Mode check display

The unit’s settings and status can be displayed on the viewfinder or LCD monitor screen for check.

Press the <DISP/MODE CHK> button for 1 second or more while displaying the camera image screen to display the STATUS screen of the mode check.

Each time you press the <DISP/MODE CHK> button, the display switches in the order STATUS screen, FUNCTION screen, AUDIO screen, SWITCH screen, NETWORK screen, camera image screen.

Each screen of the mode check is displayed for approximately 5 seconds.

The screen does not switch while the <DISP/MODE CHK> button is pressed.

Press the <EXIT> button while each screen is displayed to return to the camera image screen.

The mode check screen cannot be displayed even when you press the <DISP/MODE CHK> button in the following case:

– When the [VIDEO OUT/LCD/VF] menu [LCD] [SELF SHOOT] [MIRROR] is set and the LCD monitor is rotated toward the lens (when mirror shooting)

character_diamond FUNCTION screen

Displays the video output settings and information of the recording media.

For the icon_model-x2

Item		Description
[VIDEO OUT]	[VIDEO OUT SEL]	Displays the external output destination. [SDI+HDMI]: When [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [SDI + HDMI OUTPUT] is set to [ON] [SDI]: When [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [EXTERNAL OUT SEL] is set to [SDI] [HDMI]: When [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [EXTERNAL OUT SEL] is set to [HDMI]
	[SDI OUT FORMAT]	Displays with [1920×1080p]/[1920×1080i]/[1920×1080PsF]/[1280×720p] the signals output through the <SDI OUT> terminal.
	[SDI OUT CHAR]	Displays with [ON]/[OFF] whether the characters output through the <SDI OUT> terminal are superimposed.
	[HDMI OUT FORMAT]	Displays with [3840×2160p]/[3840×2160p(420/8bit)]/[1920×1080p]/[1920×1080i]/[1280×720p]/[720×480p]/[720×576p] the signals output through the <HDMI> terminal.
	[HDMI OUT CHAR]	Displays with [ON]/[OFF] whether the characters output through the <HDMI> terminal are superimposed.
[HDR/SDR] (When [SCENE FILE] menu [GAMMA MODE SEL] is set to anything other than [V-Log])	[SDI OUT]	Images output from the <SDI OUT> terminal are displayed with [HDR]/[SDR]. Displays with [SDR] in the following cases: – When [SCENE FILE] menu [GAMMA MODE SEL] is set to anything other than [HLG] – When [VIDEO OUT/LCD/VF] menu [SDI SETTING] [SDI OUT HDR] is set to anything other than [HDR] Displays with [---] in the following case: – When the [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] setting is HDMI output
	[HDMI OUT]	Images output from the <HDMI> terminal are displayed with [HDR]/[SDR]. Displays with [SDR] in the following cases: – When [SCENE FILE] menu [GAMMA MODE SEL] is set to anything other than [HLG] – When [VIDEO OUT/LCD/VF] menu [HDMI SETTING] [HDMI OUT HDR] is set to anything other than [HDR] Displays with [---] in the following case: – When the [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] setting is SDI output
	[LCD/VF]	Images output from the LCD monitor and viewfinder are displayed with [HDR]/[SDR].
[V-Log/709] (When [SCENE FILE] menu [GAMMA MODE SEL] is set to [V-Log])	[SDI OUT]	Images output from the <SDI OUT> terminal are displayed with [V-Log]/[V-709]. Displays with [V-709] in the following case: – When [VIDEO OUT/LCD/VF] menu [SDI SETTING] [SDI OUT V-Log] is set to anything other than [V-Log] Displays with [---] in the following case: – When the [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] setting is HDMI output
	[HDMI OUT]	Images output from the <HDMI> terminal are displayed with [V-Log]/[V-709]. Displays with [V-709] in the following case: – When [VIDEO OUT/LCD/VF] menu [HDMI SETTING] [HDMI OUT V-Log] is set to anything other than [V-Log] Displays with [---] in the following case: – When the [VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] setting is SDI output
	[LCD/VF]	Images output from the LCD monitor and viewfinder are displayed with [V-Log]/[V-709].
[CARD STATUS]	—	Displays the status, remaining recording capacity, and the total capacity of the memory card inserted in the card slot. The status of the memory card that is displayed are following types. [NO CARD]: Memory card is not inserted. [UNSUPPORTED]: Memory card is not supported. [FORMAT ERROR]: Memory card cannot be used. (Format error) [PROTECTED]: It is write protected. (The write-protection switch of the memory card is set to the LOCK side) [NO REMAIN]: There is no remaining recording capacity. [NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4 recording. Cases other than above: The remaining recording capacity is displayed in 0 % through 100 %.







	[TOTAL]	Displays the remaining recording capacity/total capacity of the memory cards in the card slot 1 and the card slot 2.
	[SLOT1]	Displays the status and remaining recording capacity/total capacity of the memory card in card slot 1.
	[SLOT2]	Displays the status and remaining recording capacity/total capacity of the memory card in card slot 2.

For the icon_model-x20

Item		Description
[VIDEO OUT]	[VIDEO OUT FORMAT]	Displays with [3840×2160p]/[3840×2160p(420/8bit)]/[1920×1080p]/[1920×1080i]/[1280×720p]/[720×480p]/[720×576p] the signals output through the <HDMI> terminal.
[VIDEO OUT]	[VIDEO OUT CHAR]	Displays with [ON]/[OFF] whether the characters output through the <HDMI> terminal are superimposed.
[CARD STATUS]	—	Displays the status, remaining recording capacity, and the total capacity of the memory card inserted in the card slot. The status of the memory card that is displayed are following types. [NO CARD]: Memory card is not inserted. [UNSUPPORTED]: Memory card is not supported. [FORMAT ERROR]: Memory card cannot be used. (Format error) [PROTECTED]: It is write protected. (The write-protection switch of the memory card is set to the LOCK side) [NO REMAIN]: There is no remaining recording capacity. [NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4 recording. Cases other than above: The remaining recording capacity is displayed in 0 % through 100 %.







	[TOTAL]	Displays the remaining recording capacity/total capacity of the memory cards in the card slot 1 and the card slot 2.
	[SLOT1]	Displays the status and remaining recording capacity/total capacity of the memory card in card slot 1.
	[SLOT2]	Displays the status and remaining recording capacity/total capacity of the memory card in card slot 2.

character_diamond AUDIO screen

Displays the audio input/output settings and the audio level meter.

Item			Description
[AUDIO]	[AUDIO OUT]		Displays with [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] the audio channel format output from the headphone jack and the built-in speaker.
	[SELECT]	[CH1]/[CH2]	Displays the audio recorded to each channel with [INT(L)]/[INT(R)]/[INPUT1]/[INPUT2].
	[LINE/MIC]	[CH1]/[CH2]	Displays the audio input signal for each channel with [LINE]/[MIC]/[MIC+48V]. When either [INT(L)] or [INT(R)] is selected as the recorded audio, [---] is displayed.
	[LEVEL]	[CH1]/[CH2]	Displays the adjustment method of the recording level of the audio for each channel with [AUTO]/[MANU].
	[LIMITER]	[CH1]/[CH2]	Displays enable/disable of limiter for each channel with [ON]/[OFF]. Displays [---] when the adjustment method of the recording level of the audio is set to [AUTO].
	[LOWCUT]	[CH1]/[CH2]	Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
	Audio level meter		Enlarges the display of the audio level meter displayed on the camera image screen.

character_diamond SWITCH screen

Displays the values assigned to the USER switch, super gain, and white balance.

Item		Description
[USER SW]	[1] to [9]	Displays the function assigned to <USER1> through <USER9> buttons.
[OTHER ASSIGN]	[S.GAIN]	Displays the list of gain values assigned as a super gain.
	[WHITE BAL A]	Displays the color temperature of the “Ach” of the white balance. Displays [ATW] when the auto tracking white balance function is assigned.
	[WHITE BAL B]	Displays the color temperature of the “Bch” of the white balance. Displays [ATW] when the auto tracking white balance function is assigned.
	[WHITE BAL PRST]	Displays the color temperature assigned to the “Preset” of white balance. Displays [ATW] when the auto tracking white balance function is assigned. Color temperature and [VAR] are displayed when “VAR” is assigned.

character_diamond NETWORK screen

Displays the settings of the network function.

Displayed when using .

Displayed when using .

Item		Description
[NETWORK]	[DEVICE SEL]	Displays the device used for network connection in [LAN] (wired LAN)1/[USB-LAN] (wired LAN)2/[WLAN] (wireless LAN)/[USB TETHERING] (USB tethering)1/[OFF] (Off).
	[NETWORK FUNC]	Displays the network function of the unit with [STREAMING]/[OFF].
	[STRM PROTOCOL]	Displays the [NETWORK] menu [STREAMING] [STREAMING PROTOCOL] setting value as [RTMP(S)]/[RTSP].
	[STRM FORMAT]	Displays the streaming format. It is not displayed when set to the [NETWORK] menu [NETWORK FUNC] [OFF].
	[IP REMOTE]	Displays enable/disable of the IP remote function with [ENABLE]/[DISABLE].
	[IPv4 ADDRESS]	Displays the IP address of IPv4. It is not displayed when set to the [NETWORK] menu [DEVICE SEL] [OFF].
	[IPv6 ADDRESS]	Displays the IP address of IPv6. (For the ) [DISABLE] is displayed when the [NETWORK] menu [LAN IPv6 SETTING] [ENABLE/DISABLE] [DISABLE] is set. It is not displayed when the [NETWORK] menu [DEVICE SEL] is set to anything other than [LAN]. (For the ) [DISABLE] is displayed when the [NETWORK] menu [USB-LAN IPv6 SETTING] [ENABLE/DISABLE] [DISABLE] is set. It is not displayed when the [NETWORK] menu [DEVICE SEL] is set to anything other than [USB-LAN].