[Wi-Fi Setup] Menu

This configures the settings required for the Wi-Fi function.

The settings cannot be changed when connected to Wi-Fi.

Displaying the [Wi-Fi Setup] menu.

button_menu-set [] [ icon_setup-inout ] [Wi-Fi] [Wi-Fi Setup]

gui_wi-fi_setting_eng

[Priority of Remote Device]

This sets either the camera or the smartphone as the priority control device to be used during remote recording. ( character_reference Operation Method During Remote Recording)

[Wi-Fi Password]

You can use a password to connect for enhanced security. ( character_reference Using Password Authentication to Connect)

[PC Connection]

You can set the workgroup.

To send images to a PC, you need to connect to the same workgroup as the destination PC.

(The default setting is “WORKGROUP”.)

To change the workgroup name, press button_menu-set or button_joy-stick-push_s and enter the new workgroup name.

How to enter characters ( character_reference Entering Characters)

To return to the default settings, press [DISP.].

[Device Name/Password]

You can change the camera name (SSID) and password.

Press [DISP.] to change the device name and password.

How to enter characters ( character_reference Entering Characters)

Enter up to 32 characters for the device name and 63 characters for the password.

[Wi-Fi Function Lock]

To prevent incorrect operation and use of the Wi-Fi function by a third party and to protect personal information in the camera and included with images, protect the Wi-Fi function with a password.

[Setup]: Enter any 4-digit numbers as the password.

How to enter characters ( character_reference Entering Characters)

[Cancel]: Cancel the password.

Once a password is set, you are required to enter it each time you use the Wi-Fi function.

If you forget your password, you can use [Reset] in the [Setup] ([Setting]) menu to reset the network settings and thereby reset the password.

[Network Address]

Displays the MAC address and IP address of the camera.