Panasonic

Dual codec recording [X2]

You can make main and sub recordings simultaneously in separate [REC FORMAT] settings.

Sub recording records scenes in a picture quality lower than that of the [REC FORMAT] setting for main recording.


co_other_dual-codec_rec

(A) Card slot 1 (main recording)

(B) Card slot 2 (sub recording)

(C) Start recording

(D) Pause


  1. Recording

  1. Recording in low picture quality


  1. Select [SYSTEM] menu character_arrow [FILE FORMAT] character_arrow [MOV].

  1. Set [REC FORMAT] and [DUAL CODEC SETTING].

[SYSTEM] menu character_arrow [REC FORMAT]

[RECORDING] menu character_arrow [DUAL CODEC SETTING]

bullet02For details about the setting items (character_referenceNote regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with dual codec recording)

bullet02The settings for clips recorded on the sub recording side will be as follows:

– Recording is in the MOV format.

– Recording is at FHD (1920×1080)

– The recorded frame rate will be the same as the recording format on the main recording side.

  1. Select [RECORDING] menu character_arrow [2 SLOTS FUNC.] character_arrow [DUAL CODEC REC].

Either [DUAL 50M] or [DUAL 8M] is displayed in the 2-slot function display on the camera image screen.

When dual codec recording is not possible, such as when a memory card has not been inserted in card slot 2, the display for [DUAL 50M]/[DUAL 8M] will appear crossed out.

  1. Press the REC button.


bullet02Recording cannot start if there is no recordable memory card in card slot 1.

bullet02Normal recording is performed to card slot 1 in the following cases:

– There is no recordable memory card in card slot 2

– There is no remaining space on the memory card in card slot 2

bullet02Recording on the main recording side does not stop even if there is an error with the memory card on the sub recording side.

Recording stops if there is an error with the memory card on the main recording side.

bullet02If clips are automatically divided during recording on the main recording side, dividing occurs on the sub recording side at the same timing as on the main recording side. (character_referenceRecording time of the memory card)

bullet02Dual codec recording is not possible in the following cases:

– When [SYSTEM] menu character_arrow [FILE FORMAT] is set to other than [MOV]

– When [SYSTEM] menu character_arrow [REC FORMAT] is set to an item that does not support dual codec recording (character_referenceNote regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with dual codec recording)

bullet02The following USER button functions are not available when dual codec recording is set:

– [REC CHECK]

– [DEL LAST CLIP]

– [SLOT SEL]

bullet02There are recording functions that cannot be used simultaneously. (character_referenceRecording function that cannot be used simultaneously)


character_diamondNote regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with dual codec recording

bullet02When [DUAL CODEC SETTING] is set to [FHD 50Mbps]

[FREQUENCY]

[REC FORMAT]

Bit rate of sub recording

[59.94Hz]

[2160-29.97p/420LongGOP 100M], [2160-23.98p/420LongGOP 100M]

50 Mbps

[50.00Hz]

[2160-25.00p/420LongGOP 100M]


bullet02When [DUAL CODEC SETTING] is set to [FHD 8Mbps]

[FREQUENCY]

[REC FORMAT]

Bit rate of sub recording

[59.94Hz]

[2160-29.97p/420LongGOP 100M], [2160-23.98p/420LongGOP 100M], [1080-59.94p/422ALL-I 200M], [1080-59.94p/422LongGOP 100M], [1080-59.94i/422ALL-I 100M], [1080-29.97p/422ALL-I 100M], [1080-23.98p/422ALL-I 100M]

8 Mbps

[50.00Hz]

[2160-25.00p/420LongGOP 100M], [1080-50.00p/422ALL-I 200M], [1080-50.00p/422LongGOP 100M], [1080-50.00i/422ALL-I 100M], [1080-25.00p/422ALL-I 100M]


bullet02To set [DUAL CODEC SETTING], make the following menu settings beforehand:

– [SCENE FILE] menu character_arrow [VFR] character_arrow [OFF]

– [RECORDING] menu character_arrow [REC FUNCTION] character_arrow [REC MODE] character_arrow [NORMAL]

– [NETWORK] menu character_arrow [NETWORK FUNC] character_arrow [OFF]

– [SYSTEM] menu character_arrow [FILE FORMAT] character_arrow [MOV]

– [SYSTEM] menu character_arrow [SUPER SLOW] character_arrow [OFF]

bullet02To set [DUAL CODEC SETTING] to [FHD 50Mbps], make the following menu setting beforehand:

– In [SYSTEM] menu character_arrow [REC FORMAT], set to the UHD (3840×2160) item