Panasonic | HC-X2/HC-X20/HC-X2GGD/HC-X20GGD | Operating Instructions | Format that can be output from the HDMI terminal

Output format
Format that can be output from the HDMI terminal

Format that can be output from the HDMI terminal

The format that can be output from the <HDMI> terminal differs with following combination of the settings.

[SYSTEM] menu [FREQUENCY]

[SYSTEM] menu [FILE FORMAT]

[SYSTEM] menu [REC FORMAT]

(For the icon_model-x2 )

[VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [HDMI OUT FORMAT]

(For the icon_model-x20 )

[VIDEO OUT/LCD/VF] menu [HDMI OUT] [OUT FORMAT]

(For the icon_model-x2 )

Set to the following settings in the menus when outputting only to the <HDMI> terminal.

[VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [SDI + HDMI OUTPUT] [OFF]

[VIDEO OUT/LCD/VF] menu [VIDEO OUT SEL] [EXTERNAL OUT SEL] [HDMI]

It is also possible to output to both the <SDI OUT> terminal and the <HDMI> terminal. ( character_reference Note regarding simultaneous output to the SDI OUT terminal and the HDMI terminal [X2])

character_diamond When the [FREQUENCY] is set to [59.94Hz]

[REC FORMAT]		[HDMI OUT FORMAT]: Output Format
Resolution	Frame rate
3840×2160	59.94p	[3840×2160p]: 3840×2160/59.94p 4:2:2 10 bit [3840×2160p(420/8bit)]: 3840×2160/59.94p 4:2:0 8 bit [1920×1080p]1: 1920×1080/59.94p 4:2:2 10 bit [1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit
	29.97p	[3840×2160p]: 3840×2160/29.97p 4:2:2 10 bit [1920×1080p]1: 1920×1080/29.97p 4:2:2 10 bit
	23.98p	[3840×2160p]: 3840×2160/23.98p 4:2:2 10 bit [1920×1080p]1: 1920×1080/23.98p 4:2:2 10 bit
1920×1080	59.94p	[1920×1080p]1: 1920×1080/59.94p 4:2:2 10 bit [1920×1080i]: 1920×1080/59.94i 4:2:2 10 bit [720×480p]2: 720×480/59.94p 4:2:2 10 bit
	59.94i	[1920×1080i]1: 1920×1080/59.94i 4:2:2 10 bit [720×480p]2: 720×480/59.94p 4:2:2 10 bit
	29.97p	[1920×1080p]: 1920×1080/29.97p 4:2:2 10 bit
	23.98p	[1920×1080p]1: 1920×1080/23.98p 4:2:2 10 bit [720×480p]2: 720×480/59.94p 4:2:2 10 bit
1280×720	59.94p	[1280×720p]1: 1280×720/59.94p 4:2:2 10 bit [720×480p]2: 720×480/59.94p 4:2:2 10 bit

character_diamond When the [FREQUENCY] is set to [50.00Hz]

[REC FORMAT]		[HDMI OUT FORMAT]: Output Format
Resolution	Frame rate
3840×2160	50.00p	[3840×2160p]: 3840×2160/50.00p 4:2:2 10 bit [3840×2160p(420/8bit)]: 3840×2160/50.00p 4:2:0 8 bit [1920×1080p]1: 1920×1080/50.00p 4:2:2 10 bit [1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit
	25.00p	[3840×2160p]: 3840×2160/25.00p 4:2:2 10 bit [1920×1080p]1: 1920×1080/25.00p 4:2:2 10 bit
1920×1080	50.00p	[1920×1080p]1: 1920×1080/50.00p 4:2:2 10 bit [1920×1080i]: 1920×1080/50.00i 4:2:2 10 bit [720×576p]2: 720×576/50.00p 4:2:2 10 bit
	50.00i	[1920×1080i]1: 1920×1080/50.00i 4:2:2 10 bit [720×576p]2: 720×576/50.00p 4:2:2 10 bit
	25.00p	[1920×1080p]: 1920×1080/25.00p 4:2:2 10 bit
1280×720	50.00p	[1280×720p]1: 1280×720/50.00p 4:2:2 10 bit [720×576p]2: 720×576/50.00p 4:2:2 10 bit

Factory setting

Can be selected when [FILE FORMAT] is [AVCHD].

[HDMI OUT FORMAT]/[OUT FORMAT] restores the factory settings when the settings of [FREQUENCY] and [REC FORMAT] change and the current setting values of [HDMI OUT FORMAT]/[OUT FORMAT] cannot be acquired.

The output format when playing back from the thumbnail screen is as follows.

– It will be the value set in [HDMI OUT FORMAT]/[OUT FORMAT] when the recording resolution of the playback clip is the same as [REC FORMAT].

– It will be factory setting of [HDMI OUT FORMAT]/[OUT FORMAT] when the recording resolution of the playback clip is different from [REC FORMAT].

When either [720×480p] or [720×576p] is selected, images are output compressed horizontally so that they fit within the screen.

There may be a fews seconds of images not displayed on the external device when the clips are changing over, etc.