[System Frequency]

icon_mode-photo_gray icon_mode-movie

icon_mode-ia icon_mode-p icon_mode-a icon_mode-s icon_mode-m icon_mode-creative-motion

This changes the system frequency of videos that are recorded and played back with the camera.

The default setting is for the system frequency to be set to the TV broadcast system for the region where the camera was purchased.

button_menu-set [] [ icon_setup-others ] Select [System Frequency]

gui_system-frequency_eng

[59.94Hz (NTSC)]

System frequency for regions using the NTSC broadcasting system

[50.00Hz (PAL)]

System frequency for regions using the PAL broadcasting system

[24.00Hz (CINEMA)]

System frequency for producing cinema film

icon_info_s

After changing the setting, turn the camera off and on.

If you record using a system frequency that differs from the broadcasting system of your region, it may not be possible for you to properly play back videos on your TV.

We recommend using the setting as it was at the time of purchase if you are unsure about broadcasting systems or if you will not be involved in producing cinema film.

After changing the setting, it is recommended to insert another card and format it with this camera.

– Make the [System Frequency] setting the same for when you are recording and playing back.