Panasonic

Note regarding simultaneous output to the SDI OUT terminal and the HDMI terminal [X2]

It is possible to output from both the <SDI OUT> terminal and the <HDMI> terminal to the external device at the same time.

The formats that can be output differ depending on the following setting combinations.

bullet02[SYSTEM] menu character_arrow [FREQUENCY]

bullet02[SYSTEM] menu character_arrow [FILE FORMAT]

bullet02[SYSTEM] menu character_arrow [REC FORMAT]

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI OUT FORMAT]

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [HDMI OUT FORMAT]


Make the following menu setting:

bullet02[VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI + HDMI OUTPUT] character_arrow [ON]


character_diamondWhen the [FREQUENCY] is set to [59.94Hz]

[REC FORMAT]

<HDMI> terminal

<SDI OUT> terminal

Resolution/frame rate

[HDMI OUT FORMAT]: output format

[SDI OUT FORMAT]: output format

3840×2160/59.94p

[3840×2160p]: 3840×2160/59.94p 4:2:2 10 bit

[3840×2160p(420/8bit)]: 3840×2160/59.94p 4:2:0 8 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

3840×2160/29.97p

[3840×2160p]: 3840×2160/29.97p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/29.97PsF 4:2:2 10 bit

3840×2160/23.98p

[3840×2160p]: 3840×2160/23.98p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/23.98PsF 4:2:2 10 bit

1920×1080/59.94p

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/59.94p 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

1920×1080/59.94i

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

[1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit

1920×1080/29.97p

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/29.97PsF 4:2:2 10 bit

1920×1080/23.98p

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080p]: 1920×1080/23.98p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/23.98PsF 4:2:2 10 bit

1280×720/59.94p

[1280×720p]: 1280×720/59.94p 4:2:2 10 bit

[1280×720p]: 1280×720/59.94p 4:2:2 10 bit


character_diamondWhen the [FREQUENCY] is set to [50.00Hz]

[REC FORMAT]

<HDMI> terminal

<SDI OUT> terminal

Resolution/frame rate

[HDMI OUT FORMAT]: output format

[SDI OUT FORMAT]: output format

3840×2160/50.00p

[3840×2160p]: 3840×2160/50.00p 4:2:2 10 bit

[3840×2160p(420/8bit)]: 3840×2160/50.00p 4:2:0 8 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

3840×2160/25.00p

[3840×2160p]: 3840×2160/25.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/25.00PsF 4:2:2 10 bit

1920×1080/50.00p

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080p]character_asterisk: 1920×1080/50.00p 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

1920×1080/50.00i

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

[1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit

1920×1080/25.00p

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit

[1920×1080PsF]character_asterisk: 1920×1080/25.00PsF 4:2:2 10 bit

1280×720/50.00p

[1280×720p]: 1280×720/50.00p 4:2:2 10 bit

[1280×720p]: 1280×720/50.00p 4:2:2 10 bit

  1. Factory setting


bullet02There are the following limitations if [SDI + HDMI OUTPUT] is [ON]:

– [HDMI OUT FORMAT] cannot be set to [720×480p]/[720×576p].

– [SDI OUT FORMAT]/[HDMI OUT FORMAT] will have the same frame rate settings.

(Example) When [HDMI OUT FORMAT]/[SDI OUT FORMAT] is set to [1920×1080p]

If [HDMI OUT FORMAT] is set to [1920×1080i], then [SDI OUT FORMAT] will also be automatically set to [1920×1080i].

– Either one of the LCD monitor or the viewfinder only illuminates.


character_diamondTo set how to turn on/off the LCD monitor and viewfinder

Sets the display method of the LCD monitor/viewfinder when [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [SDI + HDMI OUTPUT] character_arrow [ON].

  1. Select [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [LCD/VF OUTPUT] character_arrow [AUTO] or [LCD].


[AUTO]:

The LCD monitor is turned on when the LCD monitor is extracted. When you move your eye closer to the eye cup of the viewfinder, the viewfinder is turned on.


[LCD]:

The LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is not turned on.



To change the setting with a USER button

You can change how to turn on/off the LCD monitor and Viewfinder by registering [LCD/VF OUTPUT] to a USER button.

bullet02For details about setting the USER button (character_referenceAssigning functions to the USER buttons)


  1. When the recording screen is displayed, press the USER button to which [LCD/VF OUTPUT] is registered.

Switches the setting each time the button is pressed.

[AUTO] icon_arrow-long2 [LCD]

bullet02The setting is also applied to the [VIDEO OUT/LCD/VF] menu character_arrow [VIDEO OUT SEL] character_arrow [LCD/VF OUTPUT] menu setting.