Monitoring the audio

Audio recorded with the unit can be heard with a speaker or headphones.

Audio is not output from the speaker during shooting.

character_diamond Setting the output audio

Sets the audio channel and the format to be output from the headphone terminal.

Select the [AUDIO] menu [OUTPUT SETTINGS] [AUDIO OUT].

Select the type of audio.

[CH1]:

Outputs the signal for audio channel 1 as monaural.

[CH2]:

Outputs the signal for audio channel 2 as monaural.

[CH1/2 STEREO]:

Outputs the signals of the audio channel 1 and the audio channel 2 as stereo.

[CH1/2 MIX]:

Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.

If [AUDIO OUT] is assigned to the USER button, pressing the USER button switches the audio channel to output and format.

Toggles [CH1], [CH2], [CH1/2 STEREO], and [CH1/2 MIX] in order each time the USER button is pressed or the USER button icon is touched.

Adjust the volume of the headphones and built-in speaker as follows.

– During recording, volume is adjusted with the [ imageicon_operation_icon AUDIO MON] of the multi manual function. ( character_reference Adjusting headphone volume)

– During playback, volume is adjusted with the zoom lever. ( character_reference Adjusting the volume during playback)