Sending Images from the Camera
Operate the camera to send recorded images to a device connected by Wi-Fi.
Refer to the following pages for the steps common to all devices.
Wi-Fi connections: [Via Network] (
[Via Network])/[Direct] (
[Direct])
Image send settings (
Image Send Settings)
Selecting images (
Selecting Images)
|
Images That Can be Sent
Images that can be sent differ depending on the destination device.
Destination device |
Images that can be sent |
|
[Send Images to PC While Recording] |
[Send Images Stored in the Camera] |
|
[PC] ( |
JPEG/RAW |
JPEG/RAW/MP4/MOV/Apple ProRes |
[Printer] ( |
— |
JPEG |
|
Fn Button Assigned with [Wi-Fi]
You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. (Fn Buttons)
[Terminate the Connection]
Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to select a different Wi-Fi connection.
[Change Settings for Sending Images]
Sets the image size, file format, and other items for sending recorded images. (Image Send Settings)
[Register the Current Destination to Favorite]
Registers the current connection destination or method so that you can easily connect with the same connection settings next time.
[Network Address]
Displays the MAC address and IP address of the camera. ([Network Address])
Depending on the Wi-Fi function being used or the connection destination, you may not be able to perform some of these operations.
[PC]
Send recorded images to the PC connected with Wi-Fi.
Supported OS Windows: Windows 10 Mac: macOS 10.13, 10.14, 10.15.3 to 10.15.7, 11.0 to 11.4 |
Getting started:
Turn on the PC.
Create a destination folder for images.
If the workgroup of the destination PC has been changed from the standard setting, change the corresponding setting of the camera in [PC Connection]. (
[PC Connection])
Create a Destination Folder for Images
When using Windows (Example for Windows 10)
-
Select the destination folder and then right-click.
-
Select [Properties] and then enable folder sharing.
When using Mac (Example for macOS 10.14)
-
Select the destination folder and then click the items in the following order.
[File] [Get Info]
-
Enable folder sharing.
A destination folder may not be created if the account name includes non-alphanumeric characters.
In that case, we recommend changing the name to one consisting only of 15 or less alphanumeric characters.
|
-
Select the method for sending images on the camera.
[
]
[
]
[Wi-Fi]
[Wi-Fi Function]
[New Connection]
[Send Images to PC While Recording]/[Send Images Stored in the Camera]
-
(When [Send Images Stored in the Camera] is selected) Set the destination to [PC].
-
Connect the camera and PC by Wi-Fi.
Select [Via Network] (
[Via Network]) or [Direct] (
[Direct]), and then connect.
-
Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name).
How to enter characters (
Entering Characters)
-
Select a folder for storing images.
Folders sorted by sent date will be created in the selected folder, and images will be saved there.
-
Check the send settings and then press
or
.
To change the send setting, press [DISP.]. (
Image Send Settings)
-
(When [Send Images to PC While Recording] is selected) Take pictures.
[
] is displayed in the recording screen of the camera while a file is being sent.
To end the connection, follow the steps below:
[
]
[
]
[Wi-Fi]
[Wi-Fi Function]
[Yes]
(When [Send Images Stored in the Camera] is selected) Select an image.
To end the connection, select [Exit].
|
[Printer]
You can send images to a PictBridge (wireless LAN)-supported printer connected by Wi-Fi for printing.
-
DPS over IP standard-compliant
-
Select the method for sending images on the camera.
[
]
[
]
[Wi-Fi]
[Wi-Fi Function]
[New Connection]
[Send Images Stored in the Camera]
-
Set the destination to [Printer].
-
Connect the camera to a printer by Wi-Fi.
Select [Via Network] (
[Via Network]) or [Direct] (
[Direct]), and then connect.
-
Select the destination printer.
-
Select and print images.
The procedure for selecting images is the same as the one for when the USB connection cable is connected. (
Printing)
To terminate the connection, press [
].
|