Video Brightness and Coloring
Recording While Controlling Overexposure (Knee)
[Luminance Level]
You can set the luminance range to suit the purpose of video recording.
You can set to [16-235] or [16-255], the standard for video, or to [0-255], which covers the entire range of luminance, the same as pictures.
[
] [
] Select [Luminance Level]
[0-255]([0-1023])
Setting for video recording at full range.
[16-235]([64-940])
Setting for video recording at video range.
[16-255]([64-1023])
Setting for video recording at video range.
The display may not show the correct gradation depending on the monitor, the video playback software, and the video editing software that you are using.
|
However, even if [Photo Style] is set to [REAL TIME LUT](base Photo Style is [V-Log]) or Photo Style is set to [V-Log] in My Photo Style, if the [Vlog_709] LUT file has been applied, this is fixed to [16-255] ([64-1023]).
|
[Master Pedestal Level]
You can adjust the black level, which serves as the reference for images.
-
Set the recording mode to [
] or [S&Q].
Set the mode dial. (
Selecting the Recording Mode)
-
Select [Master Pedestal Level].
[] [
] [Master Pedestal Level]
-
Adjust master pedestal.
Rotate 
or 
.
Set in the range between −15 and +15.
|
– [V-Log]/[REAL TIME LUT](base Photo Style is [V-Log]) ([Photo Style]) |
Recording While Controlling Overexposure (Knee)
When [Photo Style] is set to [Like709], you can adjust the knee so that recording can be performed with minimal overexposure.
-
Set [Photo Style] to [Like709].
[] [] [Photo Style] [Like709]
-
Press [Q].
-
Select a knee setting.
Press 
to select a setting item.
[AUTO]
Adjusts the compression levels of high-luminance areas automatically.
[MANUAL]
You can set the luminance where compression starts (knee master point) and the intensity of compression (knee master slope).
Press 
to select an item and then press to adjust.
[POINT]: Master knee point
[SLOPE]: Master knee slope
Rotate to adjust the knee master point, and to adjust the knee master slope.
Values within the following ranges can be set:
– Master knee point: 80.0 to 107.0
– Master knee slope: 0 to 99
[Off]
-
Confirm your selection.
Press .
[ISO Sensitivity (video)]
Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].
-
Set the recording mode to [
] or [S&Q].
Set the mode dial. (Selecting the Recording Mode)
-
Set [ISO Sensitivity (video)].
[] [] [ISO Sensitivity (video)]
Setting Items ([ISO Sensitivity (video)])
[ISO Auto Lower Limit Setting]
Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO].
Set in the range between [100] and [25600].
[ISO Auto Upper Limit Setting]
Sets the upper limit for ISO sensitivity when ISO sensitivity is [AUTO].
Set to [AUTO] or in the range between [200] and [51200].
|
|