Using an External Flash (Optional)

icon_mode-photo icon_mode-movie_gray

icon_mode-ia icon_mode-p icon_mode-a icon_mode-s icon_mode-m icon_mode-creative-motion_gray icon_mode-slow-and-quick-motion_gray

icon_care_s

Remove the lens hood to prevent vignetting.

Flash recording is not possible when the following functions are being used:

– [ELEC.]/[Silent Mode]

– High Resolution mode

– [Filter Settings]

– SH burst recording

Before attaching the Flash (optional), remove the hot shoe cover.

Refer to the operating instructions for the Flash for details about how to attach it.

Remove the hot shoe cover by pulling it in the direction indicated by arrow.

image_connect-flash-01

character_diamond Notes on Flash Recording

icon_care_s

Do not bring any object near the flash. Heat or light may cause the object to deform or discolor.

If you record repeatedly, time may be needed to charge the flash.

While the flash is charging, images will be recorded without the flash firing.

When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached.

When using a commercially available external flash, do not use one with reversed polarity or function for communicating with a camera.

It may cause the camera to malfunction, or it may not operate correctly.

Refer to the operating instructions for the external flash for details.