Panasonic

ISO Sensitivity

character_bullet-large[Dual Native ISO Setting]

character_bullet-large[ISO Sensitivity (photo)]


icon_mode-photoicon_mode-movie

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motionicon_mode-slow-and-quick-motion

You can set light sensitivity (ISO sensitivity).

With the default settings, you can set 100 to 51200 in 1/3 EV increments.

This camera supports Dual Native ISO which enables recording at high sensitivity with reduced noise by switching the base sensitivity.

The base sensitivity can also be fixed as necessary.


  1. Press [ISO].

image_button-iso

  1. Select ISO sensitivity.

character_bullet-largeRotate image_front-dial_s, image_rear-dial_s, or button_control-dial_s.

character_bullet-largeSelection is also possible by pressing [ISO].

button_exp-comp1

gui_iso-setting1

  1. Confirm your selection.

character_bullet-largePress the shutter button halfway.


icon_hints_s

Characteristics of the ISO Sensitivity

By increasing the ISO sensitivity, the shutter speed can be increased in dark places to prevent camera shake and subject blur. However, higher ISO sensitivities also increase the amount of noise in the recorded images.


character_diamondSetting Items (ISO Sensitivity)


[AUTO]

The ISO sensitivity is automatically adjusted according to the brightness.

bullet02Taking picture: Maximum [6400]character_asterisk1

bullet02Video recording: Maximum [6400]character_asterisk2


[100] to [51200]

The ISO sensitivity is fixed at the selected value.

bullet02The available ISO sensitivity range changes according to the setting of [Dual Native ISO Setting] in the [Photo]/[Video] ([Image Quality]) menu. (character_reference[Dual Native ISO Setting])

bullet02You can extend the ISO sensitivity range in between a lower limit of [50] and an upper limit of [204800] by setting [Extended ISO] (character_reference[Extended ISO]) to [ON] in the [Custom] ([Image Quality]) menu.


  1. Default setting. The upper limit can be changed with [ISO Sensitivity (photo)].

  1. Default setting. The upper limit can be changed with [ISO Sensitivity (video)].


bullet02When the following functions are being used, the ISO sensitivity that can be set is restricted.

– High Resolution mode: Up to an upper limit of [3200]

– [Filter Settings]: Up to an upper limit of [6400]

– [Cinelike D2]/[Cinelike V2] ([Photo Style]): Down to a lower limit of [200]

(The lower limit changes to [100] when [Extended ISO] is set.)

– [Like709] ([Photo Style]): Down to a lower limit of [100]

– [V-Log]/[REAL TIME LUT] ([Photo Style]): Down to a lower limit of [640], up to an upper limit of [51200]

(The lower limit changes to [320] when [Extended ISO] is set.)

– [Like2100(HLG)]/[Like2100(HLG) Full Range] ([Photo Style]): Down to a lower limit of [400]

– [Live View Composite]: Down to a lower limit of [100], up to an upper limit of [3200]

(The lower limit changes to [50] when [Extended ISO] is set.)


icon_related-info_s

bullet02You can set upper and lower limits for ISO Auto:

(character_reference[ISO Sensitivity (photo)], [ISO Sensitivity (video)])

bullet02You can change the intervals between ISO sensitivity settings values:

(character_reference[ISO Increments])

bullet02The setting range of ISO sensitivity can be extended:

(character_reference[Extended ISO])

bullet02You can set the lower limit for shutter speed for ISO Auto:

(character_reference[Min. Shutter Speed])

bullet02You can change the operation of the [ISO] button:

(character_reference[WB/ISO/Expo. Button])

bullet02You can set the upper limit for ISO Auto on the ISO sensitivity settings screen:

(character_reference[ISO Displayed Setting])

bullet02You can change the units for sensitivity to dB when recording video:

(character_reference[SS/Gain Operation])


[Dual Native ISO Setting]

icon_mode-photoicon_mode-movie

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motionicon_mode-slow-and-quick-motion

You can set whether to switch the base sensitivity automatically or to fix it.


button_menu-set character_arrow [icon_picture]/[icon_movie] character_arrow [icon_photo-quality] character_arrow Select [Dual Native ISO Setting]


[AUTO]

The base sensitivity is automatically switched according to the brightness.

bullet02ISO sensitivity can be set within the following ranges:

– [AUTO] / [100] to [51200]

– When [Extended ISO] is set: [AUTO] / [50] to [204800]


[LOW]

Sets the base sensitivity for low sensitivity.

bullet02ISO sensitivity can be set within the following ranges:

– [AUTO] / [100] to [800]

– When [Extended ISO] is set: [AUTO] / [50] to [800]


[HIGH]

The base sensitivity is automatically switched according to the brightness.

bullet02ISO sensitivity can be set within the following ranges:

– [AUTO] / [640] to [51200]

– When [Extended ISO] is set: [AUTO] / [320] to [204800]



icon_info_s

bullet02[Dual Native ISO Setting] is fixed to [AUTO] in the following cases:

– [iA] mode

– High Resolution Mode (When [Photo Style] is set to [V-Log]/[REAL TIME LUT])

– [Live View Composite] (When [Photo Style] is set to [V-Log]/[REAL TIME LUT])


[ISO Sensitivity (photo)]

icon_mode-photoicon_mode-movie_gray

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motion_grayicon_mode-slow-and-quick-motion_gray

Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].


button_menu-set character_arrow [icon_picture] character_arrow [icon_photo-quality] character_arrow Select [ISO Sensitivity (photo)]


[ISO Auto Lower Limit Setting]

Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO].

bullet02Set in the range between [100] and [25600].


[ISO Auto Upper Limit Setting]

Sets the upper limit for ISO sensitivity when ISO sensitivity is [AUTO].

bullet02Set to [AUTO] or in the range between [200] and [51200].



icon_info_s

bullet02When the following function is being used, [ISO Sensitivity (photo)] is not available:

– [Live View Composite]