Panasonic

[Synchro Scan]

icon_mode-photo_grayicon_mode-movie

icon_mode-ia_grayicon_mode-p_grayicon_mode-a_grayicon_mode-s_grayicon_mode-m_grayicon_mode-creative-motion

Fine-adjust the shutter speed to reduce flickering and horizontal stripes.

The shutter speed set in Synchro Scan is saved separately from the shutter speed used for normal recording.

In the Synchro Scan setting screen you can call up the current shutter speed for normal recording and adjust it.


  1. Set the recording mode to [icon_mode-p-motion_table].

character_bullet-largeSet the mode dial. (character_referenceSelecting the Recording Mode)

  1. Set the exposure mode to [S] or [M].

character_bullet-largebutton_menu-set character_arrow [icon_movie] character_arrow [icon_photo-quality] character_arrow [Exposure Mode] character_arrow [S]/[M]

  1. Set [Synchro Scan].

character_bullet-largebutton_menu-set character_arrow [icon_movie] character_arrow [icon_photo-quality] character_arrow [Synchro Scan] character_arrow [ON]

gui_synchro-scan2_eng

  1. Set the shutter speed.

character_bullet-largeRotate image_front-dial_s, image_rear-dial_s or button_control-dial_s to select a numeric value, then press button_menu-set or button_joy-stick-push_s.


bullet02You can call up the current shutter speed for normal recording by pressing [DISP.].

bullet02Adjust the shutter speed while looking at the screen so that flickering and horizontal stripes will be minimized.

gui_synchro-scan1_eng


icon_info_s

bullet02When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.