Relay recording

When inserting memory cards into the 2 card slots, recording can continue on the second memory card if the remaining recording capacity of the other memory card is exhausted.

co_other_relay_rec

(A) Card slot 1

(B) Card slot 2

(D) Pause

During recording

Automatically switch the recording target card slot

Replace with a different recordable memory card

Select the [RECORDING] menu [2 SLOTS FUNC.] [RELAY REC].

[RELAY] is displayed in the 2 slot function display of the camera image screen.

A slanted line is displayed on the [RELAY] display when the relay recording is not possible, such as when a memory card is not inserted in either of the 2 card slots.

Press the REC button.

The recording target switches to another memory card when the remaining recording capacity of one of the memory cards is exhausted during recording and relay recording starts. The number of the card slot that became the recording target is displayed with black and white inverted. Recording can be performed on 3 or more memory cards. Replace the memory card with no more remaining recording capacity after the recording target has switched.

To change the recording target card slot before starting the recording, press the USER button or touch the USER button icon to which [SLOT SEL] is assigned. This will not operate during recording. ( character_reference Assigning functions to the USER buttons)

It may take some time to recognize the memory card when the memory card is inserted. When recording to 3 or more memory cards by replacing a memory card while recording, replace the memory card with recording capacity sufficiently left on the memory card that is recording.

The recording target cannot be switched when the remaining recording capacity of the relay memory card is less than 1 minute.

After relay recording, a message about the remaining card capacity is displayed. Replace the memory card that has run out of capacity.

The maximum continuous recording time for relay recording is 10 hours.

The recording is stopped once when the recording time of relay recording exceeds 10 hours. The recording is automatically resumed after few seconds.

There are recording functions that cannot be used simultaneously. ( character_reference Recording function that cannot be used simultaneously)