HDMI Output Image Quality
Images Output via HDMI
The images output via HDMI during recording differ depending on the recording mode.
[
]/[S&Q] Mode
Aspect ratio, resolution, and frame rate output is according to the [Rec Quality] settings in the [Video] ([Image Format]) menu.
The YUV and bit value are output with YUV changed to 4:2:2 as shown below.
If the connected device is not compatible with the output system, output changes to match the connected device.
|
Recording to card |
HDMI output |
|
4:2:2 10 bit |
4:2:2 10 bit |
|
4:2:0 10 bit |
4:2:2 10 bit |
|
4:2:0 8 bit |
4:2:2 8 bit |
Video with a resolution exceeding 4K is output as C4K/4K resolution.
When set to a [Rec Quality] for high frame rate video, the resolution and frame rate may be down-converted for output.
For details (
Image Quality When Outputting via HDMI)
|
– Wi-Fi connection with a smartphone – Tethered recording |
[iA]/[P]/[A]/[S]/[M] Mode
Output is the same as []/[S&Q] mode during video recording.
Output is with a 16:9 aspect ratio during recording standby. Resolution, frame rate, YUV, and bit value output matches the connected device.
|
|
Notice Regarding HDMI Output
It may take some time for the output method to change.
When you use the HDMI output during recording, the image may be displayed with a time lag.
Beep sounds, AF beep, and electronic shutter sounds are muted during HDMI output.
When you check the image and audio from the TV connected to the camera, the microphone of the camera may pick up the sound from the speakers of the TV, producing an abnormal sound (audio feedback).
If this occurs, move the camera away from the TV or lower the volume on the TV.
Certain setting screens are not output via HDMI.
For information about the high temperature display (For information about the high temperature display)
Image Quality When Outputting via HDMI
Output is with the resolution and frame rate according to the [Rec Quality].
[System Frequency]: [59.94Hz (NTSC)]
[System Frequency]: [50.00Hz (PAL)]
[System Frequency]: [24.00Hz (CINEMA)]