Support for 4K/120p (4K/100p) HDMI Output

icon_mode-photo_gray icon_mode-movie

icon_mode-ia icon_mode-p icon_mode-a icon_mode-s icon_mode-m icon_mode-creative-motion

[4K/120p Output] ([4K/100p Output]) Menu Has Been Added

When set to a recording quality of C4K/120p (100p) or 4K/120p (100p), video is output to an external device connected via HDMI as C4K/120p (100p) or 4K/120p (100p).

button_menu-set [] [ icon_setup-inout ] [HDMI Rec Output] Select [4K/120p Output] ([4K/100p Output])

[ON]

Output as C4K/120p (100p) or 4K/120p (100p) via HDMI.

If the external device is not compatible, output is FHD/60p or less.

While outputting as C4K/120p (100p) or 4K/120p (100p) via HDMI, video cannot be recorded to cards.

The YUV and bit value are output at 4:2:2 10-bit.

If the external device is not compatible, the output is at 4:2:0 10-bit.

[OFF]

Output as FHD/60p or less via HDMI.

icon_info_s

When the following function is being used, [4K/120p Output] ([4K/100p Output]) is not available:

– [HDMI RAW Data Output]

Power Save Live View Setting Has Been Added

When outputting C4K/120p (100p) or 4K/120p (100p) via HDMI, activation of the image sensor is limited during recording standby to reduce power consumption and keep the temperature from rising.

This can be set when [HDMI Recording Control] and [4K/120p Output] ([4K/100p Output]) are [ON].

button_menu-set [] [ icon_setup-inout ] [HDMI Rec Output] Select [4K/120p Power Save Live View] ([4K/100p Power Save Live View])

[ON]

Activation of the camera’s image sensor is limited to C4K/60p (50p) or 4K/60p (50p) during recording standby.

The limitation is canceled when recording is started by pressing either the video rec. button or shutter button on the camera.

The output destination device recognizes as C4K/120p (100p) or 4K/120p (100p), but if the recording is started on the external recorder during recording standby, recording is made with a limited image quality, so use the camera to perform the operations for starting and stopping video recording on the external recorder.

( character_reference Outputting Control Information to an External Recorder)

[OFF]

Output stays C4K/120p (100p) or 4K/120p (100p) via HDMI even during recording standby.

icon_info_s

The camera is released from the time code slave state when you use the [4K/120p Power Save Live View] ([4K/100p Power Save Live View]) function.

Changing Image Quality During HDMI Output

Due to the support for 4K/120p (4K/100p) HDMI output, the image quality when outputting via HDMI with the [Rec Quality] and [Down Convert] setting combinations will be as follows.

[System Frequency]: [59.94Hz (NTSC)]

[Down Convert]	[4K/120p Output]	Resolution and recording frame rate of the [Rec Quality]
		C4K/119.88p	4K/119.88p
[OFF]	[ON]	C4K/119.88p	4K/119.88p
	[OFF]	1080/59.94p	1080/59.94p

[System Frequency]: [50.00Hz (PAL)]

[Down Convert]	[4K/100p Output]	Resolution and recording frame rate of the [Rec Quality]
		C4K/100.00p	4K/100.00p
[OFF]	[ON]	C4K/100.00p	4K/100.00p
	[OFF]	1080/50.00p	1080/50.00p

[System Frequency]: [24.00Hz (CINEMA)]

[Down Convert]	[4K/120p Output]	Resolution and recording frame rate of the [Rec Quality]
		C4K/120.00p	4K/120.00p
[OFF]	[ON]	C4K/120.00p	4K/120.00p
	[OFF]	1080/24.00p	1080/24.00p

[Enlarged Live Display] Menu Changes

When [4K/120p Output] ([4K/100p Output]) is set to [ON] during HDMI output with C4K/120p (100p) or 4K/120p (100p), the [Enlarged Live Display] menu behaves as follows.

button_menu-set [] [ icon_setup-inout ] [HDMI Rec Output] Select [Enlarged Live Display]

[MODE1]

When the enlarged display of live view is used, the resolution and frame rate of the video is output via HDMI with C4K/120p (100p) or 4K/120p (100p), but the image refresh rate will be 30 fps or lower.

[MODE2]

[MODE2] is not available.

[OFF]

When the enlarged display of live view is used, the image refresh rate on the camera will be 30 fps or lower.