Attaching a Lens

Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens (Dirt on the image sensor)

Change the lens while the lens cap is attached.

1Turn the camera off.

Press and hold the camera ON/OFF button for more than two seconds.

2Turn the lens rear cap and the body cap in the direction of the arrow to remove them.

img_ch2_10

 

img_ch2_11

 

3Align the lens fitting marks on the lens and camera and then rotate the lens in the direction of the arrow.

Attach the lens by rotating it until it clicks.

img_ch2_12

arrow_right

img_ch2_13

 

maru_alphabet_aLens fitting mark

 

Removing a Lens

number_k_01Turn the camera off.

Press and hold the camera ON/OFF button for more than two seconds.

number_k_02While pressing the lens release button, rotate the lens in the direction of the arrow until it stops and then remove it.

img_ch2_14

 

maru_alphabet_bLens release button