Panasonic

HDMI Output Settings

character_bullet-largeOutputting the Camera Information Display via HDMI

character_bullet-largeOutputting Control Information to an External Recorder

character_bullet-largeOutputting Audio via HDMI

character_bullet-largeOutputting the Enlarged Live Display (Video) via HDMI

character_bullet-largeOutputting as 4K/120p (4K/100p) via HDMI

character_bullet-large[4K/120p Power Save Live View] ([4K/100p Power Save Live View])


icon_mode-photoicon_mode-movie

icon_mode-iaicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motion


Outputting the Camera Information Display via HDMI

Output the camera information display to an external device connected by HDMI.


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [Info Display]


Settings: [ON]/[OFF]


icon_info_s

bullet02There is the following restriction when connected via HDMI and [Info Display] is set to [ON]:

– [Touch Tab] is not available.


Outputting Control Information to an External Recorder

Recording start and stop control information is output to an external recorder connected by HDMI.


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [HDMI Recording Control]


Settings: [ON]/[OFF]


bullet02[HDMI Recording Control] can be set when [HDMI Time Code Output] is set to [ON] in [icon_mode-p-motion_table] mode. (character_reference[HDMI Time Code Output])

bullet02Control information is output when pressing the video rec. button or shutter button, even if the video cannot be recorded (such as when there is no card inserted into the camera).

bullet02Only compatible external devices can be controlled.


Outputting Audio via HDMI

Output audio to an external device connected by HDMI.


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [Sound Output (HDMI)]


Settings: [ON]/[OFF]


Outputting the Enlarged Live Display (Video) via HDMI

Output the enlarged screens from [MF Assist] or [Enlarged Live Display(Video)] to an external device connected by HDMI.


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [Enlarged Live Display]


[MODE1]

Enlarged display of live view is output during standby for video recording.

bullet02Resolution and frame rate output are the same as those set at [Down Convert].

bullet02When [4K/120p Output] ([4K/100p Output]) is set to [ON] and the enlarged display of live view is used, the resolution and frame rate of the video is output via HDMI with C4K/120p (100p) or 4K/120p (100p), but the image refresh rate will be 30 fps or lower.


[MODE2]

Enlarged display of live view is output during standby for video recording and during video recording.

bullet02The resolution and frame rate of the video output via HDMI will be FHD/60p or less.

bullet02When [Down Convert] is set to [C4K/4K] or [OFF], [MODE2] is not available.

bullet02When [4K/120p Output] ([4K/100p Output]) is set to [ON], [MODE2] is not available.


[OFF]

Enlarged display of live view is not output.

bullet02When the monitor/viewfinder of the camera is displaying the enlarged display, the camera information display is not output via HDMI.

bullet02When [4K/120p Output] ([4K/100p Output]) is set to [ON] and the enlarged display of live view is used, the image refresh rate on the camera will be 30 fps or lower.



Outputting as 4K/120p (4K/100p) via HDMI

When set to a recording quality of C4K/120p (100p) or 4K/120p (100p), video is output to an external device connected via HDMI as C4K/120p (100p) or 4K/120p (100p).


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [4K/120p Output] ([4K/100p Output])


[ON]

Output as C4K/120p (100p) or 4K/120p (100p) via HDMI.

If the external device is not compatible, output is FHD/60p or less.

bullet02While outputting as C4K/120p (100p) or 4K/120p (100p) via HDMI, video cannot be recorded to cards.

bullet02The YUV and bit value are output at 4:2:2 10-bit.

If the external device is not compatible, the output is at 4:2:0 10-bit.


[OFF]

Output as FHD/60p or less via HDMI.



icon_info_s

bullet02When the following function is being used, [4K/120p Output] ([4K/100p Output]) is not available:

– [HDMI RAW Data Output]


[4K/120p Power Save Live View] ([4K/100p Power Save Live View])

When outputting C4K/120p (100p) or 4K/120p (100p) via HDMI, activation of the image sensor is limited during recording standby to reduce power consumption and keep the temperature from rising.

bullet02This can be set when [HDMI Recording Control] and [4K/120p Output] ([4K/100p Output]) are [ON].


button_menu-set character_arrow [icon_custom-menu] character_arrow [icon_setup-inout] character_arrow [HDMI Rec Output] character_arrow Select [4K/120p Power Save Live View] ([4K/100p Power Save Live View])


[ON]

Activation of the camera’s image sensor is limited to C4K/60p (50p) or 4K/60p (50p) during recording standby.

The limitation is canceled when recording is started by pressing either the video rec. button or shutter button on the camera.

bullet02The output destination device recognizes as C4K/120p (100p) or 4K/120p (100p), but if the recording is started on the external recorder during recording standby, recording is made with a limited image quality, so use the camera to perform the operations for starting and stopping video recording on the external recorder.

(character_referenceOutputting Control Information to an External Recorder)


[OFF]

Output stays C4K/120p (100p) or 4K/120p (100p) via HDMI even during recording standby.



icon_info_s

bullet02The camera is released from the time code slave state when you use the [4K/120p Power Save Live View] ([4K/100p Power Save Live View]) function.