streaming Quality]

Video compression format: H.264/MPEG-4 AVC

[System Frequency]: [59.94Hz (NTSC)]

[Streaming Quality]	Resolution	Frame rate	Bit rate
FHD/16M/60p	19201080	59.94p	16 Mbps
FHD/8M/60p		59.94p	8 Mbps
FHD/6M/30p		29.97p	6 Mbps
FHD/3M/30p		29.97p	3 Mbps
HD/6M/60p	1280720	59.94p	6 Mbps
HD/4M/30p	1280720	29.97p	4 Mbps

[System Frequency]: [50.00Hz (PAL)]

[Streaming Quality]	Resolution	Frame rate	Bit rate
FHD/16M/50p	19201080	50.00p	16 Mbps
FHD/8M/50p		50.00p	8 Mbps
FHD/6M/25p		25.00p	6 Mbps
FHD/3M/25p		25.00p	3 Mbps
HD/6M/50p	1280720	50.00p	6 Mbps
HD/4M/25p	1280720	25.00p	4 Mbps

If the streaming destination is an RTMPS, an image quality with a bit rate of 16 Mbps or above cannot be set.

The image output via HDMI is output with the resolution and frame rate according to the combinations of the [Streaming Quality] and [Down Convert] settings.

– When [Streaming Quality] is set to [HD], the output is in [FHD] resolution.

Notes When Using the Streaming Function

Operation is as follows when using the streaming function:

The following functions are not available:

– [Hybrid Log Gamma] ([Photo Style])

– [Miniature Effect] ([Filter Settings])

– [Rec. File Format]

– [Rec Quality]

– [Rec Quality (My List)]

– [Variable Frame Rate]

– [96kHz/24bit], [48kHz/24bit] ([XLR Mic Adaptor Setting])

– [Loop Recording (video)]

– [Segmented File Recording]

– [Live Cropping]

– [Wi-Fi Function] (Wi-Fi connection destination during streaming can be set in [Streaming Setup].)

– Pairing function of [Bluetooth]

The streaming function is not available when using the following functions:

– When [System Frequency] is set to [24.00Hz (CINEMA)]

– During USB connection (Excludes when supplying power using a USB connection cable)

Displays a blue frame on the screen during streaming:

[] [ icon_video-display-output ] [Streaming Blue Frame Indicator] ( character_reference [Streaming Blue Frame Indicator])

When you press the video rec. button, the images being streamed will be recorded on the external recorder output via HDMI:

[] [ icon_setup-inout ] [HDMI Rec Output] [HDMI Recording Control]

If you turn the camera off without ending the streaming function, when the next time the camera is turned on, it is automatically reconnected to the connection destination that was previously connected.

Video cannot be recorded to the cards while using streaming function.

The menu screen cannot be displayed while streaming.

The camera’s recording information will not be displayed on the streamed images.

The required conditions for streaming differ depending on the video sharing website. Check the video sharing website for details.