Panasonic

Screen display during shooting

other_display_status_rec

  1. Displayed when using icon_model-x2.


  1. Time code

Each time you press the <COUNTER> button, the next display is shown or it switches to no display.


[TCG character_asterisk-3character_asterisk-3: character_asterisk-3character_asterisk-3: character_asterisk-3character_asterisk-3: character_asterisk-3character_asterisk-3]:

Displays the time code. [TCR character_asterisk-3character_asterisk-3:character_asterisk-3character_asterisk-3:character_asterisk-3character_asterisk-3:character_asterisk-3character_asterisk-3] will be displayed during playback.

bullet02(For the icon_model-x2)

[TCG] is displayed with black and white inverted during the slave lock into the external input time code.


[UBG character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3]:

Displays the user bits. [UBR character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3 character_asterisk-3character_asterisk-3] will be displayed during playback.


[CLIP character_asterisk-3: character_asterisk-3character_asterisk-3: character_asterisk-3character_asterisk-3: character_asterisk-3character_asterisk-3]:

Displays the counter value of each clip. This is displayed when the [RECORDING] menu character_arrow [REC COUNTER] is set to [CLIP]. Displays the counter value of the clip being played back during playback.


[character_asterisk-3:character_asterisk-3character_asterisk-3:character_asterisk-3character_asterisk-3:character_asterisk-3character_asterisk-3]:

Displays the cumulative counter value from the reset position. This is displayed when the [RECORDING] menu character_arrow [REC COUNTER] character_arrow [TOTAL] is set.



  1. Frame rate


[character_asterisk-3character_asterisk-3fps]:

Frame rate is displayed when set to the [SCENE FILE] menu character_arrow [VFR] character_arrow [ON].


[S.SLOW120]:

Displayed when set to the [SYSTEM] menu character_arrow [SUPER SLOW] character_arrow [ON] and the [SYSTEM] menu character_arrow [FREQUENCY] character_arrow [59.94Hz].


[S.SLOW100]:

Displayed when set to the [SYSTEM] menu character_arrow [SUPER SLOW] character_arrow [ON] and the [SYSTEM] menu character_arrow [FREQUENCY] character_arrow [50.00Hz].


(No display):

It is not displayed when the [SCENE FILE] menu character_arrow [VFR] and the [SYSTEM] menu character_arrow [SUPER SLOW] are set to [OFF].



  1. <AUTO/MANU> switch

Displayed when the <AUTO/MANU> switch is set to <AUTO>.


  1. Message display area for stop of cooling fan

Displays a message when the cooling fan has stopped.


  1. Recording status

Displays the recording status of the memory card in card slot 1 or card slot 2.


imageicon_card_slot1_target, imageicon_card_slot2_target:

Not target for recording.


imageicon_card_slot1_target (flashing), imageicon_card_slot2_target (flashing):

Recognizing the memory card.


imageicon_card_slot1_not_target, imageicon_card_slot2_not_target:

The recording is stopped while the recording target memory card is inserted.


imageicon_redimageicon_card_slot1_not_target, imageicon_redimageicon_card_slot2_not_target:

Recording.


imageicon_redimageicon_card_slot1_not_target (Flashing red dot), imageicon_redimageicon_card_slot2_not_target (Flashing red dot):

Processing to stop the recording.


[Pimageicon_card_slot1_not_target], [Pimageicon_card_slot2_not_target]:

Recording is stopped with pre-recording is enabled and the recording target memory card is inserted.


(No display):

It is in one of the following conditions.

– A memory card has not been inserted.

– The memory card cannot be recognized.


bullet02The following indicators are displayed in card slot 1 only.


[P]:

Pre-recording is enabled, and the memory card is not inserted in the card slot, or the memory card is not recognized.


imageicon_red:

The tally lamps are instructed to illuminate in red via network.


imageicon_green:

The tally lamps are instructed to illuminate in green via network while the recording is stopped.

The tally lamps do not illuminate green.



  1. Remaining recording capacity and status of the memory card

Displays the remaining recording capacity and status of the memory card in card slot 1 or card slot 2.


[0min] to [999min]:

Remaining recording capacity (999 minutes or more is displayed as [999min])

– The display will flash when the remaining recording capacity becomes 2 minutes or less.

– The recording capacity available for simultaneous recording (recording capacity for the memory card of the 2 memory cards with less recording capacity) is displayed when simultaneous recording is performed.


[WP]:

Write protected (the write protection switch of the memory card is set to the LOCK side)


[END]:

No remaining recording capacity (no remaining recording capacity on the memory card)


[ERR]:

A memory card that cannot record is inserted (the card is recognized but cannot record due to a format error, a card other than a memory card being inserted, etc.)


[!SDXC]:

An SDXC memory card is not inserted in MOV recording/MP4 recording


(No display):

It is in one of the following conditions.

– A memory card has not been inserted.

– The memory card cannot be recognized.



  1. High-sensitivity mode


[H.SENS.]:

Displayed when set to the [SYSTEM] menu character_arrow [SHOOTING MODE] character_arrow [HIGH SENS.].



  1. External equipment recording operation control status (<SDI OUT>/<HDMI> terminal)

Displays the control status of the recording start and recording stop on the external equipment connected to the <SDI OUT> terminal and the <HDMI> terminal.


[imageicon_redS/H]character_asterisk:

Recording instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.


[S/H]character_asterisk:

Pause instruction is output to the output from the <SDI OUT> terminal/<HDMI> terminal.


[imageicon_redSDI]character_asterisk:

Recording instruction is output to the output from the <SDI OUT> terminal.


[SDI]character_asterisk:

Pause instruction is output to the output from the <SDI OUT> terminal.


[imageicon_redHDMI]:

Recording instruction is output to the output from the <HDMI> terminal.


[HDMI]:

Pause instruction is output to the output from the <HDMI> terminal.



  1. Special recording function

Displays the status of special recording function.


[INTRVL]:

The interval recording is stopped.


[I-REC]:

The interval recording is in progress. (Displayed in red)



  1. 2-slot function

Displays the setting status of the recording function using 2 memory cards.

It is displayed with a slanted line if it is in a condition that cannot perform 2-slot recording even if each function is enabled.


[RELAY]:

When the relay recording is enabled


[SIMUL]:

When the simultaneous recording is enabled


[BACKGR]:

When the background recording is enabled


[DUAL 50M]character_asterisk:

When dual codec recording is enabled and [DUAL CODEC SETTING] is [FHD 50Mbps]


[DUAL 8M]character_asterisk:

When dual codec recording is enabled and [DUAL CODEC SETTING] is [FHD 8Mbps]


(No display):

During standard recording



  1. Flash band compensation function


[FBC]:

Displayed when the flash band compensation function is operating.



  1. Streaming status

Displays the streaming status.


imageicon_steaming_1:

When the unit is connected to a device to receive the streaming video, and the streaming video is distributed


imageicon_steaming_1 (flashing):

When the unit is being connected to a device to receive the streaming video


imageicon_steaming_2:

When the streaming function is enabled, it is in condition to operate properly, and the streaming video is not distributed


imageicon_steaming_3:

When there is an error in the streaming function and cannot operate


(No display):

When the streaming function is disabled



  1. Dynamic range stretcher function/high dynamic range recording functioncharacter_asterisk/V-Log recording functioncharacter_asterisk


[DRS]:

When the dynamic range stretcher function is working.


[HDR]character_asterisk:

When set to the [SCENE FILE] menu character_arrow [GAMMA MODE SEL] character_arrow [HLG].


[VLog]character_asterisk:

When set to the [SCENE FILE] menu character_arrow [GAMMA MODE SEL] character_arrow [V-Log].



  1. Connection status of the wired LAN, wireless LAN or USB tethering

Displays the connection status of the wired LAN, wireless LAN or USB tethering.


imageicon_rop_not_connect_1:

When set to the wireless LAN and the ROP is not connected


imageicon_rop_connect:

When set to the wireless LAN and the ROP is connected


imageicon_rop_not_connect_2:

When set to the wireless LAN and the wireless LAN is not operating properly


imageicon_icon_ic_lan_on:

When set to the wired LAN and the ROP is not connected


imageicon_ic_lan_on_rop:

When set to the wired LAN and the ROP is connected


imageicon_rop_connect_2:

When set to the wired LAN and the wired LAN is not operating properly


imageicon_ic_usb-tether_oncharacter_asterisk:

When set to the USB tethering and the ROP is not connected


imageicon_ic_usb-tether_on_ropcharacter_asterisk:

When set to the USB tethering and the ROP is connected


imageicon_rop_not_connect_3character_asterisk:

When set to the USB tethering and the USB tethering is not operating properly


(No display):

When wired LAN, wireless LAN, and USB tethering are all disabled



  1. Power status


imageicon_battery_6:

Displays the remaining battery level while powered with the battery. (The battery status display will change as imageicon_battery_6 character_arrow imageicon_battery_5 character_arrow imageicon_battery_4 character_arrow imageicon_battery_3 character_arrow imageicon_battery_2 character_arrow imageicon_battery_1 while the remaining battery level gets lower. It will flash in red when the remaining battery level is zero.)


imageicon_ac_adaptor:

Displayed when powered with the AC adaptor.



  1. Audio level meter

Displays the audio level meter.

A white frame is displayed at the position of the reference level set in the [AUDIO] menu character_arrow [REC CH SETTINGS] character_arrow [HEAD ROOM]. (Eighth from the left when set to [20dB], ninth from the left when set to [18dB], and 12th from the left when set to [12dB])


imageicon_not_rec_audio:

Displayed when audio cannot be recorded. (When super slow is enabled, etc.)



  1. Luminance of Y GET

Displays the luminance level in 0 % through 109 % when the Y GET function is operating.


  1. Gain

Displays the gain value.


[AGC]:

Displayed when the auto gain control is operating.


[SG]:

Displayed when [SUPER GAIN] is working.


[SG+]:

Displayed when [SUPER GAIN+] is working.



  1. ND filter

Displays the transmittance of the selected ND filter.


[ND1/64]:

Reduces the amount of light entering the MOS sensor to 1/64.


[ND1/16]:

Reduces the amount of light entering the MOS sensor to 1/16.


[ND1/4]:

Reduces the amount of light entering the MOS sensor to 1/4.


[ND:CLR]:

The ND filter is not used.



  1. Date and time information

Displays the date and time information. It is not displayed when the time stamp function is enabled.

The display contents follow the setting in the [VIDEO OUT/LCD/VF] menu character_arrow [INDICATOR] character_arrow [DATE/TIME]. (character_reference[DATE/TIME])

bullet02The display order for the year, month, and date follows the setting in the [OTHERS] menu character_arrow [CLOCK] character_arrow [DATE FORMAT].

– Displays in the yyyy mmm dd hh:mm:ss format when set to [Y-M-D].

– Displays in the mmm dd yyyy hh:mm:ss format when set to [M-D-Y].

– Displays in the dd mmm yyyy hh:mm:ss format when set to [D-M-Y].


mmm:

Month (JAN (January), FEB (February), MAR (March), APR (April), MAY (May), JUN (June), JUL (July), AUG (August), SEP (September), OCT (October), NOV (November), DEC (December))


dd: Date


yyyy: Year


hh: Hour


mm: Minute


ss: Second



  1. Shutter speed

Displays the shutter speed.


[A.SHTR]:

Displayed when the auto shutter is operating.



  1. Auto iris control status

Displays the control status of the auto iris.


[STD]:

Standard auto iris control


[SPOT]:

Auto iris control for spot light


[BACK]:

Auto iris control for the backlight compensation



  1. AE level

Displays the exposure compensation value.


  1. Iris

Displays the iris value.


  1. Zoom

Displays the zoom value.

The display of the zoom value follows the setting in the [VIDEO OUT/LCD/VF] menu character_arrow [INDICATOR] character_arrow [ZOOM/FOCUS].

bullet02Displays in the position value from [00] to [99] when set to [NUMBER].

bullet02Displays in millimeter unit when set to [mm/feet] or [mm/m].

bullet02Displays [i] when [i.ZOOM] is enabled.

bullet02[i] is displayed with black and white inverted when [i.ZOOM] is operating.

bullet02[Z] is displayed with black and white inverted when [FAST ZOOM] is enabled.


  1. System resolution/system frequency

Displays the system resolution and the system frequency set in the [SYSTEM] menu character_arrow [REC FORMAT].

bullet02[2160-59.94p], [2160-50.00p], [2160-29.97p], [2160-25.00p], [2160-23.98p], [1080-59.94p], [1080-50.00p], [1080-29.97p], [1080-25.00p], [1080-23.98p], [1080-59.94i], [1080-50.00i], [720-59.94p], [720-50.00p]


  1. Recording format

Displays the file format and the recording codec set in the [SYSTEM] menu character_arrow [FILE FORMAT] and [REC FORMAT].

bullet02[MOV 420 150M], [MOV 420 100M], [MOV 422 150M], [MOV 422 100M], [MOV 422 50M], [MOV HEVC 200M], [MOV HEVC 150M], [MOV HEVC 100M], [MOV ALL-I 200M], [MOV ALL-I 100M]

bullet02[MP4 420 72M], [MP4 420 50M], [MP4 HEVC 100M], [MP4 HEVC 72M]

bullet02[AVCHD PS], [AVCHD PH], [AVCHD HA], [AVCHD PM]


  1. Clip name

Displays the name of the clip being recorded with up to 8 characters from the beginning.


  1. Recommended ND filter

Displays the ND filter recommended in the current shooting condition.


  1. Message display area

Displays messages, such as the status of the camera and warnings.

Displays the warning status of the unit in the STATUS screen for the mode check.


  1. Level gauge

Tilt in horizontal direction or vertical direction can be checked.

bullet02This is not output externally to the TV/monitor. View it on the LCD monitor/viewfinder of this unit.


  1. Main face frame (orange)/Face detection frame (white)

Displayed when a face has been detected while the face detection AE&AF function is operating.


  1. Tracking frame (green)

Displayed when a subject has been touched while the face detection AE&AF function is operating. The function switches to the tracking AE&AF function.


  1. Error display of auto white balance

Displays the error status of the auto white balance.


  1. Error display of auto black balance

Displays the error status of the auto black balance.


  1. Remote control status in an IP connection


[IP REMOTE]:

Displayed when the remote control is possible in the IP connection.


[IP REMOTE] (flashing):

Displayed when waiting for the connection in the IP connection.



  1. Multi manual function

Displays the contents of the multi manual function. (character_referenceMulti manual function).


  1. Color temperature

Displays the white balance setting value (Ach/Bch/Preset) and color temperature. This is not displayed when IR recording is enabled.


[ATW]:

Displayed when the auto tracking white balance is operating.


[LOCK]:

Displayed when the auto tracking white balance is locked.



  1. Optical image stabilizer function


imageicon_ois:

Displayed when the optical image stabilizer function is operating.



icon_hybrid_ois:

Displayed when the hybrid optical image stabilizer function is operating.



  1. Scene file name

Displays the name of the selected scene file.


  1. Area mode function, AF area width adjustment function, face detection/tracking AE&AF function


[AREA]:

Displayed when the area mode function is operating.


[AF-AREA]:

Displayed when the AF area width adjustment function is operating.


[FACE]:

Displayed when the face detection AE&AF function is working.


[TRACK]:

Displayed when the tracking AE&AF function is working.



  1. Waveform monitor

Displays the video status in waveform or vector.

bullet02This is not output externally to the TV/monitor. View it on the LCD monitor/viewfinder of this unit.


  1. Temperature increase warning


[icon_temperature-warning]:

Displayed when the temperature of this unit has increased. If you continue to use the unit like this, a message indicating that the unit cannot be used will be displayed and you will be unable to use recording functions and network functions. Wait until the temperature of the unit decreases.



  1. IR recording


[IR]:

Displayed when the IR recording is enabled.



  1. Digital zoom

Displays the digital zoom ratio.


[D2×]: 2 times


[D5×]: 5 times


[D10×]: 10 times



  1. Focus

Displays the focus value.

The display of the focus value follows the setting in the [VIDEO OUT/LCD/VF] menu character_arrow [INDICATOR] character_arrow [ZOOM/FOCUS].

bullet02Displays in the position value from [00] to [99] when set to [NUMBER].

bullet02Displays in feet unit when set to [mm/feet].

bullet02Displays in meter unit when set to [mm/m].


[icon_focus-macro]:

Displayed when the focus macro is enabled.


[AF]:

Displayed when set to auto focus mode. Displayed with black and white inverted when focus macro is operating.


[MF]:

Displayed when set to manual focus mode. Displayed with black and white inverted when focus macro is operating.



  1. Audio monitor volume adjustment

Displayed when the zoom lever or the multidial is used to adjust the volume of the speaker or headphones. The display is cleared approximately 3 seconds after the operation.