Panasonic

Before Use

character_diamondFirmware of Your Camera/Lens

Firmware updates may be provided in order to improve camera capabilities or to add functionality.

Make sure that the firmware of the camera/lens you purchased is the latest version.

We recommend using the latest firmware version.


bullet02To check the firmware version of the camera/lens, attach the lens to the camera and select [Firmware Version] in the [Setup] ([Others]) menu. You can also update the firmware in [Firmware Version]. (character_reference[Firmware Version])

bullet02For the latest information on the firmware or to download/update the firmware, visit the following support site:

https://panasonic.jp/support/global/cs/dsc/download/index4.html

(English only)


character_diamondHandling of the Camera

When using the camera, take care not to drop it, bump it, or apply undue force. These may cause malfunction or damage to the camera and lens.


If sand, dust, or liquid gets on the monitor, wipe it off with a dry soft cloth.

– Touch operations may be incorrectly recognized.


Do not place a hand inside the camera mount.

This may cause a failure or damage because the sensor is a precision device.


If you shake the camera while turning the camera off, a sensor may operate or a rattling sound may be heard. This is caused by the image stabilizer mechanism in the body. It is not a malfunction.


character_diamondSplash Resistant

Splash Resistant is a term used to describe an extra level of protection this camera offers against exposure to a minimal amount of moisture, water or dust. Splash Resistant does not guarantee that damage will not occur if this camera is subjected to direct contact with water.

In order to minimize the possibility of damage please be sure the following precautions are taken:

– Splash Resistant works in conjunction with the lenses that were specifically designed to support this feature.

– Securely close the doors, contact points cover, etc.

– When the lens or cap is removed or a door is open, do not allow sand, dust, and moisture to enter inside.

– If liquid gets on the camera, wipe it off with a dry soft cloth.


character_diamondCondensation (When the Lens, the Viewfinder or Monitor is Fogged Up)

bullet02Condensation occurs when there are temperature or humidity differences. Take care as this may lead to soiling, mold, and malfunctions in the lens, viewfinder, and monitor.

bullet02If condensation occurs, turn off the camera and leave it for approx. 2 hours. The fog will disappear naturally when the temperature of the camera becomes close to the ambient temperature.


character_diamondBe Sure to Perform Trial Recording in Advance

Perform trial recording in advance of an important event (wedding, etc.) to check that recording can be performed normally.


character_diamondNo Compensation Regarding Recording

Please note that compensation cannot be provided in the event that recording could not be performed due to a problem with the camera or a card.


character_diamondBe Careful with Regard to Copyrights

Under copyright law, you may not use the images and audio you have recorded for other than personal enjoyment without the permission of the copyright holder.

Be careful because there are cases where restrictions apply to recording even for the purpose of personal enjoyment.


character_diamondAlso Read “Cautions for Use” (character_referenceCautions for Use)