Panasonic

Inserting Cards (Optional)

icon_care_s

bullet02Format the cards with the camera before use. (character_reference[Card Format])


image_card-insert-1_qg

image_card-insert-2_qg

image_card-insert-3_qg


bullet02Match the orientation of the cards as shown in the figure and then insert them firmly until they click.


icon_related-info_s

bullet02You can set the folder and file name where to save the images:

(character_reference[Folder / File Settings])


character_diamondCard Access Indications

The card access light turns on while the card is being accessed.

image_access-lamp


icon_info_s

bullet02The card may be warm just after the camera has been used.

bullet02Do not perform the following operations during access.

The camera may operate incorrectly or the card and recorded images may be damaged.

– Turn off the camera.

– Remove the battery or card or disconnect the power plug.

– Subject the camera to vibration, impacts, or static electricity.


character_diamondRemoving a Card

image_remove-card

  1. Open the card door.

  1. Push the card until it clicks and then pull the card out straight.

bullet02Check that the card access lights are off before removing the card.