[Normal Play] / [Picture Only] / [Video Only] / [Rating]

Filters the type of images to play back.

When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.].

[All] / [Picture Only] / [Video Only] / [Rating]

Selects image types and plays them back at regular intervals in order.

When you have set [Rating], put a check mark in the rating level you want to display, then press [DISP.].

[Start]: Starts slide show playback.

[Duration]: Sets repeat playback.

[Repeat]: Sets repeat playback.

Operations during slide show

: Plays/pauses (You can also perform the same operation by touching [] or [])

: Move to the previous image

: Move to the next image

: Ends the slide show

: Adjusts the volume

When [Video Only] is set, [Duration] is not available.

[ON] / [OFF]

Automatically displays pictures vertically if they were recorded when holding the camera vertically.

[FILE NAME] / [DATE/TIME]

This sets the order in which the camera displays images during playback.

[FILE NAME]: Displays images by folder name/file name.

[DATE/TIME]: Displays images by recording date.

If you insert another card, it may take some time to read all data, therefore pictures may not be displayed in the set order.

[ON] / [OFF]

Displays the point focused with AF.

Enlarges the AF focus location when enlarging the image.

The center of the image is enlarged for RAW images recorded in the High Resolution mode or when the image is not focused.

[ON] / [OFF]

When playing back images recorded with [Photo Style] set to [V-Log], this displays the images with LUT file applied on the monitor.

This functions in tandem with [LUT View Assist (Monitor)] in [Log View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. ([Log View Assist])

[MODE1] / [MODE2] / [OFF]

At recording or playback of HLG video, this converts their color gamut and brightness for display.

This functions in tandem with [Monitor] in [HLG View Assist] in the [Custom] ([Monitor / Display (Video)]) menu. ([HLG View Assist])

[] / [] / [] / [] / [] / [OFF]

This displays the desqueezed images suited to the magnification of the anamorphic lens on this camera.

This is linked with [Anamorphic Desqueeze Display] under the [Custom] ([Monitor / Display (Video)]) menu. ([Anamorphic Desqueeze Display])

[End Playback] / [Pause At Last Frame]

Sets the operation for when playback of video finishes.

[End Playback]: Ends video playback and returns to the image selection screen.

[Pause At Last Frame]: Does not end video playback, but pauses on the final frame. To end video playback, press .

Processes pictures taken in RAW format on the camera and saves them in JPEG format.

([RAW Processing])

This creates videos from group images recorded with [Time Lapse Shot].

1. Press to select a [Time Lapse Shot] group and then press .

2. Select the options for creating a video to combine the pictures into a video. (Time Lapse Shot/Stop Motion Animation Videos)

When [System Frequency] is set to [24.00Hz (CINEMA)], [Time Lapse Video] is not available.

This creates videos from group images recorded with [Stop Motion Animation].

1. Press to select the Stop Motion Animation group and then press .

2. Select the options for creating a video to combine the pictures into a video. (Time Lapse Shot/Stop Motion Animation Videos)

When [System Frequency] is set to [24.00Hz (CINEMA)], [Stop Motion Video] is not available.

[Single] / [Multi] / [Cancel]

You can set protection for images so that they will not be deleted by mistake.

However, if you format the card, the protected images will also be deleted.

For information about how to select images (How to Select an Image(s) in the [Playback] Menu)

Be careful because the [Protect] setting may be disabled on a device other than this camera.

[Single] / [Multi] / [Cancel]

If you set any of the five different rating levels for images, you can do the following:

Deleting all images except for those with ratings.

Use the file details view on a PC, etc., to check the rating level. (JPEG images only)

1. Select an image. (How to Select an Image(s) in the [Playback] Menu)

2. Press to select a rating level (1 to 5) and then press .

When [Multi] is selected, repeat Steps 1 and 2.

To cancel the setting, set the rating level to [OFF].

[Single] / [Multi]

Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments.

For information about how to select images (How to Select an Image(s) in the [Playback] Menu)

– When [Single] is selected, after choosing the image, press to select the size, then press .

– When [Multi] is selected, before choosing the images, press to select the size, then press .

You can set up to 100 images at once with [Multi].

The image quality of the resized image becomes lower.

[Resize] is not available for images recorded using the following functions:

– Video recording

– Group images

– [65:24]/[2:1] ([Aspect Ratio])

– [RAW] ([Picture Quality])

– Pictures created from [C4K] video

– [XS] ([Picture Size])

Rotate images manually in 90 steps.

[]: Rotates 90 clockwise.

[]: Rotates 90 counter-clockwise.

For information about how to select images (How to Select an Image(s) in the [Playback] Menu)

When [Rotate Disp.] is [OFF], [Rotate] is not available.

Divide a recorded video into two.

([Video Divide])

When recording does not finish normally for some reason, it is possible to repair the video file. ([Video Repair])

["Yes" first] / ["No" first]

This sets which option, [Yes] or [No], will be highlighted first when the confirmation screen for deleting an image is displayed.

["Yes" first]: [Yes] is highlighted first.

["No" first]: [No] is highlighted first.

Deleting all images in a card.

Images cannot be restored once they have been deleted. Carefully confirm the images before deletion.

If you select [Delete All Non-rating], all images except those with a rating set are deleted.

[Delete All Images] can be used when [Playback Mode] is set to [Normal Play].