Playing back clips
-
In the [SYSTEM] menu [FREQUENCY], select the system frequency to play back.
-
In the [SYSTEM] menu [FILE FORMAT], select the file format to play back.
-
In the [SYSTEM] menu [REC FORMAT], select the signal format and codec mode to play back.
-
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
-
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
-
In the [THUMBNAIL] menu [PLAYBACK] [CLIP SEL], select the card slot of the memory card to play back.
[ALL SLOT]:
Displays all the clips recorded on every memory card in each card slot.
Displays in the order of the clips in card slot 1, and then clips in the card slot 2.
[SLOT1]:
Displays only the clips recorded on the memory card in card slot 1.
[SLOT2]:
Displays only the clips recorded on the memory card in card slot 2.
[SAME FORMAT]:
Displays only the clips recorded in the same format as the system format.
Clips recorded in the same format match the current settings for each item of the [SYSTEM] menu [FREQUENCY]/[FILE FORMAT]/[REC FORMAT].
-
Select the clip to play back.
is displayed on the clip that cannot be played back.
To play back the clip with displayed, check the information of the clip with the clip information, and try operating from the beginning again.
Playback from touch operations and operation icons
(A) Direct playback bar
Playback operation |
Operating procedure |
Playback/pause |
Touch . |
Fast-reverse playback |
Touch . Touch twice to increase the speed. |
Fast-forward playback |
Touch . Touch twice to increase the speed. |
Stop (return to thumbnail screen) |
Touch . |
Skip playback (cue up of the clip) |
Touch the LCD monitor while playing back, and slide from right to left (left to right). When sliding from left to right, the clip skips to the beginning of the previous clip if the current playback position of the clip is at less than 3 seconds from the beginning. The clip skips to the beginning of the current clip if the current playback position of the clip is at 3 seconds or more from the beginning. |
Slow playback |
Touch and hold while paused. ( is reverse slow playback) When is touched, slow playback is performed with continuous frame-by-frame playback. When is touched, playback returns to normal. The frame-by-frame interval and the display time for each frame for the reverse slow playback differ depending on the type of the clip. |
Frame-by-frame playback |
Touch while paused. ( is reverse frame-by-frame playback) When is touched, playback returns to normal. The frame-by-frame interval for reverse frame-by-frame playback differs depending on the type of the clip. |
Direct playback |
Touch the direct playback bar, or slide it while touching. The playback video is paused during the operation. Playback is started by releasing the finger. |
If the operation icons are displayed but not touched for a while, the operation icons disappear. To display again, touch the screen. Operations of the unit or some performance may become slow for the clip with large file size. Operations of the unit or some performance may become slow when there are large number of clips on the memory card. Playback will stop once by switching the card slot when the [THUMBNAIL] menu [PLAYBACK] [CLIP SEL] [ALL SLOT]/[SAME FORMAT] is set, and then the clips of all the memory cards are displayed. Playback is not possible across 2 memory cards. Playback stops when the memory card is removed during playback. During playback of a clip, playback may be suspended or black screen may be displayed due to switching of a clip. Motion picture compatibility This unit is based on AVCHD Progressive/AVCHD. Even if the devices used have compatible standards, when playback of clip recorded using another device is performed using this device, or when clip recorded using this device is played back in another device, playback may not proceed normally, or may not be possible. (Please check compatibility in the instruction manual of your device.) Clips recorded with devices other than this unit are not supported by this unit. |
Adjusting the volume during playback
You can adjust the playback volume by operating the zoom lever.
Towards <T>: Raise the volume
Towards <W>: Lower the volume
If no operations are performed, the setting is ended.
The <EXIT> button is disabled.