Streaming Settings

icon_mode-photo_gray icon_mode-movie

icon_mode-ia_gray icon_mode-p_gray icon_mode-a_gray icon_mode-s_gray icon_mode-m_gray icon_mode-creative-motion

Configures streaming settings.

button_menu-set [] [ icon_setup-inout ] Select [Streaming]

gui_streaming_eng

[Streaming Function]	Enables/disables the streaming function. The settings may not be reflected when the camera is connected to USB devices. Reconnect the USB connection cable if this occurs. Before setting to [ON], set [Streaming Method], [Connection Method], and [Streaming Setup].
[Streaming Method]	[Direct]: Directly stream from the camera to the live streaming service. (Supported protocols: RTMP/RTMPS) [Via PC Software]: Use the streaming software on a PC to stream. (Supported protocols: RTP/RTSP)
[Connection Method]	[Wi-Fi]1: Connect to an access point such as a smartphone via Wi-Fi. [USB Tethering]1: Connect using the USB tethering function of a smartphone. [LAN]2: Use a commercially available USB ethernet adaptor to connect to a PC with a LAN cable.
[Streaming Setup]	Make advanced settings for streaming. ([Streaming Setup])

Displayed when [Streaming Method] is set to [Direct].

Displayed when [Streaming Method] is set to [Via PC Software].

character_diamond [Streaming Setup]

[Streaming Quality]	Sets the image quality that will be streamed. ([Streaming Quality])
[RTSP Port]1	Set the RTSP port number. [CHANGE]: Change to any number. (Up to 65535) [DEFAULT]: Set to the default setting (554). The following numbers cannot be set: 0 to 553, 555 to 1023, 1900, 10669, 10670, 15740, 50001, and 60606
[Streaming Address]2	Displays the current streaming destination address. To change the streaming destination, press [DISP.] first then input the streaming destination address.
[Save/Load Streaming Address]2	[Save]	Saves the current streaming destination address to the card. If saving new data, then select [New File], and if overwriting an existing file, select that existing file. When [New File] is selected, a screen to select the file name to save as is displayed. [OK]: Saves using the file name on the screen. [Change the file name]: Changes the file name and saves the file. Available characters: alphabetic characters (uppercase), numerals, up to 8 characters When you set [Password], the screen for entering the password (4-digit numeral) is displayed.
	[Load]	Copy the streaming destination address in the card to the camera. If you set a password when you saved the streaming destination address on the card, the password entry screen is displayed.
	[Delete]	Deletes the streaming destination address within the card.
	[Keep Settings While Format]	When formatting the card, you can keep the streaming destination address saved in the card and format.
	[Password]	Select whether to set a password when you save the streaming destination address on the card.
[Wi-Fi Connection Setting]3	Sets the wireless access point the camera connects to when streaming. To change the destination, press [DISP.]. ([Via Network])

Displayed when [Streaming Method] in [Streaming] is set to [Via PC Software].

Displayed when [Streaming Method] in [Streaming] is set to [Direct].

Displayed when [Connection Method] in [Streaming] is set to [Wi-Fi].

icon_info_s

Up to 10 streaming destination addresses can be saved onto one card.

Set [Wi-Fi Connection Setting] before setting [Streaming Function] to [ON].

If you forget the password, save the streaming destination address again with a new password.

icon_related-info_s

How to enter characters ( character_reference Entering Characters)

character_diamond [Streaming Quality]

Video compression format:

– [H.265] streaming quality: H.265/HEVC

– [H.264] streaming quality: H.264/MPEG-4 AVC

Audio format: AAC (2ch)

(A) Frame rate

(B) Bit rate (Mbps)

(D) [USB Tethering]

(E) [LAN]

[System Frequency]: [59.94Hz (NTSC)]
[Streaming Quality]	[Image Area of Video]	Resolution	(A)	(B)	[Connection Method]
[Streaming Quality]	FULL	Resolution	(A)	(B)	(C)	(D)	(E)
[H.265/4K/50M/60p]		3840×2160	59.94p	50	—	—
[H.265/4K/25M/60p]		3840×2160	59.94p	25	—	—
[H.265/4K/25M/30p]		3840×2160	29.97p	25	—	—
[H.265/4K/12.5M/30p]		3840×2160	29.97p	12.5	—	—
[H.265/FHD/20M/60p]		1920×1080	59.94p	20	—	—
[H.265/FHD/16M/60p]		1920×1080	59.94p	16	—	—
[H.265/FHD/12M/30p]		1920×1080	29.97p	12	—	—
[H.265/FHD/6M/30p]		1920×1080	29.97p	6	—	—
[H.264/4K/50M/60p]		3840×2160	59.94p	50	—	—
[H.264/4K/25M/60p]		3840×2160	59.94p	25	—	—
[H.264/4K/25M/30p]		3840×2160	29.97p	25	—	—
[H.264/4K/12.5M/30p]		3840×2160	29.97p	12.5	—
[H.264/FHD/16M/60p]		1920×1080	59.94p	16
[H.264/FHD/8M/60p]		1920×1080	59.94p	8
[H.264/FHD/6M/30p]		1920×1080	29.97p	6
[H.264/FHD/3M/30p]		1920×1080	29.97p	3
[H.264/HD/6M/60p]		1280×720	59.94p	6
[H.264/HD/4M/30p]		1280×720	29.97p	4

[System Frequency]: [50.00Hz (PAL)]
[Streaming Quality]	[Image Area of Video]	Resolution	(A)	(B)	[Connection Method]
[Streaming Quality]	FULL	Resolution	(A)	(B)	(C)	(D)	(E)
[H.265/4K/50M/50p]		3840×2160	50.00p	50	—	—
[H.265/4K/25M/50p]		3840×2160	50.00p	25	—	—
[H.265/4K/25M/25p]		3840×2160	25.00p	25	—	—
[H.265/4K/12.5M/25p]		3840×2160	25.00p	12.5	—	—
[H.265/FHD/20M/50p]		1920×1080	50.00p	20	—	—
[H.265/FHD/16M/50p]		1920×1080	50.00p	16	—	—
[H.265/FHD/12M/25p]		1920×1080	25.00p	12	—	—
[H.265/FHD/6M/25p]		1920×1080	25.00p	6	—	—
[H.264/4K/50M/50p]		3840×2160	50.00p	50	—	—
[H.264/4K/25M/50p]		3840×2160	50.00p	25	—	—
[H.264/4K/25M/25p]		3840×2160	25.00p	25	—	—
[H.264/4K/12.5M/25p]		3840×2160	25.00p	12.5	—
[H.264/FHD/16M/50p]		1920×1080	50.00p	16
[H.264/FHD/8M/50p]		1920×1080	50.00p	8
[H.264/FHD/6M/25p]		1920×1080	25.00p	6
[H.264/FHD/3M/25p]		1920×1080	25.00p	3
[H.264/HD/6M/50p]		1280×720	50.00p	6
[H.264/HD/4M/25p]		1280×720	25.00p	4

This can be set when the streaming destination is RTMP. (Cannot be set when it is RTMPS.)

icon_info_s

Set a streaming image quality (bit rate) appropriate to the communication speed of your internet connection.

Images output via HDMI are output with a resolution and frame rate that match [Streaming Quality].

However, when [Streaming Quality] is set to [HD], the output is in [FHD] resolution.