Panasonic

Log Recording

character_bullet-large[V-Log View Assist]


icon_mode-photoicon_mode-movie

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motionicon_mode-slow-and-quick-motion

Setting [Photo Style] to [V-Log] enables Log recording.

Images finished with rich gradation can be created through post-production processing.


button_menu-set character_arrow [icon_movie] character_arrow [icon_photo-quality] character_arrow [Photo Style] character_arrow Select [V-Log]

gui_video-photo-style-v-log_eng


icon_hints_s

bullet02Post-production processing is enabled by utilizing LUT (Look-Up Table).

You can download LUT file from the following support site:

https://panasonic.jp/support/global/cs/dsc/download/index3.html

(English only)


character_diamondISO Sensitivity When [V-Log] Is Set

ISO sensitivity can be set in the range between [500] and [12800] (sensor output 60 fps or lower) or between [250] and [3200] (sensor output 61 fps or higher). You can set between [125] and [12800] when [Extended ISO] is set.


character_diamondExposure When [V-Log] Is Set

The [V-Log] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the standard exposure when gray with a reflectance ratio of 18 % is imaged is IRE 42 %.


image_v-log-character


When [Photo Style] is set to [V-Log]

Reflectance ratio (%)

IRE (%)

Stop

10 bit code value

12 bit code value


0

7.3

—

128

512

(1)

18

42

0.0

433

1732

(2)

90

61

2.3

602

2408

bullet02When luminance is to be displayed by “Stop” units, this camera calculates IRE 42 % to “0 Stop”.


icon_related-info_s

bullet02Luminance can be checked by “Stop” units:

(character_reference[Luminance Spot Meter], [Zebra Pattern])


[V-Log View Assist]

When [Photo Style] is set to [V-Log], the recording screen and images output via HDMI will darken. Using [V-Log View Assist] means you can show images with LUT file applied on the monitor/viewfinder and output them via HDMI.


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_video-display-output] character_arrow Select [V-Log View Assist]


[LUT Select]

Selects the LUT file to apply from a preset ([Vlog_709]) or LUT files registered in [LUT Library]. (character_reference[LUT Library])


[LUT View Assist (Monitor)]

Displays the images with LUT file applied on the monitor/viewfinder of the camera.


[LUT View Assist (HDMI)]

Applies LUT file to images output over HDMI.



icon_info_s

bullet02When applying the LUT file, [LUT] is displayed on the recording screen.

bullet02[LUT View Assist (Monitor)]/[LUT View Assist (HDMI)] are not available when [LUT] is applied in the [Photo Style] image quality adjustments.