Black balance adjustment

Black balance must be adjusted in the following instances:

When the unit is used for the first time

When used after a long period of time without use

When the ambient temperature has changed considerably

When super gain is set with the USER button

When changing the gain values

When switching items in the [SYSTEM] menu [REC FORMAT].

To shoot optimum video, we recommend adjusting the black balance immediately before shooting.

Before adjusting the black balance, prepare the conditions for adjusting the white balance.

Switch to manual mode with the <AUTO/MANU> switch. (About auto mode/manual mode)

Press the <WHITE BAL> button to switch to “Ach” or “Bch”.

Each time you press the button, the white balance switches in the order “Preset”, “Ach”, “Bch”.

Either press and hold the USER button assigned to [AWB] for approximately 2 seconds or touch and hold the USER button icon for approximately 2 seconds.

After adjustment of the black balance, white balance is then adjusted, and the black balance/white balance adjustment values are memorized.

If white balance has been set elsewhere other than in “Ach” and “Bch”, then only the black balance is adjusted.

character_diamond Messages displayed in the viewfinder and LCD monitor

Status	Message	Remark
During adjustment	[ABB ACTIVE]	—
Adjustment completed	[ABB OK]	The adjusted value is automatically stored in the specified memory (A or B).

The content previously set is maintained in “Ach” or “Bch”. Make the settings again if the lighting conditions have changed.

During black balance adjustment, the aperture is set to automatically shut out light.

During recording, black balance cannot be adjusted.

Video is not recorded to the memory card even if the REC button is pressed while executing the automatic black balance.

While adjusting the black balance, the gain circuitry in the device automatically switches to perform adjustments. Flicker or noise sometimes appears on the viewfinder screen and LCD monitor. This is not a malfunction.

character_diamond Black balance memory

Values stored to memory are saved even if the unit is turned off.