Item (USER button icon display)

Description

[INHIBIT]

([INHIBIT])

Disables assignment of functions.

[AWB]

([AWB])

Assigns the automatic white balance function.

[DRS]

([DRS])

Assigns the dynamic range stretcher function.

[FBC]

([FBC])

Switches enable/disable of the flash band compensation function.

[PUSH AUTO]

([PUSH AUTO])

Assigns the one-push auto focus function.

The same is performed when the <PUSH AUTO> button is pressed.

[S.GAIN]

([S.GAIN])

Assigns the function that switches to super gain.

[AREA]

([AREA])

Assigns the area function.

[AF AREA]

([AF AREA])

Assigns the AF area width adjustment function.

[ATW]

([ATW])

Switches enable/disable of the auto tracking white balance function.

[ATW LOCK]

([ATW LOCK])

Fixes the value of the white balance. Press the USER button again or touch the USER button icon to resume the operation of the auto tracking white balance.

Enabled when the auto tracking white balance is operating.

[SPOTLIGHT]

([SPOTLIGHT])

Switches enable/disable of the auto iris control function for the spot light.

[BACKLIGHT]

([BACKLIGHT])

Switches enable/disable of the auto iris control function for the backlight compensation.

[AE LEVEL]

([AE LEVEL])

Switches enable/disable of the AE level function.

[Y GET]

([Y GET])

Assigns the function that displays the luminance level of the frame area displayed near the center.

[FOCUS MACRO]

([FOCUS MACRO])

Switches the focus macro setting.

[O.I.S.]

([O.I.S.])

Switches enable/disable of the optical image stabilizer function.

[O.I.S. MODE]

([O.I.S. MODE])

Switches the operation mode of the optical image stabilizer function. Each time you either press the USER button or touch the USER button icon, the operation mode switches in the order [NORMAL], [PAN/TILT], [STABLE]

[i.ZOOM]

([i.ZOOM])

Assigns the zoom function to minimize image distortion.

[D.ZOOM]

([D.ZOOM])

Switches enable/disable of digital zoom. Zooms in on the field angle by 2×, 5×, and 10× vertically and horizontally each time the USER button is pressed or the USER button icon is touched.

[IR REC]

([IR REC])

Switches enable/disable of IR recording.

[FAST ZOOM]

([FAST ZOOM])

Speeds up the zoom speed when the zoom lever is pushed in all the way.

[ADAPTIVE MATRIX]

([ADAPTIVE MATRIX])

Enables/disables the function to control the linear matrix in accordance with the shooting condition.

[REC SW]

([REC SW])

Assigns the same functions as the REC buttons.

[PRE REC]

([PRE REC])

Switches enable/disable of pre-recording.

[VFR]

([VFR])

Enables/disables the variable frame rate recording function.

[SUPER SLOW]

([SUPER SLOW])

Switches enable/disable of the super slow recording function.

[BACKGR PAUSE]

([BACKGR PAUSE])

Assigns the function that stops the background recording of card slot 2.

Press and hold the USER button to which [BACKGR PAUSE] is assigned for approximately 5 seconds or touch and hold the USER button icon for approximately 5 seconds and release to stop background recording.

[REC CHECK]

([REC CHECK])

Automatically plays back the last approximately 3 seconds of the previously shot clip.

[DEL LAST CLIP]

([DEL LAST CLIP])

Deletes the clip last shot.

[SLOT SEL]

([SLOT SEL])

Selects the card slot for recording.

Or, switches the card slot for the clip to display in the thumbnail screen.

[AUDIO CH1 LEVEL]

([AUDIO CH1 LEVEL])

Switches the recording level adjustment method for audio channel 1 between automatic and manual.

[AUDIO CH2 LEVEL]

([AUDIO CH2 LEVEL])

Switches the recording level adjustment method for audio channel 2 between automatic and manual.

[FOCUS ASSIST]

([FOCUS ASSIST])

Switches enable/disable of the focus assist function.

[WFM]

([WFM])

Switches the display of the waveform monitor. The waveform display is selected in the [VIDEO OUT/LCD/VF] menu [EI ASSIST] [WFM MODE].

[ZEBRA]

([ZEBRA])

Switches display/hide of zebra patterns.

[LEVEL GAUGE]

([LEVEL GAUGE])

Switches display/hide of the level gauge.

[LEVEL GAUGE SET]

([LEVEL GAUGE SET])

Sets the current horizontal and vertical direction as the reference value of the level gauge.

[LCD/VF OUTPUT]

([LCD/VF OUTPUT])

Switches the display method of the LCD monitor/viewfinder when [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [SDI + HDMI OUTPUT] [ON].

[LCD/VF HDR]

([LCD/VF HDR])

Toggles output images from the LCD monitor and viewfinder between the high dynamic range and standard dynamic range.

[LCD/VF V-Log]

([LCD/VF V-Log])

Toggles output images from the LCD monitor and viewfinder between V-Log and V-709.

[VF ON/OFF]

([VF ON/OFF])

Forces images to be displayed in the viewfinder.

[LCD/VF DETAIL]

([LCD/VF DETAIL])

Adjusts the intensity for the contour of the video in the viewfinder or LCD monitor to make it easier to focus.

[AUDIO OUT]

([AUDIO OUT])

Switches the audio channel and the format to output from the headphone terminal and the built-in speaker.

Each time you either press the USER button or touch the USER button icon, the audio channel and the format switch in the order [CH1], [CH2], [CH1/2 STEREO], [CH1/2 MIX].

[FACE DETECT]

([FACE DETECT])

Switches enable/disable of the face detection AE&AF function.

[MENU]

([MENU])

Switches display/hide of the menu.

[LOAD SETUP FILE]

([LOAD SETUP FILE])

Selects the setup file saved on the memory card to load on the unit.

[LCD BACKLIGHT]

([LCD BACKLIGHT])

Switches the brightness of the LCD monitor. Each time you either press the USER button or touch the USER button icon, the brightness switches in the order [0], [1], [2], [-1].

[CARD READER MODE]

([CARD READER MODE])

Switches enable/disable of the card reader mode function (USB mass storage function).

Release the connection to enable the card reader mode when connected to a network via a wireless LAN. (The unit returns to the original setting when the card reader mode is disabled.)

[STREAMING START]

([STREAMING START])

Starts/stops streaming from the unit.

Streaming starts only during RTMP streaming.