Monitor/Viewfinder Display Settings

Setting the Viewfinder

character_diamond Adjusting the Viewfinder Diopter

Rotate the diopter adjustment dial while looking through the viewfinder.

Adjust until you can clearly see the text on the viewfinder.

image_diopter-adjustment

Switching Between the Monitor and Viewfinder

With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor (A) works and the camera switches from monitor display to viewfinder display.

You can switch to viewfinder display or monitor display with [LVF] button (B).

Press [LVF].

image_display1

image_lvf-mon-auto_1-3

(D) Viewfinder display

(E) Monitor display

character_diamond Simultaneous Display on the Monitor and Viewfinder

When automatic viewfinder/monitor switching (C), if the monitor is rotated towards the lens, the recording screen seen when looking through the viewfinder is also displayed on the monitor.

image_display-of-monitor-and-viewfinder

icon_info_s

The eye sensor may not work correctly due to the shape of eyeglasses, the way the camera is held, or bright light shining around the eyepiece.

During video playback or slide show, automatic viewfinder/monitor switching does not work.

icon_related-info_s

To focus when looking through the viewfinder:

( character_reference [Eye Sensor AF])

The sensitivity of the eye sensor can be changed:

( character_reference [Eye Sensor])

You can set the display speed for live view on the monitor when recording pictures:

( character_reference [Monitor Frame Rate])

You can set the display speed for live view on the viewfinder when recording pictures.

( character_reference [LVF Frame Rate])

You can switch the display speed in the live view on the monitor and viewfinder when the focus mode is set to [AFC].

( character_reference [AFC Live View])

You can adjust the brightness, coloring, red or blue tints, etc., of the monitor/viewfinder:

( character_reference [Monitor Settings]/[Viewfinder])

You can adjust monitor/viewfinder luminance:

( character_reference [Monitor Backlight]/[LVF Luminance])

Switching the Display Information

Press [DISP.].

The display information is switched.

character_diamond Recording Screen

Monitor

gui_lcd-display1-4

(F) With information

(G) Without information

(H) Control panel

(I) Turned off (black)

Viewfinder

gui_lvf-display1-2

(J) With information

(K) Without information

icon_hints_s

Press [ button_return ] to switch between display/hide of the level gauge.

This can also be set by using [Level Gauge]. ( character_reference [Level Gauge])

icon_related-info_s

Control panel operation ( character_reference Control Panel)

You can hide the control panel and black screen:

( character_reference [Show/Hide Monitor Layout])

The display can be changed so that live view and display information do not overlap:

( character_reference [LVF/Monitor Disp. Set])

You can display the outline for the live view:

( character_reference [Framing Outline])

character_diamond Playback Screen

gui_lcd-display-playback-1-4

(L) With information

(M) Detailed information display

Pressing character_up character_down switches the display information. ( character_reference Detailed information display)

(N) Without information

(O) Without blinking highlights

This is a screen without blinking highlights display that is shown when [Blinking Highlights] of the [Custom] ([Monitor / Display (Photo)]) is set to [ON].

In other than this screen, overexposed parts of the screen will blink. ( character_reference [Blinking Highlights])