Panasonic

Exposure Compensation

character_bullet-large[Vignetting Comp.]

character_bullet-large[Diffraction Compensation]


icon_mode-photoicon_mode-movie

icon_mode-iaicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motion

You can compensate the exposure when the standard exposure determined by the camera is too bright or too dark.

You can adjust the exposure in 1/3 EV steps in a range of ±5 EV.

When recording videos, the range changes to ±3 EV.


  1. Press [icon_expo].

image_button-exposure

  1. Compensate the exposure.

character_bullet-largeRotate image_front-dial_s, image_rear-dial_s, or button_control-dial_s.

button_exp-comp1

gui_exposure0

  1. Confirm your selection.

character_bullet-largePress the shutter button halfway.


icon_info_s

bullet02In [M] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO].

bullet02When the exposure compensation value falls below or exceeds ±3 EV, the brightness of the recording screen will no longer change.

Press the shutter button halfway or use AE Lock to reflect the value on the recording screen.

bullet02The set exposure compensation value is stored even if you turn off the camera.

icon_related-info_s

bullet02The standard value for standard exposure can be adjusted:

(character_reference[Exposure Offset Adjust.])

bullet02You can set the exposure compensation value to be reset when the camera is turned off:

(character_reference[Exposure Comp. Reset])

bullet02You can change the operation of the [icon_expo_s] button:

(character_reference[WB/ISO/Expo. Button])

bullet02Exposure Bracket can be set and flash output can be adjusted on the exposure compensation screen:

(character_reference[Exposure Comp. Disp. Setting])

bullet02You can assign the function that matches the aperture value and shutter speed to the standard exposure to an Fn button:

(character_reference[One Push AE])


[Vignetting Comp.]

icon_mode-photoicon_mode-movie

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motion

When the screen periphery darkens as a result of the lens characteristics, you can record pictures with the brightness of the screen periphery corrected.


button_menu-set character_arrow [icon_picture]/[icon_movie] character_arrow [icon_photo-quality] character_arrow Select [Vignetting Comp.]


Settings: [ON]/[OFF]


icon_info_s

bullet02Compensation effect may not be achieved depending on the recording conditions.

bullet02Noise in the periphery of the picture may stand out with higher ISO sensitivity.

bullet02When the following function is being used, [Vignetting Comp.] in the [Photo] ([Image Quality]) menu is not available:

– [Ex. Tele Conv.]

bullet02When the following functions are being used, [Vignetting Comp.] in the [Video] ([Image Quality]) menu is not available:

– [PIXEL/PIXEL] ([Image Area of Video])

– [Variable Frame Rate]


[Diffraction Compensation]

icon_mode-photoicon_mode-movie

icon_mode-ia_grayicon_mode-picon_mode-aicon_mode-sicon_mode-micon_mode-creative-motion

The camera raises the image resolution by correcting the blurriness caused by diffraction when the aperture is closed.


button_menu-set character_arrow [icon_picture]/[icon_movie] character_arrow [icon_photo-quality] character_arrow Select [Diffraction Compensation]


Settings: [AUTO]/[OFF]


icon_info_s

bullet02Compensation effect may not be achieved depending on the recording conditions.

bullet02Noise may stand out with higher ISO sensitivity.