[Show/Hide Photo Style]

[Vivid] / [Natural] / [L.ClassicNeo] / [Flat] / [Landscape] / [Portrait] / [L.Monochrome] / [L.Monochrome D] / [L.Monochrome S] / [Cinelike D2] / [Cinelike V2] / [Like709] / [V-Log] / [Hybrid Log Gamma] / [MY PHOTO STYLE 1] to [MY PHOTO STYLE 10]

Sets Photo Style items to be displayed on the menu.

[My Photo Style Settings]

[Add Effects]

[Load Preset Setting]

Enables detailed image quality adjustment settings for My Photo Style.

[Add Effects]: Enables [Sensitivity] and [White Balance] settings in image quality adjustment.

[Load Preset Setting]: Sets the timing at which image quality adjustment values changed in My Photo Style are returned to their registered state.

[Reset Photo Style]

Returns details changed in [Photo Style] and [Photo Style Settings] to their default settings.

[1/3 EV] / [1 EV]

Changes the intervals between ISO sensitivity adjustment values.

[ON] / [OFF]

Setting of ISO sensitivity to a minimum of [ISO50] is possible.

[Multi Metering]

[−1EV] to [+1EV] ([±0EV])

[Center Weighted]

[−1EV] to [+1EV] ([±0EV])

[Spot]

[−1EV] to [+1EV] ([±0EV])

[Highlight Weighted]

[−1EV] to [+1EV] ([±0EV])

Adjusts the exposure level that is the standard exposure for each setting item of [Metering Mode].

Adds the adjustment value from this function to the exposure compensation value (Exposure Compensation) when recording.

For video recording, it is not possible to add an adjustment value of a range that exceeds ±3 EV.

[ON] / [OFF]

When [Metering Mode] is set to [] (Multi-metering), the metering range for automatic exposure is prioritized on the face and eyes.

When set to [OFF], the change to exposure caused by the [FACE/EYE] automatic detection function can be avoided.

[sRGB] / [AdobeRGB]

This sets the method for correcting the color reproduction of the recorded images on the screens of a PC or on a device such as a printer.

[sRGB]: This is widely used in PCs and similar devices.

[AdobeRGB]: AdobeRGB is mainly used for business purposes such as professional printing because it has a greater range of reproducible colors than sRGB.

Set to [sRGB] if you are not very familiar with AdobeRGB.

When the following functions are being used, the setting is fixed to [sRGB]:

– Video recording

– [Like709]/[V-Log] ([Photo Style])

– [Filter Settings]

[ON] / [OFF]

This resets the exposure value when you change the recording mode or turn off the camera.

[ON] / [OFF]

Selects the setting method for aperture value, shutter speed, and ISO sensitivity when recording video in the [P]/[A]/[S]/[M] modes.

[ON]: Records with values set automatically by the camera.

[OFF]: Records with the values set in the [P]/[A]/[S]/[M] modes.

[F/SS/ISO/Exposure Comp.]

[] / []

[White Balance]

[] / []

[Photo Style]

[] / []

[Metering Mode]

[] / []

[AF Mode]

[] / []

Content set in [] mode can be separated from when taking pictures.

([CreativeVideo Combined Set.])

[AFS]

[FOCUS] / [BALANCE] / [RELEASE]

[AFC]

[FOCUS] / [BALANCE] / [RELEASE]

This sets whether to give priority to focus or shutter release during AF.

[FOCUS]: Disables recording when focus is not achieved.

[BALANCE]: Performs recording while controlling the balance between focusing and shutter release timing.

[RELEASE]: Enables recording even when focus is not achieved.

[ON] / [OFF]

This stores separate AF area positions (MF positions for MF Assist) for when the camera is held vertically and when it is held horizontally.

([Focus Switching for Vert / Hor])

[ON] / [OFF]

This sets button operations for AF/AE Lock.

Turning this [ON] maintains the lock after releasing the button until it is pressed again.

[ON] / [OFF]

When the focus mode is set to [AFS], you can fine-adjust the focus manually during AF Lock.

When the shutter button is pressed halfway

When [AF ON] is pressed

When locked using the Fn button [AF LOCK] or [AF/AE LOCK]

[Focus Ring]

(When an interchangeable lens with a focus ring is attached)

[ON] / [OFF]

[AF Mode]

[ON] / [OFF]

[Press Joystick]

[ON] / [OFF]

[MF Assist Display]

[FULL] / [PIP]

This sets the display method of MF Assist (enlarged screen).

[Focus Ring]: The screen is enlarged by focusing with the lens.

[AF Mode]: The screen is enlarged by pressing [].

[Press Joystick]: Press the joystick to enlarge the display. (if [Joystick Setting] is set to [D.FOCUS Movement]) ([Joystick Setting])

[MF Assist Display]: Sets the display method (full screen mode/windowed mode) of MF Assist (enlarged screen).

[] / [] / [OFF]

1. Default setting specifications vary depending on the country or area where the camera was purchased.

During MF, MF Guide, which acts as a guide to recording distance, is displayed on the screen. You can select from meters or feet for the display unit.

[ON] / [OFF]

This disables the focus ring operation during MF to lock the focus.

[MFL] is displayed on the recording screen while the focus ring is locked.

[Tracking]

[ON] / [OFF]

[Full Area AF]

[ON] / [OFF]

[Zone(Horizontal/Vertical)]

[ON] / [OFF]

[Zone]

[ON] / [OFF]

[1-Area+]

[ON] / [OFF]

[Pinpoint]

[ON] / [OFF]

Sets the AF mode items to be displayed on the AF mode selection screen.

[Pinpoint AF Time]

[LONG] / [MID] / [SHORT]

[Pinpoint AF Display]

[FULL] / [PIP]

Changes enlarged screen settings displayed when AF mode is [].

[Pinpoint AF Time]: Sets the time for which the screen is enlarged when the shutter button is pressed halfway.

[Pinpoint AF Display]: Sets the display method (full screen mode/windowed mode) of the enlarged screen.

[ON] / [OFF]

This adjusts focus automatically when you press the shutter button halfway.

[ON] / [OFF]

When set to [OFF], you can make the cross for eye/face detection disappear when focus is aligned by pressing the shutter button halfway, etc.

[ON] / [OFF]

You can release the shutter quickly by pressing the shutter button halfway.

[ON] / [OFF]

Use the shutter button for the start/stop operation of video recording in the [] mode.

The start/stop operation of video recording using the shutter button can be disabled when set to [OFF].

[ON] / [OFF]

When the amount of camera shake becomes small, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter button is pressed.

The battery will drain faster than usual.

This function is not available in the following cases:

– In preview mode

– In low light situations

[ON] / [OFF]

When looking through the viewfinder, if the eye sensor operates, then AF will function.

[Eye Sensor AF] may not work in low light situations.

[ON] / [OFF]

When moving the AF area, MF Assist, or video enlarged display of live view, this enables looping from one edge to the opposite edge of the screen.

[Keep Enlarged Display]

[ON] / [OFF]

[PIP Display]

[FULL] / [PIP]

Sets the operation of the function for enlarging the video live view ([Enlarged Live Display(Video)]).

[Keep Enlarged Display]

[ON]: Enlarges display after releasing the Fn button until the button is pressed again.

[OFF]: Enlarges display just while the Fn button is being pressed.

[PIP Display]

Sets the way the enlarged screen is displayed (full screen mode/windowed mode).

[Layout Style]

[MODE1] / [MODE2]

[Front Dial Assignment]

[Item] / [Value]

[Item Customize (Photo)]

[Item Customize (Video)]

Customizes the Quick menu.

(Quick Menu Customization)

[Touch Screen]

[ON] / [OFF]

[Touch Tab]

[ON] / [OFF]

[Touch AF]

[AF] / [AF+AE]

[Touch Pad AF]

[EXACT] / [OFFSET1] to [OFFSET7] / [OFF]

Enables touch operation on the monitor display.

[Touch Screen]: All touch operations.

[Touch Tab]: Operations of tabs, such as [] on the right side of the screen.

[Touch AF]: Operation to optimize the focus ([AF]) for a touched subject. Alternatively, operation to optimize both the focus and brightness ([AF+AE]). (Moving the AF Area by Touch)

[Touch Pad AF]: Touch pad operation during viewfinder display. (Moving the AF Area Position with the Touch Pad)

[AF ON] button

[] / []

Joystick

[] / []

[Q] button

[] / []

Cursor buttons / [MENU/SET] button

[] / []

Control dial

[] / []

[] (AF mode) button

[] / []

[] (Playback) button

[] / []

Touch screen

[] / []

[] (Cancel) button / [] (Delete) button / Fn button (Fn1)

[] / []

[DISP.] button

[] / []

[] (Exposure compensation) button

[] / []

[ISO] button

[] / []

[] (Audio information) button

[] / []

Rear dial

[] / []

Video rec. button

[] / []

Front dial

[] / []

[WB] button

[] / []

[LVF] button

[] / []

Shutter button

[] / []

Sub video rec. button

[] / []

Lens

[] / []

Enlarged live display (video) button / Fn button (Fn2)

[] / []

Preview button / Fn button (Fn3)

[] / []

Sets the operations to be disabled with the operation lock lever. (Only for recording screen)

The lock is applied or released each time you press .

Press [DISP.] to change the page.

The default settings are restored when you press [Q].

[] is displayed on the screen when you try to operate an operation part that is locked.

Operation parts locked by “Lens” depend on the lens. Lens switches are not locked.

Even if the lens is operated while “Lens” is locked, [] does not get displayed on the screen.

After locking with the “Lens” setting, test whether the lock is working by trying to operate the lens.

[Setting in REC mode]

[Setting in PLAY mode]

Registers a function to the Fn button.

(Register Functions to the Fn Buttons)

[WHILE PRESSING] / [AFTER PRESSING1] / [AFTER PRESSING2]

This sets the operation to be performed when [WB] (White balance), [ISO] (ISO sensitivity) or [] (Exposure compensation) is pressed.

[WHILE PRESSING]: Allows you to change the setting while pressing and holding the button. Release the button to confirm the settings value, and to return to the recording screen.

[AFTER PRESSING1]: Press the button to change settings. Press the button again to confirm the settings value, and to return to the recording screen.

[AFTER PRESSING2]: Press the button to change settings. Each press of the button switches the settings value. (Except that of exposure compensation) To confirm your selection and return to the recording screen, press the shutter button halfway.

[Front/Rear Dials]

[/] / [/] / [OFF/] /

[/] / [/OFF]

This sets the operations of the dials in the setting screen for ISO sensitivity.

Assigning [] lets you change [ISO Auto Upper Limit Setting].

[Cursor Buttons (Up/Down)]

[] / [OFF]

This sets the operations of the buttons in the exposure compensation screen.

Assigning [] lets you set exposure bracketing.

[Front/Rear Dials]

[/] / [/] / [OFF/] /

[/] / [/OFF]

This sets the operations of the dials in the exposure compensation screen.

Assigning [] lets you adjust flash output.

[Assign Dial (F/SS)]

[SET1] / [SET2] / [SET3] / [SET4] / [SET5]

Sets the operations to be assigned to the dials in [P]/[A]/[S]/[M] modes.

: Program Shift, F: Aperture value, SS: Shutter speed

[P]

[A]

[S]

[M]

[SET1]

F

SS

F

F

SS

SS

[SET2]

—

F

—

F

—

SS

SS

[SET3]

—

—

SS

SS

F

—

F

[SET4]

—

—

—

F

F

SS

SS

[SET5]

F

SS

F

—

—

—

SS

[Rotation (F/SS)]

[] / []

Changes the rotational directions of the dials for aperture value and shutter speed adjustment.

[Control Dial Assignment]

[] ([Headphone Volume]) /

[/] ([Exposure / Aperture]) /

[] ([Exposure Comp.]) /

[] ([Sensitivity]) /

[] ([Focus Frame Size])

Sets the function to be assigned to on the recording screen.

[/]: In [M] mode, this assigns the operation to adjust the aperture value. In other than [M] mode, this assigns the operation of exposure compensation.

[Exposure Comp.]

[] / [] / [OFF]

Assigns exposure compensation to or . (Except in [M] mode)

The [Assign Dial (F/SS)] setting takes priority.

[Dial Operation Switch Setup]

[]

[]

In the Fn button [Dial Operation Switch], this sets the functions to be registerd temporarily to or . (Register Functions to the Dials)

[Rotation (Menu Operation)]

[] / [] / [] / []

Changes the rotational direction of the dials when operating menus.

[D.FOCUS Movement] / [Fn] / [MENU] / [OFF]

Sets the joystick movement on the recording screen.

[D.FOCUS Movement]: Moves the AF area and MF Assist. (AF Area Movement Operation, Record Using MF)

[Fn]: Operates as Fn buttons.

[MENU]: Operates as . Operations that can be performed by moving the joystick are disabled.

[OFF]: Disables the joystick.

You can register a favorite function to the video rec. button on a Shutter Remote Control (optional).

(Shutter Remote Control (Optional))

[Video Record] is registered in the default setting.

[Duration Time (photo)]

[HOLD] / [5SEC] to [0.5SEC] / [OFF]

[Playback Operation Priority]

[ON] / [OFF]

This displays an image immediately after it is recorded.

[Duration Time (photo)]: Sets the Auto Review when taking pictures.

[Playback Operation Priority]: When this is set to [ON], you can toggle the playback screen during Auto Review, or delete pictures.

If you set [Duration Time (photo)] to [HOLD], the image recorded stays displayed until the shutter button is pressed halfway.

[Playback Operation Priority] will be fixed to [ON].

When the following function is being used, [Auto Review] is not available:

– SH burst recording

[ON] / [OFF]

[SET]

[Effect]

[Preview While MF Assist]

You can always confirm the effects of aperture on the recording screen when in [A]/[M] mode.

You can also confirm the shutter speed at the same time when in [M] mode.

You can set the combination of the aperture effect and the shutter speed effect in [Effect].

Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON].

The preview of the shutter speed effect does not work when using a flash.

[ON] / [OFF]

This displays the histogram.

Turning this [ON] displays the histogram transition screen.

Press to set the position.

Positions can be moved to the diagonal directions using the joystick.

You can also move the position by dragging the histogram on the recording screen.

A histogram is a graph that displays brightness along the horizontal axis, and the number of pixels at each brightness level on the vertical axis.

By looking at the distribution of the graph, you can determine the current exposure.

(A) Dark

(B) Bright

When the recorded image and the histogram do not match each other under the following conditions, the histogram is displayed in orange:

– During exposure compensation

– When the flash fires

– When the standard exposure is not achieved, such as in low light situations.

When the following function is being used, the [Histogram] is not available:

– [WFM/Vector Scope]

The histogram is an approximation in the recording mode.

[] / [] / [] / [OFF]

Sets the grid line pattern to be displayed on the recording screen.

When using [], you can press to set the position.

Positions can be moved to the diagonal directions using the joystick.

When using [], you can also drag [] on the grid lines on the recording screen to move the position.

[MODE1] / [MODE2] / [OFF]

[SET]

[P/A/S/M] / [M]

Displays the screen brighter to make it easier to check subjects and compositions even in low-light environment.

[MODE1]: Setting for low brightness, with priority given to a soft display.

[MODE2]: Setting for high brightness, with priority given to image visibility.

You can change the recording mode in which [Live View Boost] works by using [SET].

This mode does not affect recorded images.

Noise may be more noticeable in the screen than in the recorded image.

This function does not work in the following cases:

– When adjusting the exposure (when the shutter button is pressed halfway, for example)

– When recording a video

– When using [Filter Settings]

– When displaying the shutter speed effect of [Constant Preview]

[Monitor]

[ON] / [OFF]

[LVF]

[ON] / [OFF]

Displays the monitor and viewfinder in red.

In dark environments, this reduces brightness of the screen that can make the surroundings difficult to see.

You can also set the luminance of the red display.

1. Press to select [ON] on the monitor or viewfinder (LVF).

2. Press [DISP.] to display the brightness adjustment screen.

Display the monitor to adjust the monitor, and display the viewfinder to adjust the viewfinder.

3. Press to adjust luminance and then press or .

This effect is not applied to images output via HDMI.

[LVF Disp. Set]

[] / []

[Monitor Disp. Set]

[] / []

Selects whether to show the live view without covering the information display, or to display over the entire screen.

[]: Scales down images slightly so you can better review the composition of the images.

[]: Scales images to fill the entire screen so you can see their details.

You can assign the function that switches the currently displayed monitor or viewfinder display style to an Fn button. ([LVF/Monitor Disp. Set])

[Horizontal Image Flip(Monitor)]

[AUTO] / [ON] / [OFF]

[Vertical Image Flip(Monitor)]

[AUTO] / [ON] / [OFF]

You can set whether the screen flips or not depending on the facing or angle of the monitor during recording.

[Horizontal Image Flip(Monitor)]

[AUTO]: The screen automatically flips horizontally according to the angle to which the monitor is opened or closed.

[ON]: The screen is flipped horizontally all the time.

[OFF]: Screen is not flipped.

[Vertical Image Flip(Monitor)]

[AUTO]: The screen automatically flips vertically according to the angle to which the monitor is rotated.

[ON]: The screen is flipped vertically all the time.

[OFF]: Screen is not flipped.

The settings for this function are not reflected in the playback screen.

[ON] / [OFF]

This displays the exposure meter.

Set to [ON] to display the exposure meter when performing Program Shift, setting aperture, and setting shutter speed.

If no operations are performed for a certain period of time, the exposure meter disappears.

[ON] / [OFF]

Displays the focal length on the recording screen during zoom control.

[ON] / [OFF]

Overexposed areas appear blinking in black and white during Auto Review or playback.

The display without the highlights is added to the display shown when [DISP.] is pressed in the playback screen.

Use this to delete the highlight display. (Playback Screen)

[ON] / [OFF]

[SET]

[Transparency]

[Image Select]

[Reset at Power Off]

[Disp. Image (shutter-press)]

Displays recorded pictures by overlapping on the recording screen.

Use [Image Select] to select the pictures to be displayed.

Press to select pictures and then press or to confirm.

If you set [Disp. Image (shutter-press)] to [OFF], [Sheer Overlay] is canceled while the shutter button is being pressed halfway or pressed fully.

When the following function is being used, [Sheer Overlay] is not available:

– Video recording

[ON] / [OFF]

Displays a reference point (C) on the recording screen in order to let you check for camera shake.

[I.S. Status Scope] does not work in the following cases:

– When [Operation Mode] in [Image Stabilizer] is set to [OFF]

– When the O.I.S. switch on the lens is [OFF]

When the following functions are being used, [I.S. Status Scope] is not available:

– Video recording

– High Resolution mode (when [Handheld High-Res] is set to [OFF])

[ON] / [OFF]

Displays the level gauge which is useful in correcting camera tilt.

(D) Horizontal

(E) Vertical

(F) Green (no tilt)

Even after correcting the tilt, there may still be an error of approx. ±1.

When the camera is tilted significantly upwards or downwards, the level gauge may not be displayed correctly.

You can adjust the level gauge and reset the adjusted values in [Level Gauge Adjust.] in the [Setup] ([Monitor / Display]) menu. ([Level Gauge Adjust.])

[ON] / [OFF]

Specify any spot on the subject to measure the luminance over a small area.

([Luminance Spot Meter])

[ON] / [OFF]

Displays the outline for the live view.

[Control Panel]

[ON] / [OFF]

[Black Screen]

[ON] / [OFF]

Displays the control panel and black screen when switching between displays using [DISP.] button. (Recording Screen)

[Read LUT File]

[LUT Select]

[LUT View Assist (Monitor)]

[ON] / [OFF]

[LUT View Assist (HDMI)]

[ON] / [OFF]

You can show images with LUT data applied on the monitor/viewfinder, or output them via HDMI.

([V-Log View Assist])

[Monitor]

[MODE1] / [MODE2] / [OFF]

[HDMI]

[AUTO] / [MODE1] / [MODE2] / [OFF]

At recording or playback of HLG video, this displays images with converted color gamut and brightness on the camera monitor/viewfinder, or outputs these over HDMI.

([HLG View Assist])

[] / [] / [] / [] / [] / [OFF]

This displays the desqueezed images suited to the magnification of the anamorphic lens on this camera.

([Anamorphic Desqueeze Display])

[ON] / [OFF]

You can display the recording screen in black and white.

If you use the HDMI output during recording, the output image will not be displayed in black and white.

[Monochrome Live View] is not available when [Night Mode] is used.

[] / [] / [] / [] / [OFF]

The center of the recording screen will be displayed as [+].

The shape of the marker can be changed.

[] / [] / [OFF]

[SET]

[Size]

[95%]

[90%]

[80%]

This displays the safety zone, which shows a guide to the area that would be shown on a household TV, on the recording screen.

[ON] / [OFF]

[SET]

[Frame Aspect]

[Frame Color]

[Frame Mask]

A frame with the set aspect ratio is displayed on the recording screen.

[Frame Aspect] can also be customized.

([Frame Marker])

[ZEBRA1] / [ZEBRA2] / [ZEBRA1+2] / [OFF]

[SET]

[Zebra 1]

[Zebra 2]

Parts that are brighter than the base value are displayed with stripes.

([Zebra Pattern])

[WAVE] / [VECTOR] / [OFF]

This displays the waveform monitor or the vector scope on the recording screen.

([WFM/Vector Scope])

[SMPTE] / [EBU] / [ARIB]

The color bars are displayed on the recording screen.

(Color Bars/Test Tone)

[ON] / [OFF]

When in [iA]/[P]/[A]/[S]/[M] modes, switch the recording screen display and the control panel to suit video recording, as with the [] mode.

The playback screen also switches to a display that prioritizes video.

When set to a setting where video recording is not available, [Video-Priority Display] is fixed to [OFF].

[Video-Priority Display] works only during video recording when using the following functions:

– [Time Lapse Shot]

– [Stop Motion Animation]

[ON] / [OFF]

A red frame is displayed on the recording screen that indicates that video is being recorded.

[Info Display] (Outputting the Camera Information Display via HDMI)

[ON] / [OFF]

[Down Convert] (HDMI Output Image Quality)

[AUTO] / [C4K/4K] / [1080p] / [1080i] / [OFF]

[HDMI Recording Control] (Outputting Control Information to an External Recorder)

[ON] / [OFF]

[Sound Output (HDMI)] (Outputting Audio via HDMI)

[ON] / [OFF]

[Enlarged Live Display] (Outputting the Enlarged Live Display (Video) via HDMI)

[MODE1] / [MODE2] / [OFF]

Sets HDMI output during recording.

[AUTO1] / [AUTO2] / [FAST] / [NORMAL] / [SLOW] / [OFF]

Sets fan operation.

[AUTO1]: The camera switches [SLOW]/[NORMAL] automatically according to the temperature of the camera. This setting prioritizes controlling rises in temperature in the camera.

[AUTO2]: The camera switches [OFF]/[SLOW]/[NORMAL] automatically according to the temperature of the camera.

[FAST]: The fan operates constantly at fast speed.

[NORMAL]: The fan operates constantly at a standard speed.

[SLOW]: The fan operates constantly at low speed.

[OFF]: The fan does not operate.

[OFF] can be set when in [iA]/[P]/[A]/[S]/[M] mode.

When the following functions are being used, [SLOW] is not available.

When the following functions are used while set to [SLOW], the setting switches to [AUTO1]:

– [Rec Quality] exceeding a resolution of C4K

– [Rec Quality] with a high frame rate video exceeding a recording frame rate of 60.00p

– [Variable Frame Rate] exceeding a frame rate of 60 fps

[Front Tally Lamp]

[H] / [L] / [OFF]

[Rear Tally Lamp]

[H] / [L] / [OFF]

Sets how the tally lamps turn on while recording video and their brightness.

[ON] / [OFF]

The camera saves the focus position when you turn it off.

When using an interchangeable lens compatible with power zoom, the zoom position is also saved.

[Step Zoom]

[ON] / [OFF]

[Zoom Speed]

[Photo]: [H] / [M] / [L]

[Video]: [H] / [M] / [L]

[Zoom Ring]

[ON] / [OFF]

This sets the zoom operation when using a lens that supports power zoom (motorized zoom).

([Power Zoom Lens])

[Focus Stop] / [AF Mode] / [AF Detection Setting] / [Detecting Subject] / [Focus Ring Lock] / [AE LOCK] / [AF LOCK] / [AF/AE LOCK] / [AF-ON] / [AF-ON : Near Shift] / [AF-ON : Far Shift] / [Focus Area Set] / [Enlarged Live Display(Video)] / [Image Stabilizer] / [Preview] / [Preview Aperture Effect] / [No Setting] / [Off (Disable Press and Hold)] / [Restore to Default]

Register a function to the focus button of an interchangeable lens.

When [Focus Stop] is set, focus is fixed while the focus button is being pressed.

[SMOOTH] / [1/3EV]

Stops for setting the aperture value with the aperture ring can be changed.

[SMOOTH]: You can finely adjust the aperture value.

[1/3EV]: You can set the aperture value at 1/3 EV stops.

This can be used when a lens compatible with a clickless aperture ring (H-X1025/H-X2550: optional) is attached. (As of January 2022)

When taking pictures, this setting will take effect if the aperture ring is set to a position other than [A].

If the position of the aperture ring is set to [A], the aperture value set by the camera will take effect and can be adjusted like with [1/3EV].

During video recording, fine adjustments can be made like with [SMOOTH].

When [SMOOTH] is set, fractions of aperture values are not displayed on the screen.

[NON-LINEAR] / [LINEAR]

[SET]

[90°] to [1080°] ([300°]) / [Maximum]

Sets the amount of movement for focusing using the focus ring. (When using supported lenses)

[NON-LINEAR]: Focus responds by accelerating according to rotation speed of the focus ring.

[LINEAR]: Focus responds at a constant amount according to the rotational angle of the focus ring.

When using lenses equipped with focus clutch mechanisms, set the lens to AF and the camera to MF.

[SET]: Sets the rotational angle of the focus ring for when [LINEAR] is selected.

Angles that cannot be set with the attached lens are not displayed.

For information on lenses that support focus ring control, refer to the following support site:

https://panasonic.jp/support/global/cs/dsc/connect/index.html

(English only)

[Lens1] to [Lens12] ([Lens1])

When using a lens that does not have a communication function with the camera, register the lens information in the camera.

This is linked with [Lens Information] in [Image Stabilizer] under the [Photo] ([Others (Photo)]) menu. ([Lens Information])

[ON] / [OFF]

When you have attached a lens that does not have a communication function with this camera, a message asking for confirmation of the lens information is displayed when you turn on the camera.

[ON] / [OFF]

You can set whether or not to record the camera’s vertical orientation information during video recording.

[ON]: Records vertical orientation information. Videos recorded with the camera held vertically will be automatically played back vertically on the PC, smartphone, etc. during playback.

[OFF]: Does not record vertical orientation information.

On the playback screen of the camera, only the thumbnail display is played in vertical orientation.