Panasonic

Zebra patterns display

The unit can display 2 types of zebra patterns to the output image from the LCD monitor.

  1. Select the [VIDEO OUT/LCD/VF] menu character_arrow [EI ASSIST] character_arrow [ZEBRA] character_arrow [ON].

bullet02You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra pattern and switch display/hide.

This changes depending on the [VIDEO OUT/LCD/VF] menu character_arrow [EI ASSIST] character_arrow [ZEBRA] settings.

[ZEBRA] settings

Operation when the USER button is pressed

[MOMENT]

Displays the zebra pattern for approximately 5 seconds.

[ON], [OFF]

Switches display/hide of the zebra pattern.


character_diamondSetting the detection level

  1. Set each item in the [VIDEO OUT/LCD/VF] menu character_arrow [EI ASSIST].


[ZEBRA1 DETECT]:

Sets the detection level of zebra pattern 1.

[50%]…[105%]


[ZEBRA2 DETECT]:

Sets the detection level of zebra pattern 2.

[50%]…[105%]


[ZEBRA2]:

Switches enable/disable of zebra pattern 2.

[ON], [OFF]



character_diamondDisplay area of the zebra pattern

The display area of the zebra pattern varies depending on the [VIDEO OUT/LCD/VF] menu character_arrow [EI ASSIST] setting.

co_other_zebra

(A) [ZEBRA2]

(B) [ZEBRA2 DETECT]

(C) [ZEBRA1 DETECT]

  1. [ON]

  1. [OFF]


bullet02The zebra pattern cannot be recorded.

bullet02To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra pattern is no longer displayed. (character_referenceIris, Gain, Setting the shutter speed)

bullet02(For the icon_model-x2)

The zebra pattern is not displayed when the [SCENE FILE] menu character_arrow [GAMMA MODE SEL] character_arrow [HLG]/[V-Log] is set.