[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the unit.
[FILE]
Saves and loads the setting data.
For the saving and loading target (
Target items for scene file/setup file/initialization)
For the saving/loading scene file (Saving the scene file, Loading the scene file)
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
|
[LOAD] |
Selects and loads the scene file saved on the memory card into the unit. Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded. |
|
[SAVE] |
The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved in the memory card. |
|
[SAVE AS] |
The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file name. |
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
|
[LOAD] |
Selects the setup file saved on the memory card to load on the unit. The unit will automatically restart after loading. |
|
[SAVE] |
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the unit. |
|
[SAVE AS] |
Enter a file name to save the current setting values in the unit as a new setup file in the memory card. |
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the unit.
|
[LOAD] |
Loads setup file saved on the memory. The unit will automatically restart after loading. |
|
[SAVE] |
Saves the setup file to the memory. |
|
[INITIALIZE] |
Restores the factory settings from the current settings for the menus in the setup file. The unit will automatically restart after execution. |
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
[SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[LED]
[TALLY LED]
Sets whether the tally lamps are to illuminate or not.
|
[FRONT] |
The front tally lamp will illuminate. |
|
[REAR] |
The rear tally lamp will illuminate. |
|
[BOTH] |
Both the front and rear tally lamps will illuminate. |
|
[OFF] |
The tally lamps will not illuminate. |
(Factory setting: [BOTH])
[REC TALLY]
Sets whether the tally lamps are to illuminate or not when recording with the camera.
The items that can be selected are as follows.
[ON], [OFF]
(Factory setting: [ON])
[ACCESS LED]
Sets whether the card access lamps are to illuminate or not.
The items that can be selected are as follows.
[ON], [OFF]
(Factory setting: [ON])
[CLOCK]
[CLOCK SETTING]
Sets the calendar (date of the built-in clock) and time.
|
Year |
[2021]…[2037] |
|
Month |
[JAN]…[DEC] ([1]…[12]) |
|
Day |
[1]…[31] (This changes according to the year and month settings) |
|
Hour |
[0]…[23] |
|
Minute |
[0]…[59] |
[TIME ZONE]
Sets the time zone. It will switch to the time with the time difference added when the time zone setting is changed.
The items that can be set are as follows.
[−12:00]…[+12:00] (30 minutes steps), [+12:45], [+13:00]
(Factory setting: [+5:30])
[DATE FORMAT]
Sets the display order of the year, month, and date of the calendar (date of the built-in clock). This is reflected to the date display of the clip information.
The items that can be set are as follows.
[Y-M-D], [M-D-Y], [D-M-Y]
(Factory setting: [D-M-Y])
[USB DEVICE]
[CARD READER MODE]
Switches the unit to the card reader mode. A computer or other device can be connected via USB to use as a card reader of the memory card.
The items that can be selected are as follows.
[YES], [NO]
|
– When the [NETWORK] menu
The LCD monitor turns on when you perform the following operations: – Turn the multidial up or down – Touch the LCD monitor
– Turn the power off – Press the <EXIT> button – Press the multidial – Touch [ |
.
.
][SERVICE MODE]
Switches the unit to the service mode.
You can also check software information (licenses) on a computer and other equipment. Confirm “LICENSE.TXT” for the external drive recognized by a computer.
The items that can be selected are as follows.
[YES], [NO]
|
– When the [NETWORK] menu
The LCD monitor turns on when you perform the following operations: – Turn the multidial up or down – Touch the LCD monitor
– Turn the power off – Press the <EXIT> button – Press the multidial – Touch [ |
[INFORMATION]
[VERSION]
Displays the information of the unit.
|
[MODEL] |
Displays the product name of the unit. |
|
[SERIAL NO.] |
Displays the serial number of the unit. |
|
[VERSION] |
Displays the firmware version of the unit. |
[OPERATION TIME]
Displays the total operation time.
[UPDATE]
Updates the firmware.
Insert the memory card where the update file is saved into card slot 1.
The items that can be selected are as follows.
[YES], [NO]
[ECO MODE]
By setting [OTHERS] menu 
[ECO MODE] [BATTERY]/[AC]/[NETWORK], when there is no button operation or LCD monitor touch operation performed for a certain time, the power turns off automatically.
|
– While a memory card is being accessed (during recording, during playback, while formatting the media, etc.) – During pre-recording – In card reader mode
– When using the AC adaptor
– When connected to a network via wired LAN, wireless LAN or USB tethering
|
[BATTERY]
When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
The items that can be selected are as follows.
[ON], [OFF]
(Factory setting: [ON])
[AC]
If there are no operations for approximately 15 minutes while using the AC adaptor, the power turns off automatically.
The items that can be selected are as follows.
[ON], [OFF]
(Factory setting: [ON])
[NETWORK]
If there are no operations for approximately 15 minutes when the [NETWORK] menu [DEVICE SEL] is set to anything other than [OFF] while not connected to the network, the power turns off automatically.
The items that can be selected are as follows.
[ON], [OFF]
(Factory setting: [ON])
[MENU INITIALIZE]
Returns the setting value of the menu to the factory setting. The unit is restarted after executing.