Format that can be output from the SDI OUT terminal [X2]
The format that can be output from the <SDI OUT> terminal differs with following combination of the settings.
[SYSTEM] menu
[FREQUENCY]
[SYSTEM] menu
[REC FORMAT]
[VIDEO OUT/LCD/VF] menu
[VIDEO OUT SEL]
[SDI OUT FORMAT]
Set to the following settings in the menus when outputting only to the <SDI OUT> terminal.
[VIDEO OUT/LCD/VF] menu
[VIDEO OUT SEL]
[SDI + HDMI OUTPUT]
[OFF]
[VIDEO OUT/LCD/VF] menu
[VIDEO OUT SEL]
[EXTERNAL OUT SEL]
[SDI]
It is also possible to output to both the <SDI OUT> terminal and the <HDMI> terminal. (Note regarding simultaneous output to the SDI OUT terminal and the HDMI terminal [X2])
When the [FREQUENCY] is set to [59.94Hz]
When the [FREQUENCY] is set to [50.00Hz]
-
Factory setting
– It will be the value set in [SDI OUT FORMAT] when the recording resolution of the playback clip is the same as [REC FORMAT]. – It will be factory setting of [SDI OUT FORMAT] when the recording resolution of the playback clip is different from [REC FORMAT].
|