Playing Back Videos

Display the playback screen.

Press [ button_playback ].

button_play-back

Select a video.

For information about how to select images ( character_reference Playing Back Pictures)

The [ icon_movie-avchd ] video icon is displayed for a video.

The video recording time is displayed on the screen.

Example) When 8 minutes 30 seconds: 8m30s

h: hour, m: minute, s: second

gui_play-motion-picture

(A) Video recording time

Play back the video.

Press character_up .

You can also start playback by touching [ icon_play-picture_s ] at the center of the screen.

gui_create-motion-picture1

(B) Elapsed playback time

Stop playback.

Press character_down .

character_diamond Operations During Video Playback

Button operations	Touch operations	Description of operation
	/	Plays/pauses.
	—	Stops.
	—	Performs fast-rewind playback. If you press again, the fast-rewind speed increases.
	—	Performs frame-by-frame rewinding (while paused).
	—	Performs fast-forward playback. If you press again, the fast-forward speed increases.
	—	Performs frame-by-frame forwarding (while paused).
—		Selects the frame to display.
/		Extracts a picture (while paused). (Extracting a Picture)
	—	Reduces the volume.
	—	Increases the volume.

icon_info_s

The camera can play back videos in MP4, MOV, and Apple ProRes formats.

Video recorded with a [System Frequency] setting that is different to the current one cannot be played back.

If the reading speed of the card is slow, playback may pause or it may not be possible to play back smoothly.

icon_related-info_s

You may be able to repair video files that cannot be played back.

( character_reference [Video Repair])

You can set the operation for when playback of video finishes:

( character_reference [Behavior After Video Playback])

You can assign switching of the recording screen/playback screen to an Fn button:

( character_reference [Rec / Playback Switch], [Rec / Playback Switch])

Video Repeat Playback

You can play back a part of a video repeatedly.

Display the screen for setting the part to repeat.

Press [Q] while paused.

The screen for setting the part to repeat is also displayed when you touch [Repeat Playback] while paused.

Set the position to start the repeat.

Press character_left character_right to select the start position and then press button_menu-set or button_joy-stick-push_s .

Selection is also possible by rotating image_front-dial_s , image_rear-dial_s or button_control-dial_s .

You can also select the start position by touching the playback bar.

Set the position to end the repeat.

Set using the same procedure as 2.

The position cannot be set if the position to start the repeat and the position to end the repeat are too close.

gui_repeat-motion-picture

Start playback.

The operations during repeat playback are the same as “Operations During Video Playback”. ( character_reference Operations During Video Playback)

End repeat playback by pressing character_down to stop playback or by pressing [Q] while paused.

icon_info_s

Repeat playback is not possible if the recording time is short.

The positions set for the repeated part may shift from the position where the video is paused.

Extracting a Picture

Extract one frame of a video and save it as a JPEG image.

Pause playback at the position you wish to extract a picture.

Press character_up .

To fine-adjust the position, press character_left character_right (rewind frame-by-frame or forward frame-by-frame).

gui_create-motion-picture2

Save the picture.

Press button_menu-set or button_joy-stick-push_s .

You can also save the picture by touching [Save].

icon_info_s

The picture created from the video is saved with a [FINE] picture quality.

The picture is saved with a size according to the resolution of the [Rec Quality].

The image quality of a picture created from a video may be coarser than normal.

[ icon_video-to-picture ] is displayed on the detailed information display screen for a picture created from a video.

[Video Divide]

Divide a recorded video into two.

icon_care_s

Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation.

Do not remove the card or battery from the camera during the divide process. The images may be lost.

Select [Video Divide].

button_menu-set [ icon_playback ] [ icon_playback-edit-image ] [Video Divide]

Select and play the image.

Press character_left character_right to select an image and then press button_menu-set or button_joy-stick-push_s .

Pause playback at the position you wish to divide.

Press character_up .

To fine-adjust the position, press character_left character_right (frame-by-frame rewind or frame-by-frame forward).

gui_video-divide2

Divide the video.

Press button_menu-set or button_joy-stick-push_s .

You can also divide the video by touching [Divide].

icon_info_s

It is not possible to divide video that was recorded when [Rec. File Format] was [Apple ProRes].

Dividing the video at a point close to the start or end may not be possible.

Videos with a short recording time cannot be divided.

[Video Divide] cannot be used on images recorded using [Segmented File Recording].