Network settings
Confirming the network environment
Wireless LAN settings
This is the setting to connect with the iPhone/iPad or the Android terminal directly or to connect to the wireless access point via wireless LAN.
Direct connection ([DIRECT])
This is the setting to connect the unit to the iPhone/iPad or Android terminal directly.
The unit may restart if necessary when the setting is changed.
-
Select the [NETWORK] menu
[DEVICE SEL]
[WLAN].
-
Select the [NETWORK] menu
[WLAN PROPERTY]
[TYPE]
[DIRECT].
-
Select the [NETWORK] menu
[WLAN IPv4 SETTING]
[DHCP]
[SERVER].
When the DHCP server function of this unit is not to be used, select [OFF].
-
In the [NETWORK] menu
[WLAN PROPERTY] and [WLAN IPv4 SETTING], set each item as necessary.
For details about the setting items (
Setting items for [WLAN PROPERTY] and [WLAN IPv4 SETTING] when set to [DIRECT]).
-
Select the SSID of the unit from the SSID list in the iPhone/iPad or Android terminal, and enter the password (encryption key).
Display the wireless access point list screen in wireless LAN setting, and select SSID of the unit.
Factory setting: The model number of the unit you are using is set. (For example: [AG-X2], etc.)
When the password confirmation screen appears, enter the password (encryption key).
For details, refer to the operating instruction of the iPhone/iPad or Android terminal.
Factory setting: [01234567890123456789abcdef]
-
Close the menu or return to the level of the [NETWORK] menu.
-
Check the network connection.
Once connected, is displayed on the screen of the unit.
Setting items for [WLAN PROPERTY] and [WLAN IPv4 SETTING] when set to [DIRECT]
When [DIRECT] is set, the following menu settings are automatically set and cannot be changed:
– [WLAN IPv4 SETTING] [DEFAULT GATEWAY]
– [WLAN IPv4 SETTING] [PRIMARY DNS]
– [WLAN IPv4 SETTING] [SECONDARY DNS]
|
Connecting to the wireless access point ([INFRA(SELECT)]/[INFRA(MANUAL)])
This is the setting to connect the unit to a wireless access point.
When connecting by searching the wireless access point (SSID)
-
Select the [NETWORK] menu
[DEVICE SEL]
[WLAN].
-
Select the [NETWORK] menu
[WLAN PROPERTY]
[TYPE]
[INFRA(SELECT)].
-
Select the [NETWORK] menu
[WLAN IPv4 SETTING]
[DHCP]
[CLIENT].
When the wireless access point DHCP function is not to be used, select [OFF].
-
Select the [NETWORK] menu
[WLAN PROPERTY] and [WLAN IPv4 SETTING] and set each item as required.
For details about the setting items (
Setting items for [WLAN PROPERTY] and [WLAN IPv4 SETTING] when set to either [INFRA(SELECT)] or [INFRA(MANUAL)]).
-
Select the SSID of the wireless access point found with [NETWORK] menu
[WLAN PROPERTY]
[SSID].
Setting is completed when the [ENCRYPT KEY] (encryption key, password) is not set.
-
If the [ENCRYPT KEY] is set, enter the password, and select [Enter].
-
Close the menu or return to the level of the [NETWORK] menu.
-
Check the network connection.
Once connected, is displayed on the screen of the unit.
When entering the wireless access point (SSID) manually
-
Select the [NETWORK] menu
[DEVICE SEL]
[WLAN].
-
Select the [NETWORK] menu
[WLAN PROPERTY]
[TYPE]
[INFRA(MANUAL)].
-
Select the [NETWORK] menu
[WLAN PROPERTY] and [WLAN IPv4 SETTING] and set each item as required.
For details about the setting items (
Setting items for [WLAN PROPERTY] and [WLAN IPv4 SETTING] when set to either [INFRA(SELECT)] or [INFRA(MANUAL)]).
-
In [NETWORK] menu
[WLAN PROPERTY]
[SSID], enter the SSID of the wireless access point being connected to.
Setting is completed when the [ENCRYPT KEY] (encryption key, password) is not set.
-
If the [ENCRYPT KEY] is set, enter the password, and select [Enter].
-
Close the menu or return to the level of the [NETWORK] menu.
-
Check the network connection.
Once connected, is displayed on the screen of the unit.
Setting items for [WLAN PROPERTY] and [WLAN IPv4 SETTING] when set to either [INFRA(SELECT)] or [INFRA(MANUAL)]
For details of the network status, confirm by selecting the [NETWORK] menu
For details, contact the network administrator.
However, DNS cannot be disabled when [DHCP] is set to [CLIENT].
|
Wired LAN settings
These are the settings when using a wired LAN.
For the
-
Select the [NETWORK] menu
[DEVICE SEL]
[LAN].
-
In [NETWORK] menu
[LAN IPv4 SETTING] and [LAN IPv6 SETTING], set each item as required.
For details about the setting items (
Setting items for [LAN IPv4 SETTING], and [LAN IPv6 SETTING] when set to [LAN])
-
Close the menu or return to the level of the [NETWORK] menu.
-
Configure the settings of the wired LAN on your device such as a computer.
For more information, refer to the operating instructions or help for the connection device.
Setting items for [LAN IPv4 SETTING], and [LAN IPv6 SETTING] when set to [LAN]
For the
-
Select the [NETWORK] menu
[DEVICE SEL]
[USB-LAN].
-
In [NETWORK] menu
[USB-LAN IPv4 SETTING] and [USB-LAN IPv6 SETTING], set each item as required.
For details about the setting items (
Setting items for [USB-LAN IPv4 SETTING], and [USB-LAN IPv6 SETTING] when set to [USB-LAN])
-
Close the menu or return to the level of the [NETWORK] menu.
-
Configure the settings of the wired LAN on your device such as a computer.
For more information, refer to the operating instructions or help for the connection device.
Setting items for [USB-LAN IPv4 SETTING], and [USB-LAN IPv6 SETTING] when set to [USB-LAN]
For details, contact the network administrator.
However, DNS cannot be disabled when [DHCP] is set to [CLIENT].
In this case, reconnect the LAN cable or contact your network administrator. – (For the If [LAN IPv6 SETTING] (For the If [USB-LAN IPv6 SETTING] |
USB tethering setting [X2]
These are the settings when using USB tethering.
-
Select the [NETWORK] menu
[DEVICE SEL]
[USB TETHERING].
-
Enable USB tethering (Internet sharing) in the setting screen for network on the USB tethering device connected to the camera.
Allow access of the connected device if an alert to confirm permission is displayed on the USB tethering device. Connection will not be complete until permission is given.
-
Close the menu or return to the level of the [NETWORK] menu.
-
Check the network connection.
Once connected, is displayed on the screen of the unit.
|
Confirming the network status
The network status of the unit can be checked by performing the following operation.
-
Select the [NETWORK] menu
[INFORMATION]
[STATUS].
Confirming the network environment
-
Select the [NETWORK] menu
[UTILITY]
[NET CHECKER].
-
Touch the [
]/[
] as necessary to confirm the results.
|
Saving the check results
Check results can be saved to a SD card as necessary.
-
Select [SAVE] when the check results are displayed.
A confirmation screen is displayed.
-
Select [SET].
The file is saved.
¥PRIVATE¥MEIGROUP¥PAVCN¥SBG¥P2SD¥netchk.txt |