Notes When Using the Streaming Function

Notes When Using USB Tethering/Wired LAN

The following functions are not available while you are using the streaming function:

– [Like2100(HLG)]/[Like2100(HLG) Full Range] ([Photo Style])

– [Rec. File Format]

– [Rec Quality]

– [Rec Quality (My List)]

– [96kHz/24bit], [48kHz/24bit] ([Sound Rec Quality])

– [4ch Mic Input]

– [Loop Recording (video)]

– [Segmented File Recording]

– [Live Cropping]

– [Wi-Fi Function] (Wi-Fi connection destination during streaming can be set in [Streaming Setup].)

– Pairing function of [Bluetooth]

– [Reset]

The streaming function is not available when using the following functions:

– [HDMI RAW Data Output]

– When [System Frequency] is set to [24.00Hz (CINEMA)]

– During USB connection (PC)

– Tethered recording (except when connected via wired LAN)

The communication speed depends on the internet connection and the handset, so we recommend that you perform streaming tests beforehand.

If you turn the camera off without ending the streaming function, when the next time the camera is turned on, it is automatically reconnected to the connection destination that was previously connected.

The menu screen cannot be displayed while streaming.

The camera’s recording information will not be displayed on the streamed images.

The required conditions for streaming differ depending on the video sharing website. Check the video sharing website for details.

Notes When Using USB Tethering/Wired LAN

When the streaming function is not to be used, set [Streaming Function] to [OFF].

When set to [ON], if the [Connection Method] is set to [USB Tethering] or [LAN], power is supplied from the battery of this camera to the connected device, so the battery will be consumed faster.

For information about the high temperature display (For information about the high temperature display)

The network connection light does not light when connected to the internet via USB tethering.

After connecting via USB tethering or wired LAN, when charging the battery in the camera, make sure that the charging light of the camera lights red.

If the charging light does not light, reconnect the USB connection cable while the camera is turned off.